More From Contributor

£40.99
The Kube is a Micro ATX cube case with outstanding design supplied with HD audio 2 x USB20 1 x USB30 & TFSD Card Reader located at the top of the front panel for ease of access for the user The exterior has a soft touch rubber coating for a more elegant design The interior has a black & blue colouring to add to the overall look of the case The windowed side panels (both side panels) allow for viewing of the interior components along with any additional styling LEDs applied to the computer The powerful cooling system within the Kube can be upgraded to suit your needs Supplied with 1 x 200mm front blue LED fan & 1 x 120mm rear fan with the advantage of adding 1 x 80mm rear fan 2 x 120mm or 2 x 140mm top fans The Kube is also water cooling ready with push out holes for the pipes (at the rear of the case) & the ability to add a water cooling radiator as opposed to 2 fans at the top of the case Micro-ATX gaming case
- Micro-ATX gaming case with a powerful cooling system IO ports
- Comes with HD Audio & 2 x USB (Universal Serial Bus) 20 & 1 x USB30 Card-reader
- TFSD card-reader Large Graphics Card Support
- Compatible with long VGA cards up to 340mm Cooling System
- Comes complete with 1 x 200mm Blue LED front fan & 1 x 120mm rear fan with the ability to add 1 x 80mm rear fan & 2 x 120 140mm top fans




...
Archived Product
£34.49
300W Micro ATX Standard PSU Fitted Excellent EMI protection design Refined design with folded metal edges for safe assembly Sturdy structure Form Factor Mini ITX Motherboard Support Mini ITX PSU Support Micro ATX PSU Location None Gaming Case No Water Cooling Not Water Cooling Ready Body Material 07mm SECC Front Bezel Material Plastic Side Panel Vented External Bays 1 x 35” External 1 x Slimline Optical Internal Bays 1 x 35” Internal 2 x 25” Internal Drive Bay Notes Internal 1 x 35" bays or 2 x 25" bays Expansion Slots Cooling Front 1 x 6cm Fan Cooling Top Vent Cooling Rear Vent Cooling Side Vent Cooling Bottom Vent IO Ports 2 x USB (Universal Serial Bus) 20 1 x IEEE1394 Firewire 1 x HD Audio 1 x Microphone Front Bezel Colour Matte Black & Gloss Black Body Colour Matte Black System Cabinet Features PSU Included Yes ...
Archived Product
£44.99
The Ci T MTX-007B is an Ultra Mini i TX VESA Mountable Case With Space Saving Features the MTX-007B can be easily mounted on to the rear of your monitor With a Dual Layer Interior Structure support for Intel i 5 & i 7 CPUs & an internal 180W PSU the MTX-007B is a fantastic choice for a Mini ITX Mountable Case Key Features
- Space saving
- With a width of the case being 8cm this can be easily mounted on to the rear of your LCD LED monitor using the VESA mount (provided) creating more desk space
- Dual Layer Interior Structure
- This case utilises its advanced dual layer interior allowing for support of a slim ODD HDD & 3 in 1 card reader
- Supports i 5 i 7
- Fully supports the Intel i 5 & i 7 CPUs including the latest Haswell chipset The mesh side panel offers better cooling
- Internal PSU
- Comes with an internal 180W power supply unit to better suit your needs Cooling Liquid cooling capability No Design Colour of product Black Form factor Mini-Tower Material Plastic SECC Material thickness 05 mm Maximum CPU cooler height 42 cm Number of 25" bays 1 Side window No Suitable for Home Office Supported motherboard form factors Mini-ITX Type PC Packaging data Package depth 265 cm Package height 285 cm Package weight 31kg Package width 131 cm Ports & interfaces Audio input Yes Audio output Yes USB (Universal Serial Bus) 20 ports quantity 2 Power supply Power supply 180 W Power supply included Yes Storage Supported hard disk drive sizes 25" Weight &

Dimensions Depth 221 cm Height 245 cm Weight 23kg Width 95 cm









...
Archived Product
£38.99
Micro-ATX case MXA05
- Micro-ATX wiredrawing front panel standard with USB30 x 1 USB20 x 2 for superspeed Connecting of data transferring
...
Archived Product
£6.99
The compact size of this three-button mouse makes it the perfect notebook accessory Optical technology delivers smooth accurate performance on virtually any surface & the wider scroll wheel lets you move through documents & web sites quickly Box Contains 1 x Mouse ...
Archived Product
£31.99
The Ci T Red Devil is Ci Ts latest Mesh Gaming Case in Black & Red With a Black Red Interior a front-mounted USB (Universal Serial Bus) 30 Port & Tool-less Features the Ci T Red Devil is a well-rounded Mesh Gaming Case Key Features
- Midi tower case
- Midi Tower PC Case with a powerful cooling system
- IO port
- The IO Ports are located on the top of the front panel for easy access comes with HD Audio & 2 x USB (Universal Serial Bus) 20 &1x USB30
- Chassis
- Black & Red interior
- Fan
- 1 x Built-in 12cm Fans (1 x Red LED) will keep your components cool
- Front panel
- Red strips with outstanding design The Front panel is made from mesh steel for high end cooling Cooling Front fans diameters supported 120 mm Front fans installed 1x 120 mm Liquid cooling capability No Maximum front fans 1 Maximum rear fans 1 Maximum side fans 1 Rear fans diameters supported 120 mm Side fans diameters supported 120 mm Design Colour of product Black Red Form factor Midi-Tower Material Plastic SPCC Material thickness 05 mm Number of 25" bays 2 Number of 35" bays 5 Number of 525" bays 2 Number of expansion slots 7 Number of internal 35" bays 4 Side window No Suitable for Gaming Supported motherboard form factors ATX Micro-ATX Mini-ITX Type PC Packaging data Package depth 475 cm Package height 518 cm Package weight 5kg Package width 235 cm Ports & interfaces Audio input Yes Audio output Yes USB (Universal Serial Bus) 20 ports quantity 2 USB (Universal Serial Bus) 30 (31 Gen 1) Type-A ports quantity 1 Power supply Power supply included No Storage Supported hard disk drive sizes 2535" Weight &

Dimensions Depth 475 cm Height 437 cm Weight 4kg Width 203 cm











...
Archived Product
£48.49
Ci T S003B Form factor Micro-Tower Type PC Material Plastic SECC Power supply 300 W Power supply location Front Supported hard disk drive sizes 35" Compatible memory cards SD Width 99 cm Depth 40 cm Height 306 cm Package width 16 cm Package depth 446 cm Package height 368 cm- Built-in Card-Reader
- The Ci T S003 Comes with a 3-in-1 Card-Reader built-in- Comes with 1 x 8cm Top Cooling Fan- Supports Micro ATX Power Supplies- 4 x Half-Height Expansion Slots
...
Archived Product
£35.99
Ci T S014B micro slim case is a case with a very compact design Allowing you to save desk space the S014B front panel is made with mesh details along with a an 8cm fan which is included at the top for the best airflow & the S014B also comes with a silent micro SFX 300W PSU it helps to provide the best performance business PC system Comes with 300W Micro ATX PSUComes with a 1 x 8cm Top Cooling Fan Built-in Card Reader
- SDMMCMS 3in 1 Removeable HDDODD cage for help when assembling your PCFront mesh details for extra airflow Specifications Rail Max DC Output 33V 16A 5V 16A 12V 14A-12V 03A 5VSB 2APSU Connector Qty 20 4 Pin ATX 1 12V 4 Pin CPU 14 Pin Molex 2SATA 3FDD 1 Case Specifications Form Factor Micro ATXMotherboard Support Micro ATX Mini ITXPSU Support Micro ATXPSU Location Front Gaming Case No Water Cooling Not Water Cooling Ready Body Material 05mm SECC Metal Front Bezel Material Plastic Side Panel Vented Internal Cable Management Depth 21mm External Bays 1 x 525” External Internal Bays 2 x 35” Internal 2 x 25” Internal Drive Bay Notes 1 x 25" uses a 35" bay Expansion Slots 4 x Half-Height Cooling Front None Cooling Top Space For 1 x 80mm Fan (inc) Cooling Rear None Cooling Side Vent Cooling Bottom Vent & Space for 1 x 50mm fan (Not Included) or SSDIO Ports 1 x USB (Universal Serial Bus) 302 x USB (Universal Serial Bus) 201 x HD Audio (Also Supports AC&97)1 x Microphone SDTF Card Reader Included (Built-in)GPU Max Length 225mm CPU Cooler Maximum Height 82mm Front Bezel Colour Black Body Colour Black System Cabinet Features PSU Included Yes
...
Archived Product
£33.99
With a design you usually find on higher end cases the Seven pushes the CIT brand in to new territory A MATX case designed with a black plastic anti-dust front panel embraces 2 large RGB strips in the shape of the number 7 The strips can be synced with the rear 120 Single-Ring Halo Spectrum fan that is included giving any PC build a fantastic out of the box RGB & cooling solution that has 14 different colour modes to choose from The Seven also comes with a full acrylic left side panel RGB control button full length PSU shroud & lots of space for cable management making this a fantastic choice for anyone looking to change case Fantastic Design The two large RGB strips located on the front panel with 14 different colour modes create an amazing look that will be the jewel in the crown for any setup Single-Ring Halo Spectrum Fan Included As well as an RGB strip the Seven

Includes::
a 1 x 120mm single-ring Halo Spectrum fan & with room for another seven fans this case will not only look great but has excellent airflow for when your case works that bit harder RGB Strip & Fan Synced The RGB strip & the fan can easily be synced & can be easily changed together using the reset key Water Cooling Support As well as supporting eight fans the Seven supports a radiator up to 240mm at the front Top & a 120mm radiator at the back to give you extensive cooling support Removable Dust Filter A removable dust filter included at the top of the Seven is included helps to prevent dust from getting into your build & helps improve the performance of your chassis Form Factor Micro Tower Motherboard Support Micro ATXMini-ITXPSU Support Standard ATXPSU Location Bottom PSU Included No Water Cooling Ready Yes Supported Radiator Size 240mm Supported Radiator Positions Front Top Material 066mm SPCC Black Coated Plastic RGB Strip Side Panel Full Acrylic Window Drive Bays Internal 35 1 Internal 25 2 Expansion Slots 4 Cooling Support Front 3 x 120mm Fans Top 2 x 120mm Fans Rear 1 x 120mm Fan (1 x 120mm Single-Ring Halo Spectrum Fan included)IO Panel 2 x USB (Universal Serial Bus) 201 x HD Audio 1 x Microphone Clearance GPU Max Length 339mm CPU Cooler Maximum Height 150mm Internal Cable Management Depth 11mm Colour Black What's in the Box Case Screws Product

Dimensions (W x H x D )190mm x 395mm x 381mm Packaging

Dimensions (W x H x D )243mm x 447mm x 435mm Weight Net 31 KGs Gross 39 KGs Channel Pro News Global device shipments set to fall by 136 this year 28 May 2020 1033 Wipro unveils new Global Channel Partner Programme 27 May 2020 1042 Dell puts freeze on salary rises & hiring 27 May 2020 1032HP unveils a host of work-from-home hardware 27 May 2020 0936 Why cloud migration is a perfect storm for security opportunities 26 May 2020 1527IBM & HPE to make &8216;thousands of job cuts&8217;22 May 2020 1111 Colt Technology Services appoints Keri Gilder as new CEO21 May 2020 1115 Are distributors & resellers really on the way out?20 May 2020 1120 Rancher Labs unveils new Kubernetes certification programme 20 May 2020 0949 Computex co-founder Sam Haffar resigns as CEO19 May 2020 1054 Microsoft acquires 5G specialist to accelerate telco push 15 May 2020 1249HPE reveals new CTO role & restructure for post-coronavirus world 14 May 2020 1321 V Mware to acquire Kubernetes security firm Octarine 14 May 2020 1223US reseller partner TBI expands to the UK13 May 2020 1017 Cognizant set to lose up to 70m due to ransomware attack 12 May 2020 1033 View All News Advertise with Stock in the Channel





...
Archived Product
£35.99
Ci T Spectre Gaming Case
- The Spectre is a Midi Tower PC Gaming Case with a powerful cooling system It comes with 2 x Fan Controllers
...
Archived Product

CiT Prism White RGB Case With 2 X RGB Front Fans 1 X USB 3.0 &
Side Window

The CiT Prism is a Midi Tower gaming case with a combination of a metal mesh and semi transparent front panel and with a plastic front door also included makes this different to other CiT models The two 120mm RGB front fans give the Prism a unique style whilst keeping the system cool With the ability to install up to 3 x 120mm fans (2 included at the front and 1 x 120mm fan at the back) and a water cooling kit with a 240mm radiator (which can be positioned at the front) the CiT Prism should keep even the most demanding gaming systems cool The IO Ports are conveniently located at the top of the case giving the user easier access The black coloured interior and the white coloured exterior gives the case an outstanding design With safety in mind the edges of the Prism are all rolled to
minimise any injuries whilst building the system The Prism supports the following motherboard types ATX Micro ATX and Mini iTX Front Panel - The front panel made from metal mesh and a semi transparent front panel along with the underlying 2 RGB fans give the Prism a unique look IO Ports - 2 x USB 20 1 x USB 30 HD Audio located at the top of the case Side Window - Clear side window allowing the user to show off their internal components Large GPU Support - A maximum length of 415mm for graphics cardLarge Cooler Support - A maximum height of 163mm for CPU coolers
RIP - This product is no longer available on our network. It was last seen on 29.08.2020

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£38.49

Product Description

The Ci T Prism is a Midi Tower gaming case with a combination of a metal mesh & semi transparent front panel & with a plastic front door also included makes this different to other Ci T models The two 120mm RGB front fans give the Prism a unique style whilst keeping the system cool With the ability to install up to 3 x 120mm fans (2 included at the front & 1 x 120mm fan at the back) & a water cooling kit with a 240mm radiator (which can be positioned at the front) the Ci T Prism should keep even the most demanding gaming systems cool The IO Ports are conveniently located at the top of the case giving the user easier access The black coloured interior & the white coloured exterior gives the case an outstanding design With safety in mind the edges of the Prism are all rolled to minimise any injuries whilst building the system The Prism supports the following motherboard types ATX Micro ATX & Mini i TX Front Panel
- The front panel made from metal mesh & a semi transparent front panel along with the underlying 2 RGB fans give the Prism a unique look IO Ports
- 2 x USB (Universal Serial Bus) 20 1 x USB (Universal Serial Bus) 30 HD Audio located at the top of the case Side Window
- Clear side window allowing the user to show off their internal components Large GPU Support
- A maximum length of 415mm for graphics card Large Cooler Support
- A maximum height of 163mm for CPU coolers

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

USB - Universal Serial Bus
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
CPU - Central processing unit. The processing centre of computer programs. The faster the processor usually the faster the computer
Plastic - A generic term for a synthetic product used in the manufacture of products
White - A colour combining all colours
water - A chemical substance. Chemical formula H2O.
Graphics - A general term for visual aspects of an item/display
IO - Input/Output - the commpuncation between two devices or between a device and its operator.
MIDI - Musical Instrument Digital Interface - an industry standard to allow devices and musical instrument to interact.
Audio - Also known as sound. An audible vibration wave which can be heard.
Safety - prevents damage being caused.
Components - Multiple items used to complete the product.
USB - Universal Serial Bus. A method of connecting a device to a computer
Large - something that takes up more space than normal.
Radiator - A household item that warms a room.
Install - A process of putting materials together to create a finished product.
Minimise - To reduce or lower the amount of something.
Design - A drawing or styles that shows the look and functionality of something before its made.
Exterior - The outer of something usually what is visible.
Interior - The inside of something, usually what is not visible.
Mesh - A material mad up of crossed over fibres such as metal or thread.
Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,
Combination - The process of two of more things being mixed or combined together.

Supplier Information

Shop4world com
Page Updated: 2022-04-14 12:22:47

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu