This Powerful CPU cooler made by Alpenföhn is an asymmetric cooling tower with five nickel-plated 6 mm heat pipes Wing Boost 3 fan with PWM connector & a high compatibility for CPU sockets & RAMWhat&s the result of crossing & uniting two " Brocken" generations well it means the Brocken 3 will furthermore enhance the performance levels The CPU cooler features a large heat sink with aerodynamically optimised fins along with brushed as well as anodised top fins whose fin distance predestines the cooler for silent operation In combination with the five 6 mm heat pipes & the included 140 mm PWM fan from the Wing Boost 3 series gargantuan cooling power can be achieved The Rock Mount mounting system allows for an easy & uncomplicated installation of the cooler THE ALPENFOHN BROCKEN 3&S LIST OF FEATURES Tower cooler with up to 220W TDP cooling power Five 6 mm heat pipes & optimised fins Wing Boost 3 fan with PWM connector & 140 mm format Asymmetrical design of the tower for best RAM compatibility High-performance thermal paste " Permafrost" included High compatibility to AMD & Intel CPU sockets Rock Mount mounting system for easy installation CAPABLE ALPENFOHN BROCKEN CPU COOLER OF THE THIRD GENERATIONThe third generation of the famed & esteemed Brocken cooler made by Alpenföhn resembles its predecessors when it comes to looks alone but due to several innovations & an even further enhanced cooling performance the Brocken 3 can pull ahead of its rivals All the know-how & experience stemming from the very popular Brocken 1 & 2 models as well as volumes of customer feedback from the Alpenföhn online community have been incorporated into the construction of the Brocken 3 A striking difference to its direct predecessor becomes apparent in the fact that twin towers became one single tower again whose aerodynamically optimised fins with adjusted fin distance offer tremendously enhanced capabilities for silent operation Especially in combination with the new Wing Boost 3 140 mm fan that possesses a fixed integrated fan guide wheel for axially directed airflow noise levels could be reduced & a minimisation of airflow twist could be realised The result is a formidable performance increase of the fan that enabled a reduction of its maximum rotational speed in comparison to alternate layouts WING BOOST 3 FAN WITH PWM CONNECTORThe Wing Boost 3 fan intrigues primarily due to its special blade pitch intended for slow rotational speed which is why it delivers a significantly higher flow rate higher static pressure & a higher exit velocity in comparison to other fans at identical speed levels Apart from that the aerodynamically optimised blade geometry benefits the axially directed airflow & the fanning out of the exhaust air This way the heat sink can use a larger surface area for heat dissipation Naturally the 140 mm fan can be plugged directly into the motherboard via a PWM connector & rotates depending on the CPU temperature at between 400 & 1050 revolutions per minute Equipped with a durable fluid dynamic bearing the fan&s noise level doesn&t exceed quiet 19 d B even at full speed while being able to generate an airflow of up to 103 m&sup 3;h So a strong mountain breeze is definitely being provided here atop the Brocken! Also on board again is the gapless HDC technology (Heatpipe Direct Contact) featuring five nickel-plated 6 mm heat pipes neatly integrated directly into the copper base plate which warrants enhanced heat transmission Furthermore the Brocken 3 too employs an asymmetrical cooling tower design with long heat pipes that provide a lot of space between base plate & the heat sink the latter also being slightly shifted towards the back & not centred above the socket Thanks to this design not a single RAM slot is being obstructed by the cooler on most motherboards on the market not even when the fan is installed on the front side in a pushing configuration as it is most commonly done Nothing stands in your way when you plan on using all RAM slots on your board The latter can sport a PGA socket AM4 AM3 () AM2 () FM2 () & FM1 on AMD&s side or an LGA socket 775 1366 115x & 2011 (-V3) on Intel&s side of the market The Rock Mount mounting system facilitates the uncomplicated installation of the cooler once more TECHNICAL DETAILSGeneral Dimensions (without fan) 146 x 161 x 100 mm (W x H x D) Dimensions (with fan) 146 x 165 x 125 mm (W x H x D) Weight (with fan) 850 g Materials Copper (Base Plate) Nickel-plated Copper (Heat Pipes) Aluminium (Fins) Heat Pipes 5x & Oslash; 6 mm Fan 1x 140 mm (max 19 d B (A) 400
- 1050 RPM 103 m&sup 3;h) Connector 4 Pin PWMOperating Voltage 12 VCompatibility Intel Sockets LGA 775 1366 115x 2011 (V3)AMD Sockets AM4 AM3 () AM2 () FM2 () FM1
...

The Alpenf&246;hn Brocken 3 Alpenf&246;hn's next generation CPU cooler builds on the legacy of its predecessors with a striking design & outstanding cooling properties The Alpenf&246;hn Brocken 3 is essentially a large heatsink with two Wing Boost series fans attached either side It

Includes:: anodized fins as well as nickel-plated copper heat pipes which alongside the two 140mm PWM fans dissipate heat effectively from the CPU THE ALPENF&214;HN BROCKEN 3 WHITE EDITION CPU COOLER AT A GLANCEWhite Tower cooler form factor with up to 220W TDP cooling capacity Five 6mm heatpipes &38; optimized cooling fins 2x Black Wing Boost 3 fans with PWM connection in 140mm format Asymmetrical cooling tower design Compatible with AMD & Intel systems Rock Mount 2 mounting system for easy installation Alpenf&246;hn have used a asymmetric design for the Brocken 3 The cooling tower features five silver-plated heatpipes that run along the anodised fins meaning the radiator is slightly off centre from the baseplate This design ensures the heatsink dissipates heat & gives the Alpenf&246;hn Brocken 3 an impressive rugged look The two Boost series PWM 140mm fans attached to the heatsink have several notable features Their aerodynamic design improves overall airflow volume leading to a maximum airflow of 103 m 3 h at full speed & a low noise level of 19 d B The Alpenf&246;hn Brocken 3 can be mounted to both intel & AMD chips The installation process is straightforward attach the included backplate to your motherboard & secure the heatsink to the CPU with a light layer of thermal liquid The Alpenf&246;hn Brocken 3's tower form factor means that it can sit unobtrusively alongside system RAM SPECIFICATIONOverview Dimensions (without fan) 146 x 161 x 100 mm (W x H x D) Dimensions (with fans) 146 x 165 x 150 mm (W x H x D) Heatpipes 5x &216; 6 mm Weight (with fan) about 1000 g Material copper (bottom plate)nickel-plated copper (heatpipes)aluminum (fins) Colour White (radiator) White (fan) Heatpipes 5x &216; 6 mm

...

Even the best can always be better that&s what the engineers at Alpenföhn did by redesigning the Brocken ECO from the ground up The result more efficiency & even simpler installation This is how the Alpenföhn Brocken ECO Advanced achieves support for a TDP of 170 Watts & is perfect for overclockers The ultra-quiet 120mm Wing Boost 3 fan is the fan of choice Like its predecessor the Alpenföhn Brocken ECO Advanced also manages excellent price-to-performance THE FEATURES OF THE ALPENF& Ouml;HN BROCKEN ECO ADVANCED AT A GLANCEHigh-performance CPU cooler rated at with a 170W TDPFour 6mm heat pipes in nickel-plated copper Efficient Wing Boost 3 fan in 120mm format Improved RAM compatibility thanks to asymmetric design High compatibility with AMD & Intel Redesigned installation process for easy mounting COMPACT

Dimensions HIGH PERFORMANCEThe Alpenföhn Brocken ECO Advanced is more than an upgrade to the popular Brocken ECO which itself drew an extensive following on the basis of its excellent price-to-performance Due to the slightly larger cooler & a high-performance fan Alpenföhn has been able to increase the efficiency of the Brocken ECO Advanced to a TDP of 170 Watts Moreover the compact

Dimensions of the Brocken ECO Advanced do not just make it cheaper it makes it a great choice for many cases that lack room for a large tower cooler The 120mm- format fan also helps makes the ECO Advanced protrude a mere 149 cm into the case A total of four heat pipes make contact between the baseplate & the aluminium fins The heat pipes & the copper baseplate which is nickel-plated for aesthetic reasons Naturally this has had no effect on the cooling performance is unaffected as the excellent TDP demonstrates OPTIMAL FORMAT EFFICIENT FANThe 6mm heat pipes are embedded directly into the baseplate between the processor & cooler using Alpenföhn&s Gapless HDT technology The discerning out there will immediately notice that they&ve got a Brocken in front of them due to its dual-fin tower design & the arrangement of the fins that has changed to predominantly groups of three to result in a large heat dissipation area along with excellent airflow characteristics that allow the fan to operate at the lowest speeds possible The Alpenföhn Brocken ECO Advanced also features the ingenious innovation of being able to easily move the double tower in one direction With this asymmetrical design the four heatpipes rise so high that the heat sink is not exactly centred above the end plate but rather slightly offset to the rear This means that the majority of motherboards on the market won&t have a single RAM slot blocked by the cooler Alpenföhn

Includes:: an ultra-modern Wing Boost 3-series fan which thanks to the new angle of attack of the fan blades offers a significantly higher volume flow total pressure & exhaust speed all at the same time The static pressure is significantly increased by a fixed integrated guide wheel in the fan frame & this also contributes to a reduction in the turbulence in the air flowing away from it The result is a further optimisation of the radial flow & a reduction in noise There is also a PWM connection including a Y-splitter Up to three additional PWM fans can be connected to a single slot on the motherboard The Alpenföhn Brocken ECO is compatible with all current motherboard sockets from AMD (AM2AM2 AM3AM3 AM4 FM1FM2FM2 ) & Intel (775 1150115111551156 1366 2011 2011-V3 2066) & thanks to the " Rock Mount 2"-system is easy & straightforward to install Technical Details Dimensions (with fan) 126 x 149 x 93 mm (W x H x D) Weight (with fan) approx 660 g Material Copper (baseplate heatpipes) aluminium (fins) Heatpipes 4x & Oslash; 6 mm Fan 1x 120 mm Speed 500
- 1600 RPMAirflow max 509 CFMSound 135 to 248 d B (A) Connections 4-Pin PWM (with Y-splitter) Compatibility Intel Sockets 775 1150 1151 1155 1156 1366 2011 2011-V3 2066AMD Sockets AM2 AM2 AM3 AM3 AM4 FM1 FM2 FM2






...

With the Brocken ECO we proudly present the compact version of our bestseller Brocken 2 By reducing the overall

Dimensions

...

The Design of the heatsink maximises the amount of fins fitted in a relatively small area allowing for the heat dissipation of larger coolers on a much smaller footprint WB2-Technology Many users ask themselves…what are Wing Boost´s? Wing Boost´s are ridges on theimpeller that guide the air on the air-inlet side of the impeller Using the Wing Boost 2technology air turbulences are reduced wich leads to a lower noise level at full speed S-Shape geometry With the enhanced S-Shape geometry we could reach a higher static pressure comparedto conventional designs HD-bearing The new developed HD Bearing (Hydraulic Bearing) reduces friction noises to a minimum & thus enables to a quiet operation

Specification- Size 138x 123x 158mm- Weight 657gr- Size 120x 120x 25mm- Rated Voltage 12 VDC- Speed 500
- 1500 RPM- Airflow 106 m&sup 3;h- Bearing HD-Bearing- Auto Restart Yes


...

Alpenfohn may be a brand more associated with their high performance products but the Sella CPU cooler is Alpenfohn&8217;s attempt at making a much more budget friendly CPU cooler option The Alpenfohn Sella is a 9290mm fan based CPU cooler similar to products like the Silver Stone AR02 & the Cooler Master Hyper TX3 With three 6mm heat pipes a 900 to 2200 RPM 92mm fan & large heatsink improving cooling performance with budget in mind

Specification- Material Copper (heat pipes) aluminum (fins bottom)- Heatpipes 3x &216; 6 mm- Weight 422 g- Fan 92 mm (14 to 298 d B (A) 900-2200 628 m&179; h)- Connectors 4-pin PWM- Compatibility 1200 775 1155 1156 AM2 AM2 AM3 AM4- Cooling Capacity 130 Watts-

Dimensions 105 x 129 x 78 mm (Wx Hx D)



...

The new Alpenfohn Silvretta CPU Cooler giving unhindered cooling performance for Micro-ATX & Mini-ITX as these smaller cases are become more popular the demand for more efficent & performance coolers arises the Alpenfohn cooler does just that with a 92mm Tow-Blow cooler & three heatpipes
- This ensures your system will be keeping cool wheather a gaming computer or a theatre system Specifications-

Dimensions (with fan) 100 x 45 x 93 mm (W x H x D)- Material Aluminum (heat sink) Nickel Copper (base plate heat pipes- Weight (with fan) 250 g- Fan 92 mm (min 148 d B (A) 800-2800 U min max 8003 m&sup 3; h)- Voltage 12 V- Connector 4-pin PWM- Compatibility Intel Socket 775 1150 1155 1156 AMD Socket AM2 AM2 AM3 AM3 FM1 FM2


...

At a total height of only 45mm this low profile cooler is the best choice for any Intel AMD based HTPC as well as Small Form Factor systems
- Low Profile of only 45mm
- Compatibility with PCIe VGA cards on mini-ITX boards
- 3 Highend Heatpipes
- Super slim PWM fan
- Screw mounting for Intel AMD Low Profile of only 45mm Due to a low profile of only 45 mm this heatsink is perfect for use in compact HTPC as well as Small Form Factor cases Compatibility with PCIe VGA cards on mini-ITX boards On most mini-ITX boards the PCIe slot is very close to the Keep-free area of the processor While larger heatsinks interfere with this PCIe slot Silvretta provides full compatibility with the PCIe Slot Highend heatpipes 3 Highend heatpipes offer a large connection area to the soldered aluminum fins for a better heat conduction Super Slim PWM fan The assembled super slim fan supports the PWM function with a range between 800 & 2800 rpm Screw mounting for Intel AMD The screw mounting system for Intel AMD offers best compatibility to mini-ITX motherboards as well as safe installation of the heatsink Compatible with Intel max 95W Socket 115x (Skylake compatible) und 775 AMD max 95W Socket AM3 () AM3 AM2 () AM2 FM1FM2

Dimensions 100 x 93 x 45 mm Weight 250 g (incl fan) Fan

Dimensions 92 x 92 x 15 mm Rated Voltage 12 VDC Airflow 8003 m Speed 2800 rpm Auto Restart Yes Bearing Hydraulic-Bearing MTTF 120000 hours








...

German manufacturer Alpenföhn has a reputation for making outstanding cooling solutions The Wing Boost 3 RGB series is no exception Coming in either a single or three unit pack these 120mm PWM fans offer excellent cooling & their RGB lighting can sync with other components via Aura & Mystic light sync As a result Wing Boost 3 RGB&s will not only offer superior performance but perfectly compliment any systems aesthetics THE ALPENF& Ouml;HN WING BOOST 3 RGB AT A GLANCEVibration dampening rubber fittings for quiet operation Optimised blade design delivers perfect airflow Speed ranging from 400 to 1050 rpm 4-pin PWM connector & addressable THE ALPENF& Ouml;HN WING BOOST 3 RGB IN DETAILThe Wing Boost 3 RGB fans are fully addressable & compatible with standards such as Aura & Mystic light sync As a result fan lighting effects can be synchronised with other components via a compatible motherboard The three fan set also

Includes:: a remote control which lets users cycle through different lighting effects & modes without having to access software The Wing Boost 3 RGB offer PWM support as well as clever features such as the angle of the blades ensure that airflow is maintained even when the fans rotate slowly Alpenföhn have constructed the fans from premium components such as hydrodynamic plain bearings These reduce friction & ensure quiet operation irrespective of fan speed SPECIFICATIONDimensions 120 x 120 x 25 mm (W x H x D) Colour Black LED components Volume max 235 d B (A) Speed 700
- 1600 rpm Voltage 12 V Connection 4-pin PWM (with Y-switch) 3-pin ARGB


...

German manufacturer Alpenföhn has a reputation for making outstanding cooling solutions The Wing Boost 3 RGB series is no exception Coming in either a single or three unit pack these 120mm PWM fans offer excellent cooling & their RGB lighting can sync with other components via Aura & Mystic light sync As a result Wing Boost 3 RGB&s will not only offer superior performance but perfectly compliment any systems aesthetics THE ALPENF& Ouml;HN WING BOOST 3 RGB AT A GLANCEVibration dampening rubber fittings for quiet operation Optimised blade design delivers perfect airflow Speed ranging from 400 to 1050 rpm 4-pin PWM connector & addressable THE ALPENF& Ouml;HN WING BOOST 3 RGB IN DETAILThe Wing Boost 3 RGB fans are fully addressable & compatible with standards such as Aura & Mystic light sync As a result fan lighting effects can be synchronised with other components via a compatible motherboard The three fan set also

Includes:: a remote control which lets users cycle through different lighting effects & modes without having to access software The Wing Boost 3 RGB offer PWM support as well as clever features such as the angle of the blades ensure that airflow is maintained even when the fans rotate slowly Alpenföhn have constructed the fans from premium components such as hydrodynamic plain bearings These reduce friction & ensure quiet operation irrespective of fan speed SPECIFICATIONDimensions 120 x 120 x 25 mm (W x H x D) Colour Black LED components Volume max 235 d B (A) Speed 700
- 1600 rpm Voltage 12 V Connection 4-pin PWM (with Y-switch) 3-pin ARGB


...