. APC Switched Rack Power Distribution Units (PDUs) enable advanced user-customizable power control & active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment & restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring a temperature/humidity sensor port locking IEC receptacles & low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access configure & control Switched Rack PDUs through secure Web SNMP or Telnet Interfaces & is complimented by APC Centralized Management platforms using Infra Struxure Central Capacity Manager & Change Manager.
Includes: Installation guide Rack Mounting brackets Safety guide Serial configuration cable Input Nominal Input Voltage 200V208V230V Input Frequency 50/60 Hz Input Connections IEC 309 32A 2P+E Cord Length 3.05 meters Number of Power Cords 1 Acceptable Input Voltage 220-240 VAC Maximum Line Current per phase 32A Maximum Input Current per phase 32A Output Maximum Total Current Draw per Phase 32A Output Connections (21) IEC 320 C13 (3) IEC 320 C19 Overload Protection Yes Physical Net Weight 7.59kg Maximum Height 1829.00 mm Maximum Width 56.00 mm Maximum Depth 46.00 mm Shipping Weight 9.95kg Shipping Height 2040.00 mm Shipping Width 165.00 mm Shipping Depth 124.00 mm Colour Black..