The Kenilworth Domed Cycle Compound is an attractive curved cycle shelter popular with, offices, schools & colleges. This is a tough, robust structure with vandal resistant features. Suitable for 20 bikes with Sheffield Hoop Stands or more with a standard toast rack wheel stands. We recommend to leave a spacing of 800mm in between each st&. Kenilworth Domed Cycle Compound 4 metre width Dimensions 4000W x 2230H x 5500D mm Suitable for 20 bikes using Sheffield stands Fully galvanised steel structure Leg frames can either be bolted to the floor or grouted into the ground Designed for use with our Sheffield & Harrogate stands & racks All shelters do not include bike stands as standard ...

The Kenilworth 8m Domed Cycle Compound is an attractive curved cycle shelter popular with, offices, schools & colleges. This is a tough, robust structure with vandal resistant features. Suitable for 40 bikes with Sheffield Hoop Stands or more with a standard toast rack wheel stands. We recommend to leave a spacing of 800mm in between each st&. Kenilworth Domed Cycle Compound 8 metre width Dimensions 8000W x 2230H x 5500D mm Suitable for 40 bikes using Sheffield stands Fully galvanised steel structure Leg frames can either be bolted to the floor or grouted into the ground Designed for use with our Sheffield & Harrogate stands & racks All shelters do not include bike stands as standard ...

With the number of laptops used by both business & education increasing, this range of laptop storage products provides cost effective lockable storage for laptops & lap top accessories & provides charging facilities while the laptop is stored. Each compartment is equipped with a 3 pin plug socket & ventilation for dissipating the heat. This model has 12 compartments and 1 lockable door. High quality cost effective storage for laptops 12 compartment locker with 1 lockable doors Each compartment is equipped with a 3 pin plug socket for charging the laptop Ventilated compartments for allowing heat to escape Cam Key lock on each compartment two keys provided per lock Powder coated with germ guard Pre drilled for nesting Compartment aperture size 100mm (H)x 375mm (W)x 470mm (D) Available in a choice of three door colours please choose below ...

This large wall mounted smoking shelter is suitable for business locations where space is at a premium, to help them comply with legislation governing smoking at work. This shelter provides cover for up to 8 smokers. The robust construction of this smoking canopy is suitable for all-weather conditions, with a translucent polycarbonate roof providing up to 97% UV protection. Large Smoking Canopy for 8 persons Robust all-weather construction Greater than 50% open to allow rapid dispersal of cigarette fumes Fixes to a suitable wall on one side (fixings not included) while supporting legs bolt to the floor (parabolts included) N.B. Must be bolted to 250mm thick concrete for stability Site Survey & erection service available
- please phone for details Choice of frame colour
- please select below

...

ONLY FOR QMP LOCKERS Replacement keys for QMP Lockers. Your key number is usually embossed on the lock face. Replacement key for your QMPlockers Amend total quantity required List Key serial number (s) Also state quantity of each key if more than 1 ...

QMP Locker stand to support 5 x 300mm wide lockers with achoice of 2 depths of 300mm or 450mm. Locker stands lift thelockers off the ground allowing the floor to be cleaned withoutdamaging the locker. Locker Stand to hold 2 individual lockers 300 wide x 300 or 450mm deep Fully welded design offers strength & stability QMP Locker Stand coated in grey epoxy chip resistant paint tomatch lockers Locker Stands are available to match other lockersizes ...

QMP Locker stand to support 6 x 300mm or 4 x 450mm wide lockers with achoice of 2 depths of 300mm or 450mm. Locker stands lift thelockers off the ground allowing the floor to be cleaned withoutdamaging the locker. Locker Stand to hold 2 individual lockers 300 wide x 300 or 450mm deep Fully welded design offers strength & stability QMP Locker Stand coated in grey epoxy chip resistant paint tomatch lockers Locker Stands are available to match other lockersizes ...

QMP Locker stand to support 4 x 300mm wide lockers with achoice of 2 depths of 300mm or 450mm. Locker stands lift thelockers off the ground allowing the floor to be cleaned withoutdamaging the locker. Locker Stand to hold 4 individual lockers 300mm wide Choice of 2 depths
- 300mm or 450mm Fully welded design offers strength & stability QMP Locker Stand coated in grey epoxy chip resistant paint tomatch lockers Locker Stands are available to match other lockersizes
...

QMP Locker stand to support 5 x 300mm wide lockers with achoice of 2 depths of 300mm or 450mm. Locker stands lift thelockers off the ground allowing the floor to be cleaned withoutdamaging the locker. Locker Stand to hold 5 individual lockers 300mm wide Choice of 2 depths
- 300mm or 450mm Fully welded design offers strength & stability QMP Locker Stand coated in grey epoxy chip resistant paint tomatch lockers Locker Stands are available to match other lockersizes
...

QMP Locker stand to support 6 x 300mm or 4 x 450mm widelockers with a choice of 2 depths of 300mm or 450mm. Locker standslift the lockers off the ground allowing the floor to be cleanedwithout damaging the locker. Locker Stand to hold 6 individual lockers 300wide or 4 x 450mm wide Choice of 2 depths
- 300mm or 450mm Fully welded design offers strength & stability QMP Locker Stand coated in grey epoxy chip resistant paint tomatch lockers Locker Stands are available to match other lockersizes
...