TRAFFICline Impact Protection Wall Buffer Type ATough impact resistant polyurethane profiles Suitable for rooms & hallways in public buildings
- hospitals, nursing homes, waiting rooms & workshops East to clean, resistant against conventional detergents Pre drilled holes & fixings can be conealed with the supplied colour matched blanking plugs Dimensionally stable & frost proof to -30 degrees C2065mm length Choice of 3 colours white, black & light granite
...

Rectangular shaped  Surface Protection will prevent damage to property on impact. The black & yellow signal colours also draw attention to hazard to prevent injury. Comes with 3 pre-drilled holes for mounting onto sections. Surface  Protection
- Semi-Circular Suitable for use in factories, hospitals, laboratories & clinics on columns etc.UV resistant to prevent colour fade 1000mm in length but can be cut to size on site with a sharp knife or fine toothed saw. Temperature resistant from -40C to +90C3 Pre-drilled holes for screw/bolt fitting. Bolts not included.
...

Rectangular shaped Surface Protection will prevent damage to property on impact. The black & yellow signal colours also draw attention to hazard to prevent injury. Surface Protection
- Semi-Circular Suitable for use in factories, hospitals, laboratories & clinics on columns etc.UV resistant to prevent colour fade 1000mm in length but can be cut to size on site with a sharp knife or fine toothed saw. Temperature resistant from -40C to +90 C Self adhesive fitting is easy. Must be fixed to smooth, dust & grease-free areas.
...

Rectangular shaped  Surface Protection will prevent damage to property on impact. The black & yellow signal colours also draw attention to hazard to prevent injury. Comes with 4 pre-drilled holes for mounting onto sections. Surface  Protection
- Rectangle Suitable for use in factories, hospitals, laboratories & clinics on columns etc.UV resistant to prevent colour fade 500mm in length but can be cut to size on site with a sharp knife or fine toothed saw Temperature resistant from -40C to +90C4  Pre-drilled holes for screw/bolt fitting. Bolts not included.
...

TRAFFIC-LINE Semi-circular shaped Surface Protection will prevent damage to property on impact. The black & yellow signal colours also draw attention to hazard to prevent injury. Surface Protection
- Semi-Circular Suitable for use in factories, hospitals, laboratories & clinics on machinery, racking, conveyors, columns & girders etc.UV resistant to prevent colour fade 1000mm in length but can be cut to size on site with a sharp knife or fine toothed saw. Temperature resistant from -40C to +90 C Self adhesive fitting is easy. Must be fixed to smooth, dust & grease-free areas.
...

This Securikey quarter dome Anti-Ligature Stainless steel Convex Mirror has been designed & developed to meet the most stringent requirements. it has been approved & used by the Metropolitan Police, HM Prison Service & the UK Home Office. The quarter dome should be corner mounted in cells & at right angle corners to provide 90 degrees vision & prevent surprise attacks or collisions. It has a virtually indestructible & unbreakable stainless steel face. Securikey Quarter Face Stainless Steel Mirror Anti-Ligature design for use in secure institutions Quarter face dome manufactured from highly polished stainless steel Supplied with anti-ligature steel frame Ideal for corner mounting for situations that require wide area surveillance Virtually indestructible & unbreakable stainless steel face Prevents surprise attacks or collisions Bolts to wall & ceiling (fixings not supplied)

Dimensions
- 250 x 250mm Fixing tips: The fixing frame has 7mm countersunk holes, in addition to security screws to achieve an anti-ligature installation we recommend the use of a pick resistant sealant
- Arbokol 1025 or equivalent. The mirror should be fixed onto a bed of the sealent & the same sealant used to finish the installation by filling any gaps & covering the screwheads completely.



...

This Secuikey 180 degree half dome Anti-Ligature Stainless steel Convex Mirrors has been designed & developed to meet the stringent requirements. It has been approved & used by the Metropolitan Police. HM Prison Service & the UK Home Office. The half dome is ideal to be used in cells, day rooms, visitor areas or any other area that requires wide area surveillance. It is also perfect at T-Junctions eliminating blind spots around corners. Securikey Half Face Stainless Steel  anti-ligature surveillance mirror Anti-Ligature design for safety in secure institutions Half face dome manufactured from highly polished stainless steel Supplied with anti-ligature steel frame Ideal for corner mounting for situations that require wide area surveillance Virtually indestructible & unbreakable stainless steel face Prevents surprise attacks or collisions Ensures staff, patient & inmate safety Bolts to wall & celing (fixings not supplied)

Dimensions
- 500 x 250mm Fixing tips: The fixing frame has 7mm countersunk holes, in addition to security screws to achieve an anti-ligature installation we recommend the use of a pick resistant sealant
- Arbokol 1025 or equivalent. The mirror should be fixed onto a bed of the sealent & the same sealant used to finish the installation by filling any gaps & covering the screwheads completely.



...

The Collision Protection Bar will protect cabinets, shelves & wall mounted equipment from damage by vehicles in the factory or warehouse environment. The rounded, low profile bars are designed to stop vehicles whilst allowing easy pedestrian access to protected areas. The black & yellow signal colours ensure high visibility. Collision Protection Bar Height 86mm  x 1200mm Width Made with high-grade steel & 10mm guage base plates for extra strength With bevelled ends Fixed by surface mounting. Bolts not included. ...

The Collision Protection Bar will protect cabinets, shelves & wall mounted equipment from damage by vehicles in the factory or warehouse environment. The rounded, low profile bars are designed to stop vehicles whilst allowing easy pedestrian access to protected areas. The black & yellow signal colours ensure high visibility. Collision Protection Bar Height 86mm  x 400mm Width Made with high-grade steel & 10mm guage base plates for extra strength With bevelled ends Fixed by surface mounting. Bolts not included. ...

The Collision Protection Bar will protect cabinets, shelves & wall mounted equipment from damage by vehicles in the factory or warehouse environment. The rounded, low profile bars are designed to stop vehicles whilst allowing easy pedestrian access to protected areas. The black & yellow signal colours ensure high visibility. Collision Protection Bar Height 86mm  x 800mm Width Made with high-grade steel & 10mm guage base plates for extra strength With bevelled ends Fixed by surface mounting. Bolts not included. ...