More From Contributor

Commonly referred to as a “4th Hand”, the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs & brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten pull-up bolts & nuts. A must for any shop, home or professional. To use the BT-2, lever the lever in the open position & place cable in jaws. Squeeze handle to pinch cable. It is necessary to push moving arm of BT-2 against brake arm, derailleur body, or some other fixed object in order to pull & tension cable. Secure cable pinch bolt or nut to hold cable. ...

Available

The BTR-1 features the essential tools needed to fix a flat & make trail or roadside adjustments all wrapped in a well-organised, protective tool roll. Just the right size to slide into most medium to large sized saddle bags & wedge packs or a jersey pocket. ...

Available

The BTS-1 is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1

Includes:: English taps, 1.370 x 24 TPI right hand thread for the adjustable cup, & 1.370 x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part 693), for the adjustable & fixed cups are available as accessories.

...

Available

The BX-2 uses a super tough HDPE plastic shell that is nearly indestructible. This is a professional level lockable travel tool case customised to work specifically with bicycle tools. Each specially designed tool pallet is housed in a super tough, dent proof tool case designed & built for daily use. ...

Available

A comfortable backpack system for carrying the BX-2 Blue Box Tool Case. Padded shoulder, waist & chest straps. Handy accessory pouches. Fully adjustable. Specially designed to carry the Blue Box on your back. The BXB-2 is a well-built, secure & comfortable backpack system complete with padded shoulder straps, handy accessory pouches, plus waist & chest straps. The BXB-2 is fully adjustable & set up is quick & easy. NOTE: THe BXB-2 will fit both the BX-2 & BX-1 Blue Box Tool Cases. The harness also fits all versions of the EK-1 Professional Travel & Event Kit. ...

Available

Compact open ended wrenches in the most popular sizes for bike repairs, made from high strength steel with a nickel plate finish. The Park Tool Brake Wrenches are perfect for use on bike brakes & gears. ...

Available

Compact, open ended wrenches for the most popular bike sizes made from a professional quality high strength steel, the Park Tool Calliper Brake Wrench is ideal for fixing your bikes gears & brakes. ...

Available

A worn chain shifts poorly & wears sprockets at an accelerated rate. The CC-3.2 is a go-no go gauge designed to accurately indicate when a chain reaches. 5% &. 75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate & features permanent measurement markings. ...

Available

Park Tool CC2
- Chain Checker. The CC2
- Chain Checker is an accurate way to check for wear of roller & pin on chains & is designed

...

Available

The benchmark crank puller for over 25 years, the Park Tool CCP-22 Cotterless Crank Puller combines a comfortable long handle with an extra fine thread to provide enough leverage to remove even the tightest cranks. A unique floating tip design has been updated over the CCP-2 to ensure & even smoother operation & longer life. Designed to fit all cranks using 22mm threads & square, tapered bottom brackets. The Park Tool CCP-22 Cotterless Crank Puller is made in the USA & covered by a legendary limited lifetime warranty. ...

Available

Park Tool CBP-3 Campagnolo Bearing Puller And Installation Set

Designed and built to install and remove the pressed bearing used on Campagnolo and Fulcrum Ultra-Torque cranks. The bearing puller’s forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system “pulls” the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer.

Availability: In Stock
Supplier: Rutland Cycling
SKU: 135026

Description Reviews / Comments Add New

Product Description

Designed & built to install & remove the pressed bearing used on Campagnolo & Fulcrum Ultra-Torque cranks. The bearing puller’s forged arms & tapered edges securely pinch under the bearing while the heavy-duty plunger system “pulls” the bearing. The installation tool precisely fits both the crank spindle & the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool & a hammer.

Reviews/Comments

Add New

Jargon Buster

tap - A device used to control the release of gas or liquid.

Hammer - A tool used for providing impact to an object such as a nail

Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.

heavy - A concept of weight indicating an item may require some effort to lift or move

Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.

Install - A process of putting materials together to create a finished product.

Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

More From Contributor

Park Tool CBP-3 Campagnolo Bearing Puller And Installation Set

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account