easy Radio USB (Universal Serial Bus) Connect-2-Pi Dongles + e RA Modules
- LPRS ERA-CONNECT2-PIK1-433, easy Radio has been introduced to provide an innovative & effective solution for short range devices. easy Radio was the original 'smart' radio & is suitable for a wide range of applications acrross development, education & hobbyist, where there is a demand for robust & reliable communication. These systems comprise an easy Radio Connect-2-Pi USB (Universal Serial Bus) dongle & an e RA (easy Radio Advanced) transceiver module tp produce a system that provides a comprehensive wireless communication bridge between the Raspberry Pi system & a host computer. Connect-2-Pi USB (Universal Serial Bus) Dongles This Connect-2-Pi dongle is designed to provide a wireless link between a Raspberry Pi & a USB (Universal Serial Bus) enable computer (PC, laptop, etc.). The device utilises easy Radio technology that operates in the 434 M Hz ISM (Inustrial Scientific & Medical) b&. The dongle provides a considerably greater range, using less power than similar Wi Fi or Bluetooth devices operating in the overcrowded 2.4 G Hz bands. It is also possible to optionally configure parameters such as frequency, bandwidth, power output & data rate so that multiple devices may be used at the same time with no interference between them or other RF devices. e RA Transceiver Modules These transceiver modules carry on & exten the concept of simplicity in a short range device radio system by incorporating innovative features, including the ability to change bandwidth of the radio from 150k Hz down to 12.5k Hz thus enabling narrow-band performance with no additional cost. Additional new features include: a new digital RSSI, temporary channel/power level selection, free Flash firmware upgrades, back-compatibility with easy Radio 02 series modules, temperature compensation plus crystal controlled synthesiser for ±1k Hz frequency accuracy, temperature usable by host. Easyradio USB (Universal Serial Bus) Connect-2-Pi Dongle + Era Module 434 MHz