The choice of IRONMEN World champions. The CARBON SONIC has a choice of 3 different angles when attaching to the seat post. The cages* have a forward lowest drag position which sets the bottles close to the seat, or a position 1inch (25mm) further back for triathletes that like to sit off the back of the saddle when climbing. There also a variety of bottle cage angles. To add to the fun, you can even invert the carrier for a further 15 positions if you like. The Carbon Sonic comes complete with its own CO2 & INFLATER holder, known as the SONIC NUT. Located in the position XLAB has determined over a period of 16 years of testing in the Wind Tunnel & by Pros to be the fastest, you can rest assured you have the fastest 48oz Hydration & Storage system on the planet! & dont forget XLAB has been on the winning bike for 13 of the last 16 IRONMAN WORLD CHAMPIONSHIPS! Key

Features: Compatible with all seat post, including the long Fizik, ISM, SMP, Selle Italia, Selle San Marco, Terry & others. made from aircraft grade High Modulus Carbon Fibre weighing 49g (Manufacturers claimed), 28g lighter than the alloy version. All hardware included.
- XLab Sonic Nut. Anti drag decals.
- Detailed fitting instructions. For Cervelo P2C, P3C & P4C seatposts only. This product has a Lifetime Warranty to the original owner. * Does not include cages, Co 2 inflater, Co 2 cartridges, saddlebag or strobe light.



...

The choice of IRONMEN World champions. The CARBON SONIC has a choice of 3 different angles when attaching to the seat post. The cages* have a forward lowest drag position which sets the bottles close to the seat or a position 1inch (25mm) further back for triathletes that like to sit off the back of the saddle when climbing. There also a variety of bottle cage angles. To add to the fun you can even invert the carrier for a further 15 positions if you like. The Carbon Sonic comes complete with it's own CO2 & INFLATER holder known as the SONIC NUT. Located in the position XLAB has determined over a period of 16 years of testing in the Wind Tunnel & by Pros to be the fastest you can rest assured you have the fastest 48oz Hydration & Storage system on the planet! & don't forget XLAB has been on the winning bike for 13 of the last 16 IRONMAN WORLD CHAMPIONSHIPS! Key

Features: Compatible with all seat post including the long Fizik ISM SMP Selle Italia Selle San Marco Terry & others. made from aircraft grade High Modulus Carbon Fibre weighing 49g (Manufacturers claimed) 28g lighter than the alloy version. All hardware included.
- XLab Sonic Nut. Anti drag decals.
- Detailed fitting instructions. For Cervelo P2C P3C & P4C seatposts only. This product has a Lifetime Warranty to the original owner. * Does not include cages Co 2 inflater Co 2 cartridges saddlebag or strobe light.



...

The most versatile hydration & repair carrier system. Xlab wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, & other essential items. With the new Carbon Wing you can use a single bottle cage on the rear or one on each side. Key

Features: Xlab Carbon Wing is designed for 7mm metal saddle rails only. Cages & sonic-nut not included. Weighs only 55 grams without hardware (Manufacturer claimed). Upper & lower strap sets. Dual mounting holes for the saddle rail clamps. Detailed Instructions.

...

Boasting a lightweight carbon fiber composite, the Xlab Carbon Wing Bicycle Aero Mounting System will allow you to store your mobile phone, keys, cash, tyre levers & essential items, whilst the single bottle cage will allow you to stay hydrated when you're on-the-go. With no restrictive protrusion where the bottle enters the cage, it secures your bottle using 4 X-Grip teeth between the two mounting screws. With dual mounting holes for the saddle rail clamps, it means that you can have the cage vertical or slightly inclined. Tough & durable, it'll also reduce the rider's drag by filling in the turbulence hole behind the rider's posterior.
- L.M.

Features: Xlab Carbon Wing Bicycle Aero Mounting System Single bottle cage No restrictive protrusion where the bottle enters the cage Secures bottle using 4 X-Grip teeth Dual mounting holes for vertical & inclined positioning means that you can store your mobile phone, keys, cash & essential items Upper & lower strap sets Lightweight carbon fiber composite Reduces rider's drag Weight: 55g Please Note: This product is designed for 7mm metal saddle rails only.


...

Now in a gleaming white! Many have attempted to copy the original XLab design but none have succeeded. XLab have over a decade of experience designing carriers & winning with them. This rear carrier doesn't interfere with the air on the rider's back instead opting to fill the turbulence 'hole' behind the riders posterior reducing overall drag. The XLab Carbon Wing can store all manner of essential items using optional extras such as the XLab Mini Top Bag which is sold separately & can be secured by the top XStrap. CO2 cartridges & Nanoflator's can be stored using the optional hexagonal XNut. Even tyres & tubes can be neatly stored underneath the Carbon Wing inside optional XLab lower bags or even without the bag. Ultimately the XLab Carbon Wing is simply the most versatile professional level hydration storage inflation & repair carrier system on the market. Key

Features: XLab Carbon Wing is designed for 7mm metal saddle rails only. Can be used to mount a single bottle cage on the rear or one on each side simultaneously. Cages sold separately. Lightweight at only 55 grams without hardware. Upper & lower strap sets. Dual mounting holes for the saddle rail clamps. Detailed Instructions. XLab makes you faster just ask the Pros!

...

Quite often Triathlon framesets have smaller frame triangles & shorter head tubes in an effort to make the frames more aerodynamic. This results in having to pull the water bottle somewhat sideways in order to get it out of the bottle cage. Most current cages on the market make bottle extraction difficult. The engineers at XLAB™ have a cage that grips very well over bumpy surfaces but also has a special cut off angle of 30 degrees which testing has proved is the optimum angle in Tri framesets. It is super quick to get the bottle out of the cage. The cage features stiff bottom lip to support large bottles, stiff upper tab to retain bottles in the cage & slots in the back to provide vertical adjustment on the frame. Made with the same high temperature & pressure process as the successful Gorilla cage & in extra stiff carbon. The 6 arm design & graphics match the Gorilla cage so you can now have a consistent bottle cage design on your racing machine but with cages designed for each specific purpose. Use Gorilla Cage for rear hydration carriers. Material
- Carbon Fiber Weight
- 36g About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.

...

When the going gets rough don't loose your bottle. Specially designed by Xlab to withstand the rigours on rear hydration systems & on mountain bikes. Key

Features: Low cut sides for rapid bottle removal. Stiff top lip. Wide centre allows the sides to flex. Thick carbon shelf for bottles. Weight 38g (Manufacturer claimed). About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.

...

When the going gets rough don't loose your bottle. Specially designed by Xlab to withstand the rigours on rear hydration systems & on mountain bikes. Key

Features: Low cut sides for rapid bottle removal. Stiff top lip. Wide centre allows the sides to flex. Thick carbon shelf for bottles. Weight 38g (Manufacturer claimed). About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.

...

Quite often Triathlon framesets have smaller frame triangles & shorter head tubes in an effort to make the frames more aerodynamic. This results in having to pull the water bottle somewhat sideways in order to get it out of the bottle cage. Most current cages on the market make bottle extraction difficult. The engineers at XLAB™ have a cage that grips very well over bumpy surfaces but also has a special cut off angle of 30 degrees which testing has proved is the optimum angle in Tri framesets. It is super quick to get the bottle out of the cage. The cage features stiff bottom lip to support large bottles, stiff upper tab to retain bottles in the cage & slots in the back to provide vertical adjustment on the frame. Made with the same high temperature & pressure process as the successful Gorilla cage & in extra stiff carbon. The 6 arm design & graphics match the Gorilla cage so you can now have a consistent bottle cage design on your racing machine but with cages designed for each specific purpose. Use Gorilla Cage for rear hydration carriers. Material
- Carbon Fiber Weight
- 36g About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.

...

When the going gets rough dont loose your bottle. Specially designed by Xlab to withstand the rigours on rear hydration systems & on mountain bikes. Key

Features: Low cut sides for rapid bottle removal. Stiff top lip. Wide centre allows the sides to flex. Thick carbon shelf for bottles. Weight 38g (Manufacturer claimed).

...