More From Contributor

£23.79
More Aerodynamic Actually reduces drag caused by stem & headset spacers. Same width as head tube (Standard size bag), therefore no increase in frontal area. 72 degree front fits tight up against stem. Tapered aero design profile. Super smooth low skin friction exterior reduces drag. Non Sway Design non-slip surfaces underneath & on front of bag grip top tube & back of stem. Direct mount into integrated top tube bolt bosses with reliable non-seizing steel screws, & sturdy plastic insert. Easier to Use Located within easy reach while riding. non-slip rubber zipper pull. One handed Super-Slide zipper Smart Storage Mount behind sterm on integrated top tube bolt bosses Silver colored interior makes it easier to see contents. Can store the longest energy bars. Contents Stay Cooler Insulated sides keep your nutrition cooler. Silver interior helps reflect heat away Specifications: Dimensions: 8.4” (21.3cm) L x 2.5” (6.4cm) H x 1.5” (3.8cm) W

Material:
Proprietary low skin friction woven material. Red stretch interior mesh. Reflective silver lining. Proprietary insulation material. Anti-slip base. High stitch count embroidery.

Volume:
20.4 cu.in (334 c.cms). Weight: Bag: 21.3g, Insert: 15g, Hardware: 8.2g – Total 44.5g Warranty: Because of our engineering & testing for this product, we give it a 3 Year LIMITED Warranty to the original owner. About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.



...
Available
£27.99
Four easily accessible exterior pockets end the risk of dropping small vitals when they are needed most.

Features:


...
Available
£28.29
More Aerodynamic Actually reduces drag caused by stem & headset spacers. Same width as head tube (Standard size bag), therefore no increase in frontal area. 72 degree front fits tight up against stem. Tapered aero design profile. Super smooth low skin friction exterior reduces drag. Non Sway Design non-slip surfaces underneath & on front of bag grip top tube & back of stem. Direct mount into integrated top tube bolt bosses with reliable non-seizing steel screws, & sturdy plastic insert. Easier to Use Located within easy reach while riding. non-slip rubber zipper pull. One handed Super-Slide zipper Smart Storage Mount behind sterm on integrated top tube bolt bosses Silver colored interior makes it easier to see contents. Can store the longest energy bars. Contents Stay Cooler Insulated sides keep your nutrition cooler. Silver interior helps reflect heat away Specifications: Dimensions: 10” (25.4cm) L x 1.9” (4.83cm) H x 1.6” (4.1cm) W

Material:
Proprietary low skin friction woven material. Reflective silver lining. Proprietary insulation material. Anti-slip base. High stitch count embroidery.

Volume:
20 cu.in (328 c.cms). Weight: Bag: 40g, Insert: 15g, Hardware: 8g – Total 63g Warranty: Because of our engineering & testing for this product, we give it a 3 Year LIMITED Warranty to the original owner. About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.



...
Available
£32.49
Four easily accessible exterior pockets end the risk of dropping small vitals when they are needed most.

Features:


...
Available
£31.49
More Aerodynamic Actually reduces drag caused by stem & headset spacers. Airfoil shape provides clean air flow around bag. Same width as head tube therefore no increase in frontal area. Perfect 5:1 Ratio for lowest possible drag. Super smooth low skin friction exterior reduces drag. Non Sway Design non-slip surfaces underneath, grip top tube. Direct mount into integrated top tube bolt bosses with reliable non-seizing steel screws, & sturdy plastic insert. Easier to Use Located within easy reach while riding. non-slip dual rubber zipper pulls so you can open from either end. One handed Super-Slide zippers. Smart Storage Can carry 6 gels. Mount behind stem on integrated top tube bolt bosses Silver colored interior makes it easier to see contents. Can store the longest energy bars. Contents Stay Cooler Insulated sides keep your nutrition cooler. Silver interior helps reflect heat away Specifications: Dimensions: 10.5” (26.7cm) L x 2.1” (5.3cm) H x 1.5” (3.8cm) W

Material:
Proprietary low skin friction woven material. Reflective silver lining. Proprietary insulation material. Anti-slip base. High stitch count embroidery.

Volume:
23.2 cu.in (380cc). Weight: 2.7oz (76g)
- Including Hardware. Warranty: Because of our engineering & testing for this product, we give it a 3 Year LIMITED Warranty to the original owner. About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.




...
Available
£74.00
The most versatile hydration & repair carrier system. The original saddle mounted hydration & repair carrier. With over a decade of experience designing these carriers & winning more Ironman World Championships than any other competitors combined, Xlab have launched the first of the next generation of Xlab Hydration Carriers. Already endorsed by Michelie Jones, the 2007 Ford Ironman World Champion, this new wing will be on winning race rockets for the next several years. Rear carriers should not interfere with the air on the riders back, but instead fill in the turbulence hole behind the riders posterior, thereby reducing the riders drag (which accounts for 64% of energy used on a racing bicycle). Xlab wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, & other essential items. These & other items can be stored in the Xlab Mini Top Bag which drops vertically & easily into the rear luggage compartment & is secured by the top X-Strap. There are two choices for storing your CO2 cartridges & Nanoflator, or Xlab Speed Chuck on the rear of the Carbon Wing, using the optional hexagonal X-NUT or in the Xlab Mini Top Bag. Tires & tubes are always an issue, so now you can attach them neatly under the Carbon Wing inside a saddle bag attached to the mount underneath the carbon wing. With the new Carbon Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage, instead the bottles are held in place with 4 proprietary X-Grip teeth between the two mounting screws. Key

Features:
With the new Super Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage. Made from the latest aerospace aluminium alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. This mount has the ability to carry 2 cages (side mounted), a sonic-nut & a tyre/bag. Weighs only 85 grams without hardware (Manufacturers claimed). Upper & lower strap sets.
- Dual mounting holes for the saddle rail clamps. Detailed Instructions. Size approx 180mm x 50mm. Xlab makes you faster ask the Pros! One of the key features invented by Xlab is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical & others incline the cages for rider preference.
Includes:: Super Wing & mounting kit. Please note: Image for illustration purposes only, it does not include the bottle cages or bag which are available seperately.



...
Archived Product
£75.00
The most versatile hydration & repair carrier system. The original saddle mounted hydration & repair carrier. With over a decade of experience designing these carriers & winning more Ironman World Championships than any other competitors combined, Xlab have launched the first of the next generation of Xlab Hydration Carriers. Already endorsed by Michelie Jones, the 2007 Ford Ironman World Champion, this new wing will be on winning race rockets for the next several years. Rear carriers should not interfere with the air on the riders back, but instead fill in the turbulence hole behind the riders posterior, thereby reducing the riders drag (which accounts for 64% of energy used on a racing bicycle). Xlab wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, & other essential items. These & other items can be stored in the Xlab Mini Top Bag which drops vertically & easily into the rear luggage compartment & is secured by the top X-Strap. There are two choices for storing your CO2 cartridges & Nanoflator, or Xlab Speed Chuck on the rear of the Carbon Wing, using the optional hexagonal X-NUT or in the Xlab Mini Top Bag. Tires & tubes are always an issue, so now you can attach them neatly under the Carbon Wing inside a saddle bag attached to the mount underneath the carbon wing. With the new Carbon Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage, instead the bottles are held in place with 4 proprietary X-Grip teeth between the two mounting screws. Key

Features:
With the new Super Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage. Made from the latest aerospace aluminium alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. This mount has the ability to carry 2 cages (side mounted), a sonic-nut & a tyre/bag. Weighs only 85 grams without hardware (Manufacturers claimed). Upper & lower strap sets.
- Dual mounting holes for the saddle rail clamps. Detailed Instructions. Size approx 180mm x 50mm. Xlab makes you faster ask the Pros! One of the key features invented by Xlab is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical & others incline the cages for rider preference.
Includes:: Super Wing & mounting kit. Please note: Image for illustration purposes only, it does not include the bottle cages or bag which are available seperately.



...
Archived Product
£74.00
The most versatile hydration & repair carrier system. The original saddle mounted hydration & repair carrier. With over a decade of experience designing these carriers & winning more Ironman World Championships than any other competitors combined, Xlab have launched the first of the next generation of Xlab Hydration Carriers. Already endorsed by Michelie Jones, the 2007 Ford Ironman World Champion, this new wing will be on winning race rockets for the next several years. Rear carriers should not interfere with the air on the riders back, but instead fill in the turbulence hole behind the riders posterior, thereby reducing the riders drag (which accounts for 64% of energy used on a racing bicycle). Xlab wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, & other essential items. These & other items can be stored in the Xlab Mini Top Bag which drops vertically & easily into the rear luggage compartment & is secured by the top X-Strap. There are two choices for storing your CO2 cartridges & Nanoflator, or Xlab Speed Chuck on the rear of the Carbon Wing, using the optional hexagonal X-NUT or in the Xlab Mini Top Bag. Tires & tubes are always an issue, so now you can attach them neatly under the Carbon Wing inside a saddle bag attached to the mount underneath the carbon wing. With the new Carbon Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage, instead the bottles are held in place with 4 proprietary X-Grip teeth between the two mounting screws. Key

Features:
With the new Super Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage. Made from the latest aerospace aluminium alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. This mount has the ability to carry 2 cages (side mounted), a sonic-nut & a tyre/bag. Weighs only 85 grams without hardware (Manufacturers claimed). Upper & lower strap sets.
- Dual mounting holes for the saddle rail clamps. Detailed Instructions. Size approx 180mm x 50mm. Xlab makes you faster ask the Pros! One of the key features invented by Xlab is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical & others incline the cages for rider preference.
Includes:: Super Wing & mounting kit. Please note: Image for illustration purposes only, it does not include the bottle cages or bag which are available seperately.



...
Archived Product
£71.99
The most versatile hydration & repair carrier system. The original saddle mounted hydration & repair carrier. With over a decade of experience designing these carriers & winning more Ironman World Championships than any other competitors combined, Xlab have launched the first of the next generation of Xlab Hydration Carriers. Already endorsed by Michelie Jones, the 2007 Ford Ironman World Champion, this new wing will be on winning race rockets for the next several years. Rear carriers should not interfere with the air on the riders back, but instead fill in the turbulence hole behind the riders posterior, thereby reducing the riders drag (which accounts for 64% of energy used on a racing bicycle). Xlab wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, & other essential items. These & other items can be stored in the Xlab Mini Top Bag which drops vertically & easily into the rear luggage compartment & is secured by the top X-Strap. There are two choices for storing your CO2 cartridges & Nanoflator, or Xlab Speed Chuck on the rear of the Carbon Wing, using the optional hexagonal X-NUT or in the Xlab Mini Top Bag. Tires & tubes are always an issue, so now you can attach them neatly under the Carbon Wing inside a saddle bag attached to the mount underneath the carbon wing. With the new Carbon Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage, instead the bottles are held in place with 4 proprietary X-Grip teeth between the two mounting screws. Key

Features:
With the new Super Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage. Made from the latest aerospace aluminium alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. This mount has the ability to carry 2 cages (side mounted), a sonic-nut & a tyre/bag. Weighs only 85 grams without hardware (Manufacturers claimed). Upper & lower strap sets.
- Dual mounting holes for the saddle rail clamps. Detailed Instructions. Size approx 180mm x 50mm. Xlab makes you faster ask the Pros! One of the key features invented by Xlab is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical & others incline the cages for rider preference.
Includes:: Super Wing & mounting kit. Please note: Image for illustration purposes only, it does not include the bottle cages or bag which are available seperately.



...
Available
£62.99
The most versatile hydration & repair carrier system. The original saddle mounted hydration & repair carrier. With over a decade of experience designing these carriers & winning more Ironman World Championships than any other competitors combined Xlab have launched the first of the next generation of Xlab Hydration Carriers. Already endorsed by Michelie Jones the 2007 Ford Ironman World Champion this new wing will be on winning race rockets for the next several years. Rear carriers should not interfere with the air on the riders back but instead fill in the turbulence hole behind the riders posterior thereby reducing the riders drag (which accounts for 64% of energy used on a racing bicycle). Xlab wanted the next generation of carriers to solve the problem of storing keys cell phones cash tire levers & other essential items. These & other items can be stored in the Xlab Mini Top Bag which drops vertically & easily into the rear luggage compartment & is secured by the top X-Strap. There are two choices for storing your CO2 cartridges & Nanoflator or Xlab Speed Chuck on the rear of the Carbon Wing using the optional hexagonal X-NUT or in the Xlab Mini Top Bag. Tires & tubes are always an issue so now you can attach them neatly under the Carbon Wing inside a saddle bag attached to the mount underneath the carbon wing. With the new Carbon Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage instead the bottles are held in place with 4 proprietary X-Grip teeth between the two mounting screws. Key

Features:
With the new Super Wing you can use a single bottle cage on the rear or one on each side. These cages have no restrictive protrusion where the bottle enters the cage. Made from the latest aerospace aluminium alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. This mount has the ability to carry 2 cages (side mounted) a sonic-nut & a tyre/bag. Weighs only 85 grams without hardware (Manufacturers claimed). Upper & lower strap sets.
- Dual mounting holes for the saddle rail clamps. Detailed Instructions. Size approx 180mm x 50mm. Xlab makes you faster ask the Pros! One of the key features invented by Xlab is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical & others incline the cages for rider preference.
Includes:: Super Wing & mounting kit. Please note: Image for illustration purposes only it does not include the bottle cages or bag which are available seperately.



...
Available

XLab Stealth Pocket 500c

More Aerodynamic Actually reduces drag caused by stem and headset spacers. Airfoil shape provides clean air flow around bag. Same width as head tube therefore no increase in frontal area. Perfect 5:1 Ratio for lowest possible drag. Super smooth low skin friction exterior reduces drag. Non Sway Design Non slip surfaces underneath, grip top tube. Direct mount into integrated top tube bolt bosses with reliable non-seizing steel screws, and sturdy plastic insert. Easier to Use Located within easy reach while riding. Non slip dual rubber zipper pulls so you can open from either end. One handed Super-Slide zippers. Smart Storage Can carry 6 gels. Mount behind stem on integrated top tube bolt bosses Silver colored interior makes it easier to see contents. Can store the longest energy bars.
Contents Stay Cooler Insulated sides keep your nutrition cooler. Silver interior helps reflect heat away Specifications: Dimensions: 10.5” (26.7cm) L x 2.1” (5.3cm) H x 1.5” (3.8cm) W Material: Proprietary low skin friction woven material. Reflective silver lining. Proprietary insulation material. Anti-slip base. High stitch count embroidery. Volume: 23.2 cu.in (380cc). Weight: 2.7oz (76g) - Including Hardware. Warranty: Because of our engineering and testing for this product, we give it a 3 Year LIMITED Warranty to the original owner. About Xlab Xlab was formed due to a unique combination of recognizing new racing needs and an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america and wanting to follow his passion. he had
a passion for speed. Saving been a senior design specialist for numerous military and commercial aircraft, and even rockets and racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends and cycling 3, 300 miles across the us, he decided to sell the mail order business and concentrate his efforts full time on the aerodynamic design of bicycle gear.
Innovating and trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone and glacier national parks and the grueling icefield parkway.
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    • Availability: In Stock
    • Supplier: ProBikeKit
    • SKU: 11629878
    Availability: In Stock
    £34.99

    Product Description

    More Aerodynamic Actually reduces drag caused by stem & headset spacers. Airfoil shape provides clean air flow around bag. Same width as head tube therefore no increase in frontal area. Perfect 5:1 Ratio for lowest possible drag. Super smooth low skin friction exterior reduces drag. Non Sway Design non-slip surfaces underneath, grip top tube. Direct mount into integrated top tube bolt bosses with reliable non-seizing steel screws, & sturdy plastic insert. Easier to Use Located within easy reach while riding. non-slip dual rubber zipper pulls so you can open from either end. One handed Super-Slide zippers. Smart Storage Can carry 6 gels. Mount behind stem on integrated top tube bolt bosses Silver colored interior makes it easier to see contents. Can store the longest energy bars. Contents Stay Cooler Insulated sides keep your nutrition cooler. Silver interior helps reflect heat away Specifications: Dimensions: 10.5” (26.7cm) L x 2.1” (5.3cm) H x 1.5” (3.8cm) W

    Material:
    Proprietary low skin friction woven material. Reflective silver lining. Proprietary insulation material. Anti-slip base. High stitch count embroidery.

    Volume:
    23.2 cu.in (380cc). Weight: 2.7oz (76g)
    - Including Hardware. Warranty: Because of our engineering & testing for this product, we give it a 3 Year LIMITED Warranty to the original owner. About Xlab Xlab was formed due to a unique combination of recognizing new racing needs & an obsession for speed. aerospace designer craig turner entered the bicycle industry after quitting corporate america & wanting to follow his passion. he had a passion for speed. Saving been a senior design specialist for numerous military & commercial aircraft, & even rockets & racing yachts, he always wanted to make ‘vehicles’ go faster. being highly competitive, he did not want to get beaten on the hills by his training buddy, so he built super lightweight bikes under 13lbs in 1992. a feat not equaled in its day even by bike manufacturers. Still dissatisfied, he started the first mail order triathlon business in america. fifteen years later after selling over 10, 000 tri-bikes, designing bikes for large manufactures, setting numerous triathlon equipment trends & cycling 3, 300 miles across the us, he decided to sell the mail order business & concentrate his efforts full time on the aerodynamic design of bicycle gear. Innovating & trend setting have been roles in craig’s life. he also inspired candice to do a 500 mile bike ride at the age of 13 through the tough terrain of yellowstone & glacier national parks & the grueling icefield parkway.

    Reviews/Comments

    Add New

    Price History

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    Silver - A colour based on the colour of the metal
    Silver - A chemical element, metalic. Has the highest elctrical conductance of any element. Also known for its exceptional anitmicrobal properties
    Steel - An alloy made predominately of Iron combined with <2% carbon
    Plastic - A generic term for a synthetic product used in the manufacture of products
    Heat - A term used to define thermal energy
    Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
    rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
    rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
    embroidery - The art of decorating fabric with a needle and thread or yarn.
    Mail - Or post is a service for transmitting physical objects or letters between locations
    Screws - A simple device use for physically attaching two objects together
    weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
    speed - A measurement of how fast an object travels between two points
    Day - The time it takes a planet or other space objects to complete one rotation.
    Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
    Skin - The largest organ on a human. Its main purpose is to keep liquids inside the body.
    Large - something that takes up more space than normal.
    Embroidery - A thread based symbol.
    Equipment - A product or good that is tactile.
    Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
    Width - The measurement of something from one side to the other.
    Reliable - Something that is consistently good and can be trusted.
    Dimensions - The shapes and angles of something or a situation.
    Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
    Design - A drawing or styles that shows the look and functionality of something before its made.
    Exterior - The outer of something usually what is visible.
    Interior - The inside of something, usually what is not visible.
    Pocket - A bag shaped insert in clothing used to carry items
    Head - The upper part of a body typically separated by the neck.
    Sturdy - something hat is very stable and is solidly built.
    Combination - The process of two of more things being mixed or combined together.

    Supplier Information

    Page Updated: 2022-12-23 10:56:27

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu