The Aeria Ultimate stem has been designed to complement our Aeria Ultimate Bar & Carbon 1/ Twenty Road bar It offers hidden cable routing & the ability to hide a Di 2 junction box or EPS Interface (100 mm version) The low rise options allow a rider to get into a low, aerodynamic position – especially useful if you need to compensate for a modern, high stack frame

Features: made from forged 6061-T6-AL Stack: 12 mm Weight: from 380 g for 70 mm version

...

The focus of the Aeria Ultimate system was to achieve aerodynamics through fit. At over 40, 000 available positions we nearly doubled what our closest competitor is offering with the Aeria Ultimate

Features: Reach steps in 7.5mm increments with a range of -91 to -8.5 fore-aft A range of 82.5mm is more than double that of the first generation Aeria, while the 7.5mm steps halve the increment between positions We've lowered the stack of the bar by 7mm compared to the first generation Aeria, while adding the capability to tilt the extensions/pads by up to 15 degrees Combined with the Aeria Ultimate stem We've achieved the same low stack as systems that employ complicated under mount bracket assemblies The pad width options show another view of the extensive & detailed adjustment consistency Using F40 armrests allowed us to maximize stiffness in all set-up positions of our fit footprint The bolt pattern allows the armrest bolts to be mounted in tandem or side-by-side allowing maximum adjustability plus retro-fits between other Profile Design brackets Aeria Ultimate uses T4 carbon extensions The high-performance shallow ski-bend extension is crafted from pre-preg carbon fibre & offers a single neutral wrist angle with a low extension height for better aerodynamics The Aeria Ultimate bracket delivers multiple performance benefits with a simple & secure in-line extension clamp, 0-15┬â-‘ tilt adjustment with stackable risers & a stable armrest platform The bracket platform & bolt positions maintain our previously established bolt spacing & allow retro-fits for any existing Profile Design armrest, or upgrade to previous Aeria systems Risers mate to the bracket & wing & are stackable in 5mm increments The recessed groove on the trailing edge allows for clean electronic cable routing & the ability for stack changes without needing to remove or re-cable electronic shifting The stabilizing bridge also is compatible with our J5 BTA bottle mount
- making for a simple & adaptable hydration placement The wing bar is designed for both mechanical & electronic internal cable routing; the engineered cable window in the centre clamp allows for clean & simple cable routing into the frame without any aerodynamic penalties System weight with Aeria Ultimate stem is approx. 885g


...

The focus of the Aeria Ultimate system was to achieve aerodynamics through fit. At over 40, 000 available positions we nearly doubled what our closest competitor is offering with the Aeria Ultimate

Features: Reach steps in 7.5mm increments with a range of -91 to -8.5 fore-aft A range of 82.5mm is more than double that of the first generation Aeria, while the 7.5mm steps halve the increment between positions We've lowered the stack of the bar by 7mm compared to the first generation Aeria, while adding the capability to tilt the extensions/pads by up to 15 degrees Combined with the Aeria Ultimate stem We've achieved the same low stack as systems that employ complicated under mount bracket assemblies The pad width options show another view of the extensive & detailed adjustment consistency Using F40 armrests allowed us to maximize stiffness in all set-up positions of our fit footprint The bolt pattern allows the armrest bolts to be mounted in tandem or side-by-side allowing maximum adjustability plus retro-fits between other Profile Design brackets Aeria Ultimate uses T4 carbon extensions The high-performance shallow ski-bend extension is crafted from pre-preg carbon fibre & offers a single neutral wrist angle with a low extension height for better aerodynamics The Aeria Ultimate bracket delivers multiple performance benefits with a simple & secure in-line extension clamp, 0-15┬â-‘ tilt adjustment with stackable risers & a stable armrest platform The bracket platform & bolt positions maintain our previously established bolt spacing & allow retro-fits for any existing Profile Design armrest, or upgrade to previous Aeria systems Risers mate to the bracket & wing & are stackable in 5mm increments The recessed groove on the trailing edge allows for clean electronic cable routing & the ability for stack changes without needing to remove or re-cable electronic shifting The stabilizing bridge also is compatible with our J5 BTA bottle mount
- making for a simple & adaptable hydration placement The wing bar is designed for both mechanical & electronic internal cable routing; the engineered cable window in the centre clamp allows for clean & simple cable routing into the frame without any aerodynamic penalties System weight with Aeria Ultimate stem is approx. 885g


...

When you're racing longer distances & have a need for solid fuel on the go, a top tube carrier is the most efficient solution. This version of aero e-pack features a mount system on compatible frames with top tube direct bolts, or via the more conventional hook & loop & elastic lace lock combination. This pack can fit virtually any frame & comes with aerodynamic benefits as it fits behind the stem out of the direct wind. The slice shape tapers to nothing where it blends to the top tube & keeps out the way of brushing knees.

Features: made from durable nylon

...

When you're racing longer distances & have a need for solid fuel on the go, a top tube carrier is the most efficient solution. This version of aero e-pack features a mount system on compatible frames with top tube direct bolts, or via the more conventional hook & loop & elastic lace lock combination. This pack can fit virtually any frame & comes with aerodynamic benefits as it fits behind the stem out of the direct wind. The slice shape tapers to nothing where it blends to the top tube & keeps out the way of brushing knees.

Features: made from durable nylon

...

The Profile Design Aero HC Bracket / Computer Mount can to be used with any standardised bottle & cage system.p>

Features:

...

This aerodynamic front mount bottle system conveniently positions essential hydration between the riders arms for a sleek aerodynamic profile.

Features: Easy to operate flip cap means simple, no splash, refills Aerodynamic straw mount Removable nose section improves aerodynamics & makes cleaning the bottle easy Integrated bracket attaches to the aerobar extensions & offers width adjustment as well as length adjustment to suit many bar setups Cage is length adjustable on the bracket Computer mount integrates with the bracket & hides the computer behind the bottle reducing frontal area Construction: BPA-free, foodsafe HDPE bottle, injected nylon / GF bracket & computer mount Capacity: 828 ml System comprises Bottle, Bracket & Computer Mount

...

World class athletes including the reigning Ironman world champion use Profile Design, they tell them what they need to win. Then, the Profile Design R & D team rides the technologys edge, bringing the latest innovation to every single product. Genuine Profile Design replacement parts. Key

Features: Replacement Velcro strap for the Aerodrink bracket. Sold individually.

...

World class athletes including the reigning Ironman world champion use Profile Design they tell them what they need to win. Then the Profile Design R & D team rides the technologys edge bringing the latest innovation to every single product. Genuine Profile Design replacement parts. Key

Features: Replacement Velcro strap for the Aerodrink bracket. Sold individually.

...

World class athletes including the reigning Ironman world champion use Profile Design, they tell them what they need to win. Then, the Profile Design R & D team rides the technologys edge, bringing the latest innovation to every single product. A drinking system that means that you can stay in tucked position & drink at same time. Key

Features: Hands free drinking via an extended straw. The bottle is aerodynamically shaped & made from USDA approved injection moulded plastic. Easy re fill no splash cap. Designed to fit securely in the gap of the Air Stryke & Legacy aerobars. Works with any Aerobar system when using an Aero drink bracket. Capacity: 32oz/950ml. Weight: 171g (manufactures claimed).

...