High-performance MOON LED front light, NEW MODEL. Easy & convenient attachment to the handlebar. CNC machined aluminum frame. Model: MOON Rigel
- Powerful 2-LED front light Various light modes / variations
- Mode 1: 700 lm, operating time 1h 30 min
- Mode 2: 350 lm, operating time 3 hours Flashing function
- Flash 1: 100 lm, operating time 37h 30min
- Flash 2: 400 lm, operating time 23 hours
- Daytime running light: 400 lm, operating time 56 hours
- SOS function, operating time 32h 30min
- The new luminaire is packed in a locked state to prevent it from being switched on accidentally: To unlock, press switch n 6sec, giving the blue light on the switch flashes 2 times = the lock is unlocked & you can use all light modes. If you want to lock valaismen again, then turn off the lights, push the switch's 6sec, when the switch blue light will flash 2 times = lock is activated, you can
- Reversible lens enables the lamp be attached upside down
- Overheating protection
- light indicator for charging & battery duration
- Automatic shut-off when the battery is fully loaded
- Also visible on the site!
- Easy-to-use rod mount with quick release
- Rechargeable, USB (Universal Serial Bus) cable included
- Moisture protection IPX7
- Charging time: approx. 2 hours
- Battery: 3.7V 1600m Ah, Li-ion polymer
- Dimensions: 30 x 88 x 29.5 mm (Wx Dx H)
- Weight 86g



















...

The innovative Ring features a circular COB LED, which generates 60 lumens of light output.1 pce 15 chips circualr ring COB high brightness LEDCNC aluminium heat sink Rechargeable lithium polymer battery 3.7v / 280 m Ah USB rechargeable 6 modes Quick release patented universal bracket fits all round bars & Aero bars 2 x Orings 20-35mm, 35-52mm Low battery, cahrging & fully charged indicator Automatoc chrged cut off system Side visibility IPX4 Belt clip bracket, ideal for clothing & bags 270 degrees total light angle 21g 44mm x 31.2mm x 16.5mm Runtimes: Overdrive 60 lumens
- 1 hour 50 mins High 35 lumens
- 3 hours 30 mins Standard 10 lumens
- 60 hours 40 mins 100% flashing 60 lumens
- 3 hours 25 mins 20% flashing 10 lumens
- 13 hours 30 mins Strobe 30 lumens
- 8 hours 10 mins Spares:LAA595
- Bracket LAA596
- Helmet bracket LAA517
- USB (Universal Serial Bus) cable LAA534
- Mains charger LAA215
- O rings LAA553
- Belt clip











...

Features: 1 pc (15 chips) Round ring COB high brightness red LED CNC Aluminium heat sink casing Mode memory function,
...

The Moon Shield Rear Light provides up to 60 lumens of light output. The high output rear light is fully rechargeable via USB (Universal Serial Bus) connection to either Mac or PC. Key

Features: Up to 60 lumens light output 1 x CREE XPE LED Tool free quick release bracket Constant & flashing modes Water resistant Vertically adjustable Low battery indicator 3.7V Lithium polymer battery USB (Universal Serial Bus) rechargeable Up to 6 hours runtime 2 hours charge time

...

Features: 1 pc CREE XP-E + 1 pc (20 chips) COB high brightness red LED CNC Aluminium heat sink casing Light sensitive
...

The Moon SH06L front light features 90 lumen output. Its Luxeon Rebel LED offers up to 6 hours full beam & 20 hours flashing mode. Key

Features: Luxeon Rebel LED 90 Lumen output Full beam 6 hours Flashing 20 hours Optical reflector Side visibility Constant & flashing modes QR bracket Water resistant Low battery indicator

...

BOOST
- 1300lm
- 1.5hr MODE 1
- 1000lm
- 2.10hr MODE 2
- 100lm
- 24hr FLASH 1
- 100lm
- 100hr STEADY FL
-








...

The Moon X Power 1300 features a range of technology to make the light as efficient as possible. Housed in a CNC aluminium body the X-Power 1300 features 7 modes: overdrive high standard low flashing strobe & SOS (only to be used in an emergency this setting can be seen for miles & used to attract attention). USB (Universal Serial Bus) power output function means that you can charge your phone or camera from the battery pack. The battery can operate as a rear light with 6 Lumens output & be mounted to your seat post handlebars or helmet. The light's effective cooling system can increase run time & efficiency. Cooling is achieved through the dual air vents & specific bracket design dissipate heat through the light & a rear zinc alloy heat sink that increases cooling & heat management. Key

Features: 2 x XML LEDs CNC aluminium body 7 modes – Over drive / High / Standard / Low / flashing / Strobe / SOS The SOS mode should only be used in an emergency the SOS mode can be seen for miles Handlebar & helmet brackets Sophisticated over heating protection system Precision optical lens Rechargeable lithium ion battery 7.4v 3300m Ah Charging indicator Auto charge cut off Battery can operate as a rear light with 6 Lumens output Battery can be mounted to seat post handlebars or helmet.

Includes:: extension cable USB (Universal Serial Bus) power output function
- charge your phone or camera from the battery pack Horizontal & vertical beam adjustment Effective cooling system can increase run time & efficiency Dual air vents & specific bracket design dissipate heat through the light Rear zinc alloy heat sink increases cooling & heat management XPS2 battery comes as standard with XP1300 Can be used as rear safety light Low battery & charge indicator Can charge USB (Universal Serial Bus) products like phones & cameras Can be mounted to handlebar top tube seat post helmet 8.4V DC / 1.5A 7.4V / 2500 mah




...

The X-Power 1800 provides 1800 lumens of light output, with a rechargeable 5200m Ah lithium polymer battery. This high power unit is ideal for off road night riding.4 Cree XM-L (U2) LEDSCNC aluminium alloy body 7 modes: Over drive
- 1800 lumens, 1 hour 40 mins run time High
- 1200 lumens, 2 hours 30 mins runtime Standard
- 850 lumens, 3 hours 40 mins runtime Low
- 400 lumens, 8 hours runtime Flashing
- 6 hours 30 mins runtime Strobe
- 6 hours 30 mins runtime SOS
- 6 hours 30 mins runtime Quick release handlebar bracket Quick release helmet mount Mode indicator The headlight features a low battery indicator The battery features an incremental power gauge for accurate power readings Precision optical lens The set

Includes:: a remote switch, this means that you can scroll through the lighting modes via the button on the handlebar, this means there is now no need to take your hands off the bar during riding.
Includes: battery extension cable which allows the battery to be mounted on the bike, helmet or carried in the backpack. Smart charger Magic tape band mounting straps for the battery The LEDs are mounted on copper plated LED boards to increase the heat transfer rate & enhance the lights performance Rechargeable lithium ion battery (7.4V / 5200m Ah) Charging & fully charged indicator Auto turn on or off indicator The battery can be used as a rear light with static & flashing modes The battery has a USB (Universal Serial Bus) power out port, so you can charge or power other items from it via USB (Universal Serial Bus) connection. Light body 136g Battery case 290g Charge time
- 5 hours Heat sink cooling system: The high brightness LEDs will heat up the light body while working. An efficient cooling system increases runtime & the brightness of the LED from 15%-30%. To reduce the heat generated by the LEDs the X-power 2500 & 1800 are designed with aluminium alloy bodies & equiped with an air venting cooling system. Over heating protection system: When the bicycle light is running without adequate airflow, the protction device will automatically start to dim the light to standard brightness mode, it will reduce the heat of the light & ensure the LEDs will not be damaged due to over heating.










...

Features: 4 CREE XM-L (U2) high brightness LEDs CNC aluminum alloy body 4 steady modes, 2 flashing modes, SOS Quick
...