Introducing the yellow jersey of high-powered bike lights: Knog Blinder Road 3. Loaded with a mammoth 300 lumens of light all from a lightweight 105g 100% waterproof USB (Universal Serial Bus) rechargeable integrated silicone package. This weapon of a light would look right at home strapped to the Maserati of rides. Its anodised aluminium face not only looks slick it feels good to touch. It also comes with two detachable silicone straps & a stainless steel clasp which allow for tool-less mounting of the light to your bike. These are a must-have accessory for bars measuring 22-28mm or 29-35mm. Packing two of the latest high-intensity XB Cree LEDs from a 22° wide-angle beam 15° narrow beam & dual 22°/15° beam; don’t be surprised if the peloton begs you to ride ahead of them. A serious light that gives riders 100% vision at night whilst being visible to others at over 1000m it’s also been engineered with a thermal management system that regulates the light output for optimum performance when the bike is stationary & in motion. The Blinder Road 3 boasts two flash patterns & a burn time of up to 1 hour on the brightest mode & 10 hours in alternating flash mode. Whether you’re training at the crack of dawn or ripping through thick fog in the Alps this light will not disappoint. Its integrated USB (Universal Serial Bus) recharging system is hooked into a lithium polymer battery with a charge time of 6 hours. Its battery-warning indicator will turn red when the battery is low & during charge & green when it’s fully charged. Additional functionality also allows riders to personalise their favourite light setting plus a tactile button that provides longer feedback to prevent the light from turning on accidentally in your bag or pocket while you’re on the move. Key

Features: LEDs: 2 x CREE XB-D LEDs Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visibility: Visible from a distance of min. 1000 metres Beam Angle (degrees): Wide beam 22°- Hi/ Low. Narrow beam 15°
- Hi/ Low Dual beam 15 & 22°combined
- Hi/ Low. Li Po Technology: Battery protection circuit. USB (Universal Serial Bus) Rechargeable & an extension cord is included. This maintains consistent brightness throughout specified run-time. 100% Waterproof & Dust Proof
- Designed to be exposed to the elements the plug is waterproof & will not be damaged by exposure. Light Modes: Total of 11 light modes: 1. Narrow Low Beam 2. Narrow Medium Beam 3. Narrow High Beam 4. Wide Low Beam 5. Wide Medium Beam 6. Wide High Beam 7. Dual Low Beam 8. Dual Medium Beam 9. Dual High Beam 10. Alternating LEDs Flashing 11. 1 LED Steady /1 LED flashing. Burn time: Steady mode: Low-beam 7hr High-beam 1hr. Flash mode: Alternating Flash 10hrs Steady Flash 7.5hrs 5 hour charge time New longer button push on (0.75sec) prevents accidental activation. Low battery indicator Thermal management: Automatically regulates the light output for optimum performance when the bike is stationary & in motion Two removable silicone straps for bars 22-28mm / 29-35mm Helmet mount included Testing: The Blinder Road has been tested against the following; Drop tests corrosion tests UV tests Electrical shock & static vibration & impact temperature & humidity cycle testing & CE certification. Technical Specifications: Road: Yes Weight (g): 75 Battery Type: Li-Ion Battery Included: Yes Battery Level Light: Yes Battery Position: Internal Bulb Type: LED Power Plug Type: USB (Universal Serial Bus) Output (Lumens): 200




...

Introducing the yellow jersey of high-powered bike lights: Knog Blinder Road 3. Loaded with a mammoth 300 lumens of light all from a lightweight 105g 100% waterproof USB (Universal Serial Bus) rechargeable integrated silicone package. This weapon of a light would look right at home strapped to the Maserati of rides. Its anodised aluminium face not only looks slick it feels good to touch. It also comes with two detachable silicone straps & a stainless steel clasp which allow for tool-less mounting of the light to your bike. These are a must-have accessory for bars measuring 22-28mm or 29-35mm. Packing two of the latest high-intensity XB Cree LEDs from a 22° wide-angle beam 15° narrow beam & dual 22°/15° beam; don’t be surprised if the peloton begs you to ride ahead of them. A serious light that gives riders 100% vision at night whilst being visible to others at over 1000m it’s also been engineered with a thermal management system that regulates the light output for optimum performance when the bike is stationary & in motion. The Blinder Road 3 boasts two flash patterns & a burn time of up to 1 hour on the brightest mode & 10 hours in alternating flash mode. Whether you’re training at the crack of dawn or ripping through thick fog in the Alps this light will not disappoint. Its integrated USB (Universal Serial Bus) recharging system is hooked into a lithium polymer battery with a charge time of 6 hours. Its battery-warning indicator will turn red when the battery is low & during charge & green when it’s fully charged. Additional functionality also allows riders to personalise their favourite light setting plus a tactile button that provides longer feedback to prevent the light from turning on accidentally in your bag or pocket while you’re on the move. Key

Features: LEDs: 2 x CREE XB-D LEDs Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visibility: Visible from a distance of min. 1000 metres Beam Angle (degrees): Wide beam 22°- Hi/ Low. Narrow beam 15°
- Hi/ Low Dual beam 15 & 22°combined
- Hi/ Low. Li Po Technology: Battery protection circuit. USB (Universal Serial Bus) Rechargeable & an extension cord is included. This maintains consistent brightness throughout specified run-time. 100% Waterproof & Dust Proof
- Designed to be exposed to the elements the plug is waterproof & will not be damaged by exposure. Light Modes: Total of 11 light modes: 1. Narrow Low Beam 2. Narrow Medium Beam 3. Narrow High Beam 4. Wide Low Beam 5. Wide Medium Beam 6. Wide High Beam 7. Dual Low Beam 8. Dual Medium Beam 9. Dual High Beam 10. Alternating LEDs Flashing 11. 1 LED Steady /1 LED flashing. Burn time: Steady mode: Low-beam 7hr High-beam 1hr. Flash mode: Alternating Flash 10hrs Steady Flash 7.5hrs 5 hour charge time New longer button push on (0.75sec) prevents accidental activation. Low battery indicator Thermal management: Automatically regulates the light output for optimum performance when the bike is stationary & in motion Two removable silicone straps for bars 22-28mm / 29-35mm Helmet mount included Testing: The Blinder Road has been tested against the following; Drop tests corrosion tests UV tests Electrical shock & static vibration & impact temperature & humidity cycle testing & CE certification. Technical Specifications: Road: Yes Weight (g): 75 Battery Type: Li-Ion Battery Included: Yes Battery Level Light: Yes Battery Position: Internal Bulb Type: LED Power Plug Type: USB (Universal Serial Bus) Output (Lumens): 200




...

The Knog Blinder 4V has four super bright LEDs that pump out up to 44-Lumens of light. Its optimised optics focus directs a smooth beam pattern that makes the Blinder visible over 800 metres. With 5 different modes (steady fast flash organic flash slow organic flash fast eco flash) & a burn time of up to 3-hours in constant beam & up to 50-hours in eco-flash mode this light is designed to keep you well seen. Key

Features: LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride. Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visibility: Light is visible at over 800 metres Light Modes: 5 light modes: 1. steady 2. fast flash 3. organic flash slow 4. organic flash fast 5. eco-flash. Burn Time: Blinder 4V lasts upto 3 hours in steady mode 4
- 5 hours in modes 2 & 3 15 hours in mode 4 & up to 50 hours in mode 5 Battery: Rechargeable Lithium polymer battery via integrated USB (Universal Serial Bus) plug. Integrated USB (Universal Serial Bus) Plug: Designed to be exposed to the elements the plug is also waterproof & will not be damaged by exposure. Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly the light is switched off with a long button push off (0.5sec). Storage Mode: Storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isnt being used. 1. Charge the light for a full charge cycle (indicator glows green when charged). 2. Remove light from USB (Universal Serial Bus) charging device / port. 3. Turn light on in any mode. 4. Hold button down for more than 5 seconds at which point the indicator LED will turn red. 5. The light itself will remain on until the Blinder switches itself off & into storage mode. Bike Attachment: Tool-less attachment for handlebars/rear-posts & frames of 22-32mm. Not suitable for aero post design. 100% Waterproof: The Blinder 4V is IP66 Tested & 100% waterproof against all elements. Testing: The Blinder 4V has been tested against the following; drop tests corrosion tests UV tests electrical shock & static vibration & impact temperature & humidity cycle testing & CE certification. Technical Specifications: Dimensions: 26 x 76 x 62mm Weight: 43g

Materials: UV-Resistant Industrial grade silicone polycarbonate housing polycarbonate lens hard-anodised aluminium fascia & solid stainless steel MIM latch USB: Rechargeable Lithium Polymer battery Rear: 44 lumens (LED Rating)




...

Light weight, compact, & USB (Universal Serial Bus) rechargeable—the new Blinder Road 400 & Blinder Mini Square Light set has it all – including an additional Blinder Mount. The Blinder Road 400 light features dual beam optics that are designed to project more light onto the road ahead, all while doing so in a lightweight, compact size. The Blinder Mini Square features efficient COB LEDs, an integrated USB (Universal Serial Bus) arm for charging, & interchangeable silicon straps designed to accommodate all frame & tube sizes. Also included, is the Blinder Mount, designed to discretely tuck the Blinder unit directly under a cycling computer using the Go Pro style attachment. Packaged together, this light set is perfect for the road cyclist looking to light the way, in the lightest way possible. ...

The Blinder ROAD 400 is the performance light for the ultimate road cyclist. Packing 400 lumens of light & using two of the latest high-intensity LUMILEDS LEDS ensures roads & paths are flooded with light, no matter where you ride. With incredible power / weight ratio & dual + constant flash modes, you won't find another light like this. Specifications: Dimensions: 53x 30x 75mm Weight: 105g

Materials: UV-resistant industrial grade silicone rubber body & strap. Polycarbonate housing. PMMA Lens. Anodised aluminium heat sink. Anodised aluminium fascia & solid stainless steel MIM latch. LEDs: 2 x Lumileds Luxeon Z ES Battery: Integrated rechargeable Lithium Polymer. Peak brightness: 400 Lumens 11 Light modes: 1. Narrow Low Beam, 2. Narrow Medium Beam, 3. Narrow High Beam, 4. Wide Low Beam, 5. Wide Medium Beam, 6. Wide High Beam, 7. Dual Low Beam, 8. Dual Medium Beam, 9. Dual High Beam, 10. Alternating LEDs Flashing, 11. 1 LED Steady/1 LED flashing Run-time (steady): Low
- 7hr, High
- 2hrs. Run-time (flash): Alternating Flash
- 9hrs, Steady Flash
- 4.5hrs Waterproof: 100% Waterproof & Dustproof to IP67. Beam angles (degrees): Narrow
- 15°, Wide
- 22°, Dual
- 15°/22°

Features: Lens: Two high precision, injection moulded TIR collimating lenses provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visible to 1000+ metres Integrated lithium polymer battery with on board battery protection circuit. Rechargeable via built in USB (Universal Serial Bus) plug & extension cable (included). This saves using about 600 AAA Alkaline batteries during the light's lifetime. Constant current drive technology maintains consistent brightness throughout specified run-time. Integrated USB (Universal Serial Bus) plug is waterproof & designed not be damaged by exposure. 5 hour charge time Replaceable straps for tool-less attachment, 1 x Short (for ├©22-28mm) 1 x Long (for ├©29-35mm) Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). Low battery indicator Thermal management automatically regulates the light output for optimum performance when the bike is stationary & in motion. Accessories: USB (Universal Serial Bus) Extension Cord, Helmet Mount Kit. Tested against dropping, corrosion, UV, electrical shock & static, vibration & impact, temperature & humidity, as well as cycle testing & CE certification.










...

The Blinder ROAD 400 is the performance light for the ultimate road cyclist. Packing 400 lumens of light & using two of the latest high-intensity LUMILEDS LEDS ensures roads & paths are flooded with light, no matter where you ride. With incredible power / weight ratio & dual + constant flash modes, you won't find another light like this. Specifications: Dimensions: 53x 30x 75mm Weight: 105g

Materials: UV-resistant industrial grade silicone rubber body & strap. Polycarbonate housing. PMMA Lens. Anodised aluminium heat sink. Anodised aluminium fascia & solid stainless steel MIM latch. LEDs: 2 x Lumileds Luxeon Z ES Battery: Integrated rechargeable Lithium Polymer. Peak brightness: 400 Lumens 11 Light modes: 1. Narrow Low Beam, 2. Narrow Medium Beam, 3. Narrow High Beam, 4. Wide Low Beam, 5. Wide Medium Beam, 6. Wide High Beam, 7. Dual Low Beam, 8. Dual Medium Beam, 9. Dual High Beam, 10. Alternating LEDs Flashing, 11. 1 LED Steady/1 LED flashing Run-time (steady): Low
- 7hr, High
- 2hrs. Run-time (flash): Alternating Flash
- 9hrs, Steady Flash
- 4.5hrs Waterproof: 100% Waterproof & Dustproof to IP67. Beam angles (degrees): Narrow
- 15°, Wide
- 22°, Dual
- 15°/22°

Features: Lens: Two high precision, injection moulded TIR collimating lenses provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visible to 1000+ metres Integrated lithium polymer battery with on board battery protection circuit. Rechargeable via built in USB (Universal Serial Bus) plug & extension cable (included). This saves using about 600 AAA Alkaline batteries during the light's lifetime. Constant current drive technology maintains consistent brightness throughout specified run-time. Integrated USB (Universal Serial Bus) plug is waterproof & designed not be damaged by exposure. 5 hour charge time Replaceable straps for tool-less attachment, 1 x Short (for ├©22-28mm) 1 x Long (for ├©29-35mm) Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). Low battery indicator Thermal management automatically regulates the light output for optimum performance when the bike is stationary & in motion. Accessories: USB (Universal Serial Bus) Extension Cord, Helmet Mount Kit. Tested against dropping, corrosion, UV, electrical shock & static, vibration & impact, temperature & humidity, as well as cycle testing & CE certification.










...

Lightweight, compact & USB (Universal Serial Bus) rechargeable—the new Blinder Road 600, Blinder Mount & Blinder Mini Square light set has it all. The Blinder Road 600 light features dual-beam optics that are designed to project more light onto the road ahead, all while doing so in a lightweight, compact size. The Blinder Mini Square features efficient COB LEDs, an integrated USB (Universal Serial Bus) arm for charging & interchangeable silicone straps designed to accommodate all frame & tube sizes. Packaged together, this set is perfect for the cyclist looking for a higher-powered dual beam light up front, & a punchy yet discreet rear light. ...

With the Knog Blinder Road 2 Knog introduces its first generation of Hi-powered bike lights specifically designed for road cycling. Delivering a colossal 200 lumen beam of light on the front they're the first Blinder lights of their kind to give riders 100% visibility & freedom at night all from a super-compact super-light USB (Universal Serial Bus) rechargeable waterproof integrated silicone package. Key

Features: LEDs: 2 x CREE XB-D LEDs Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visibility: Visible from a distance of min. 1000 metres Beam Angle (degrees): Wide beam 22°
- Hi/ Low. Narrow beam 15°
- Hi/ Low. Dual beam 15 & 22° combined
- Hi/ Low. Li Po Technology with battery protection circuit. USB (Universal Serial Bus) Rechargeable & extension cord included. Constant current drive technology: Maintains consistent brightness throughout specified run-time. Integrated USB (Universal Serial Bus) Plug: Designed to be exposed to the elements the plug is also waterproof & will not be damaged by exposure. Waterproof: 100% Waterproof & Dust Proof. Light Modes: Total of 8 light modes: 1. Narrow low beam 2. Narrow high beam 3. Wide low beam 4. Wide high beam 5. Dual low beam 6. Dual high beam 7. Flashing alternate 8. Flashing-1 LED steady/1 LED flashing. Burn time: Low-beam modes: Steady 2hr Flash mode 6hr. High-beam modes: Steady 1hr / Flash mode: 4hr. Charge time: 5 hour charge time Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly the light is switched off with a long button push off (0.5sec). Low battery indicator Thermal management: Automatically regulates the light output for optimum performance when the bike is stationary & in motion. Bike Attachment: Two removable silicone straps for bars 22-28mm / 29-35mm. Helmet mount included Testing: The Blinder Road 2 has been tested against the following; drop tests corrosion tests UV tests electrical shock & static vibration & impact temperature & humidity cycle testing & CE certification. Technical Specifications: 200 Lumens Dimensions: 53 x 30 x 63mm Weight: 75g

Materials: UV-Resistant industrial-grade silicone rubber body & straps polycarbonate housing PMMA lens anodised aluminium heat sink anodised aluminium fascia & solid stainless steel MIMLatch Rechargeable lithium polymer (USB): Saves using about 600 AAA Alkaline batteries during the lights lifetime






...

With the Knog Blinder Road 2 Knog introduces its first generation of Hi-powered bike lights specifically designed for road cycling. Delivering a colossal 200 lumen beam of light on the front they're the first Blinder lights of their kind to give riders 100% visibility & freedom at night all from a super-compact super-light USB (Universal Serial Bus) rechargeable waterproof integrated silicone package. Key

Features: LEDs: 2 x CREE XB-D LEDs Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visibility: Visible from a distance of min. 1000 metres Beam Angle (degrees): Wide beam 22°
- Hi/ Low. Narrow beam 15°
- Hi/ Low. Dual beam 15 & 22° combined
- Hi/ Low. Li Po Technology with battery protection circuit. USB (Universal Serial Bus) Rechargeable & extension cord included. Constant current drive technology: Maintains consistent brightness throughout specified run-time. Integrated USB (Universal Serial Bus) Plug: Designed to be exposed to the elements the plug is also waterproof & will not be damaged by exposure. Waterproof: 100% Waterproof & Dust Proof. Light Modes: Total of 8 light modes: 1. Narrow low beam 2. Narrow high beam 3. Wide low beam 4. Wide high beam 5. Dual low beam 6. Dual high beam 7. Flashing alternate 8. Flashing-1 LED steady/1 LED flashing. Burn time: Low-beam modes: Steady 2hr Flash mode 6hr. High-beam modes: Steady 1hr / Flash mode: 4hr. Charge time: 5 hour charge time Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly the light is switched off with a long button push off (0.5sec). Low battery indicator Thermal management: Automatically regulates the light output for optimum performance when the bike is stationary & in motion. Bike Attachment: Two removable silicone straps for bars 22-28mm / 29-35mm. Helmet mount included Testing: The Blinder Road 2 has been tested against the following; drop tests corrosion tests UV tests electrical shock & static vibration & impact temperature & humidity cycle testing & CE certification. Technical Specifications: 200 Lumens Dimensions: 53 x 30 x 63mm Weight: 75g

Materials: UV-Resistant industrial-grade silicone rubber body & straps polycarbonate housing PMMA lens anodised aluminium heat sink anodised aluminium fascia & solid stainless steel MIMLatch Rechargeable lithium polymer (USB): Saves using about 600 AAA Alkaline batteries during the lights lifetime






...

With the Knog Blinder Road 2 Knog introduces its first generation of Hi-powered bike lights specifically designed for road cycling. Delivering a colossal 200 lumen beam of light on the front theyre the first Blinder lights of their kind to give riders 100% visibility & freedom at night all from a super-compact super-light USB (Universal Serial Bus) rechargeable waterproof integrated silicone package. Key

Features: LEDs: 2 x CREE XB-D LEDs Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visibility: Visible from a distance of min. 1000 metres Beam Angle (degrees): Wide beam 22°
- Hi/ Low. Narrow beam 15°
- Hi/ Low. Dual beam 15 & 22° combined
- Hi/ Low. Li Po Technology with battery protection circuit. USB (Universal Serial Bus) Rechargeable & extension cord included. Constant current drive technology: Maintains consistent brightness throughout specified run-time. Integrated USB (Universal Serial Bus) Plug: Designed to be exposed to the elements the plug is also waterproof & will not be damaged by exposure. Waterproof: 100% Waterproof & Dust Proof. Light Modes: Total of 8 light modes: 1. Narrow low beam 2. Narrow high beam 3. Wide low beam 4. Wide high beam 5. Dual low beam 6. Dual high beam 7. Flashing alternate 8. Flashing-1 LED steady/1 LED flashing. Burn time: Low-beam modes: Steady 2hr Flash mode 6hr. High-beam modes: Steady 1hr / Flash mode: 4hr. Charge time: 5 hour charge time Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly the light is switched off with a long button push off (0.5sec). Low battery indicator Thermal management: Automatically regulates the light output for optimum performance when the bike is stationary & in motion. Bike Attachment: Two removable silicone straps for bars 22-28mm / 29-35mm. Helmet mount included Testing: The Blinder Road 2 has been tested against the following; drop tests corrosion tests UV tests electrical shock & static vibration & impact temperature & humidity cycle testing & CE certification. Technical Specifications: 200 Lumens Dimensions: 53 x 30 x 63mm Weight: 75g

Materials: UV-Resistant industrial-grade silicone rubber body & straps polycarbonate housing PMMA lens anodised aluminium heat sink anodised aluminium fascia & solid stainless steel MIMLatch Rechargeable lithium polymer (USB): Saves using about 600 AAA Alkaline batteries during the lights lifetime






...