The Ansmann Photo Cam III is a microcontrolled, negative delta V contolled battery charger. Complete with x 4 Ansmann AA 2700m Ah Ni MH fast rechargeable batteries this Ansmann Photo Cam III battery charger is suitable for charging two or four AA / AAA rechargeable batteries.
- Plug-in charger for 2-4 Micro AAA or Mignon AA cells
- Microprocessor control guarantee best charging results independent of capacity, charge status & type of batteries
- Fast charge
- Protection against reverse polarity
- Trickle charge avoids discharge of cells after fast charge
- Charging status indicators Charging currents are as follows: AA / AAA = 400m A





...

The Ansmann Photo Cam III comes complete with 4 x AA 2850m Ah rechargeable batteries & can charge 2 or 4, AA or AAA batteries. The charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge
- 500m A charge current. Charging is Approx. 8 hours for 2850m Ah cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for Ni MH or Ni Cd batteries. Comes with compact & lightweight UK plug top housing for 230V mains operation.
- For 2x/4x Micro AAA, Mignon AA- Charging currents: Micro AAA 500m A, Mignon AA 500m A- Charging time for Mignon 1000m Ah is 2.4h- Charging status indicator via LED- Over charging protection by Delta peak detection & safety timer- Faulty cell detection- Alkaline insertion error detection- Reverse connect protection- Trickle charging- Wide range input 100-240V AC- Including 4x Mignon AA 2850m Ah Digital or 4x Mignon AA 2100m Ah max E- Dimension: 120x 68x 72mm- Weight: 280g- 3 years warranty

...

The Ansmann Photo Cam III comes complete with 4 x AA 2850m Ah rechargeable batteries & can charge 2 or 4, AA or AAA batteries. The charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge
- 500m A charge current. Charging is Approx. 8 hours for 2850m Ah cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for Ni MH or Ni Cd batteries. Comes with compact & lightweight UK plug top housing for 230V mains operation.
- For 2x/4x Micro AAA, Mignon AA
- Charging currents: Micro AAA 500m A, Mignon AA 500m A
- Charging time for Mignon 1000m Ah is 2.4h
- Charging status indicator via LED
- Over charging protection by Delta peak detection & safety timer
- Faulty cell detection
- Alkaline insertion error detection
- Reverse connect protection
- Trickle charging
- Wide range input 100-240V AC
- Including 4x Mignon AA 2850m Ah Digital or 4x Mignon AA 2100m Ah max E
- Dimension: 120x 68x 72mm
- Weight: 280g
- 3 years warranty














...

The Ansmann Photo Cam III comes complete with 4x max E AA 2100m Ah rechargeable batteries & can charge 2 or 4, AA or AAA batteries. The AA max E battery has a capacity of 2100m Ah & is delivered pre-charged with the very low self-discharge max E characteristics. This means that it can be used in most applications even up to one year after charging. This charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge
- 500m A charge current. Charging is Approx. 5 hours for 2100m Ah cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for Ni MH or Ni Cd batteries. Comes with compact & lightweight UK plug top housing for 230V mains operation.
- For 2x/4x Micro AAA, Mignon AA- Charging currents: Micro AAA 500m A, Mignon AA 500m A- Charging time for Mignon 1000m Ah is 2.4h- Charging status indicator via LED- Over charging protection by Delta peak detection & safety timer- Faulty cell detection- Alkaline insertion error detection- Reverse connect protection- Trickle charging- Wide range input 100-240V AC- Including 4x Mignon AA 2100m Ah max E- Dimension: 120x 68x 72mm- Weight: 280g- 3 years warranty

...

The Ansmann Photo Cam III comes complete with 4x max E AA 2100m Ah rechargeable batteries & can charge 2 or 4, AA or AAA batteries. The AA max E battery has a capacity of 2100m Ah & is delivered pre-charged with the very low self-discharge max E characteristics. This means that it can be used in most applications even up to one year after charging. This charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge
- 500m A charge current. Charging is Approx. 5 hours for 2100m Ah cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for Ni MH or Ni Cd batteries. Comes with compact & lightweight UK plug top housing for 230V mains operation.
- For 2x/4x Micro AAA, Mignon AA
- Charging currents: Micro AAA 500m A, Mignon AA 500m A
- Charging time for Mignon 1000m Ah is 2.4h
- Charging status indicator via LED
- Over charging protection by Delta peak detection & safety timer
- Faulty cell detection
- Alkaline insertion error detection
- Reverse connect protection
- Trickle charging
- Wide range input 100-240V AC
- Including 4x Mignon AA 2100m Ah max E
- Dimension: 120x 68x 72mm
- Weight: 280g
- 3 years warranty














...

The Ansmann Photo Cam V is a fast, intelligent charger with the following charging currents: 800m A for 1-2 AA, C or D; 400m A for 3-4 AA, C or D; 400m A for 1-2 AAA; 200m A for 3-4 AAA; 15m A for 1 9V block. There is a capacity test for Approx. 5 seconds after the insertion of the cells & a microprocessor controller monitors each set of cells inserted & individual charging of each cell position. This Charger can tell if you have accidentally inserted an Alkaline battery & has Delta Peak detection to ensure the batteries do not get overcharged. It is available for worldwide use due to the 100-240V AC power supply.
- For charging up to 4x Micro AAA, Mignon AA, Baby C, Mono D, 1x 9V E-Block- Charging currents: Micro AAA 400/200m A, Mignon AA 800/400m A, Baby C 800/400m A, Mono D 800/400m A, 9V E-Block 15m A- Charging time for Mignon AA 1000m Ah 1.5h (1.2)/3h (3-4)- Charging status indicator via LED- Individual charging of each cell position- Reverse polarity protection- Worldwide use (100-240V AC / 50-60 Hz)- Capacity quick test for approx. 5 seconds after inserting the cells- Microprocessor controlled charging- Automatic charging current adjustment- Multiple over-charging protection- Trickle charging- Faulty cell detection / accidental Alkaline insertion detection- Dimension: 170x 155x 50mm- Weight: 430g- 3 year warranty
...

The Ansmann Photo Cam V is a fast, intelligent charger with the following charging currents: 800m A for 1-2 AA, C or D; 400m A for 3-4 AA, C or D; 400m A for 1-2 AAA; 200m A for 3-4 AAA; 15m A for 1 9V block. There is a capacity test for Approx. 5 seconds after the insertion of the cells & a microprocessor controller monitors each set of cells inserted & individual charging of each cell position. This Charger can tell if you have accidentally inserted an Alkaline battery & has Delta Peak detection to ensure the batteries do not get overcharged. It is available for worldwide use due to the 100-240V AC power supply.
- For charging up to 4x Micro AAA, Mignon AA, Baby C, Mono D, 1x 9V E-Block
- Charging currents: Micro AAA 400/200m A, Mignon AA 800/400m A, Baby C 800/400m A, Mono D 800/400m A, 9V E-Block 15m A
- Charging time for Mignon AA 1000m Ah 1.5h (1.2)/3h (3-4)
- Charging status indicator via LED
- Individual charging of each cell position
- Reverse polarity protection
- Worldwide use (100-240V AC / 50-60 Hz)
- Capacity quick test for approx. 5 seconds after inserting the cells
- Microprocessor controlled charging
- Automatic charging current adjustment
- Multiple over-charging protection
- Trickle charging
- Faulty cell detection / accidental Alkaline insertion detection
- Dimension: 170x 155x 50mm
- Weight: 430g
- 3 year warranty















...

Encased in a high quality aluminium housing the Ansmann Portable Power Pack Vario is a universal external Li-Polymer battery pack suitable for use with laptop & notebook computers, portable DVD players & other devices. Featuring powerful internal 6600m Ah Li-polymer cells the Ansmann Portable Power Pack Vario can double the operating time of the internal battery of some Notebooks. The Ansmann Portable Power Pack Vario has, 5V USB (Universal Serial Bus) power output, 5 LED's showing charge level indication & is supplied with different adapters offering a wide range of compatibility with many laptops.
- Output voltage 16V/19V DC (switchable)
- USB (Universal Serial Bus) port output voltage 5V
- 6600m Ah battery capacity. Please note: Image is for reference only, this product does not include additional devices.


...

The Ansmann Powerline 4 Mobil is a microprocessor controlled smart charger. Suitable for charging 2 / 4 pcs of Ni Cd / Ni MH batteries of AA / AAA the Ansmann Powerline 4 Mobil can also charge the 9V blcok cell. Features include, discharge function & charging indicator for cylindrical cells plus faulty cell detection. The Ansmann Powerline 4 also

Includes:: a 230V AC & 12V DC adapter.
- Microprocessor controlled smart charger
- Charges 2/4 AAA or AA cells or 1 x 9 V block
- Discharge function for cylindrical cells
- Incl. AC- & DC-adaptor for home & mobile use Charging currents are as follows: AA / AAA = 500m A 9V = 15m A





...

The Ansmann Powerline 4 Mobil is a microprocessor controlled smart charger. Suitable for charging 2 / 4 pcs of Ni Cd / Ni MH batteries of AA / AAA the Ansmann Powerline 4 Mobil can also charge the 9V block cell. Features include, discharge function & charging indicator for cylindrical cells plus faulty cell detection. The Ansmann Powerline 4 also

Includes:: a 230V AC & 12V DC adapter.
- Microprocessor controlled smart charger
- Charges 2/4 AAA or AA cells or 1 x 9 V block
- Discharge function for cylindrical cells
- Incl. AC- & DC-adaptor for home & mobile use Charging currents are as follows: AA / AAA = 500m A 9V = 15m A





...