The Ansmann Energy 16 Plus is a high-tech desktop battery charger, suitable for Ni MH/ Ni Cd rechargeable batteries, that has micro-processor controlled high speed charging for AA, AAA, C, D, & 9V batteries. It features a capacity quick test of the inserted cells for approx 10 seconds: LED green: capacity over 80% of the nominal capacity, LED orange: capacity between 25-80% of the nominal capacity, LED red: capacity under 25% of the nominal capacity. It also features auto-diagnosis of the inserted cells with automatic start of a pre- charging and/or refreshing process, if required, tired cells will be activated Features
- Fast charging
- Microprocessor controlled charging
- Battery-full detection (-d V)
- Automatic switch to trickle charge
- Multiple over charging protection
- Individual supervision of each cell position
- Faulty cell & alkaline battery detection
- Easiest handling due to fully automatic control
- Clear indicators & controls for each charging position
- Reverse polarity protection
- For worldwide use
- 3 years warranty Specification:
- Input voltage: 100-240V AC / 50-60 Hz
- Charging time for Mignon AA 1000m Ah: 1.2h
- Charging currents: Mono D: 6x 1000m A, Baby C: 6x 1000m A, Mignon AA: 12x 1000m A, Micro AAA: 12x 400m A, 9V E-Block: 2x 60m A, USB: 2x 1000m A














...

High-tech plug-in charger with automatic refresh/discharge function; capacity quick test for up to 4 cells at the same time. The Ansmann Energy 4 is a plug-in charger for 1-4 Micro AAA or Mignon AA rechargeable batteries or 1-2 pcs 9V block batteries.
- Diagnosis of inserted cells
- Automatic refresh/discharge function
- Faulty battery detection
- Better performance of batteries
- Capacity quick test
- Intelligent charge control
- Super fast charging
- Individual charging process for each battery
- Worldwide use due to electronic switch mode power supply & interchangeable power supply ** With primary plug set & switch mode power supply for worldwide use** Dimensions: 93 x 132 x 58 mm Weight: 260 grm 3 year warranty Please Note: This charger does not come with batteries.








...

High-tech plug-in charger with automatic refresh/discharge function; capacity quick test for up to 4 cells at the same time. The Ansmann Energy 4 is a plug-in charger for 1-4 Micro AAA or Mignon AA rechargeable batteries or 1-2 pcs 9V block batteries.
- Diagnosis of inserted cells
- Automatic refresh/discharge function
- Faulty battery detection
- Better performance of batteries
- Capacity quick test
- Intelligent charge control
- Super fast charging
- Individual charging process for each battery
- Worldwide use due to electronic switch mode power supply & interchangeable power supply ** With primary plug set & switch mode power supply for worldwide use** Dimensions: 93 x 132 x 58 mm Weight: 260 grm 3 year warranty Please Note: This charger does not come with batteries.








...

The Ansmann Energy 4 Speed Set is a microprocessor controlled fast charger. The charger can be used to charge 1 to 4 AA or AAA rechargeable batteries. The charging current is optional from 2100 or 850m A for AA size & 850 or 350m A for AAA size. Features of this charger include: Special cooling technology; -delta V charging technology; temperature control; cell temperature Tracking; Zero Delta V detection & trickle charge function. The Ansmann Energy 4 Speed charger is powered by an external switch mode power supply, it is possible to use this charger worldwide & also via the 12V car socket adaptor.- Charges 1-4 AA or AAA
- Adjustable charging current by a switch Fast charge
- Standard charge (2100m A/850m A for AA cells & 850m A/350m A for AAA cells
- Multiple over charging protection by -delta V detection, temperature control & safety timer
- Trickle charging; faulty cell & Alkaline detection
- Reverse polarity protection
- Cooling of the batteries by a fan
- Battery status is displayed by LED per charging slot
- External power supply with wide range input 100-240V AC & 12V car adapter







...

The Ansmann Energy 4 Speed Set is a microprocessor controlled fast charger. The charger can be used to charge 1 to 4 AA or AAA rechargeable batteries. The charging current is optional from 2100 or 850m A for AA size & 850 or 350m A for AAA size. Features of this charger include: Special cooling technology; delta V charging technology; temperature control; cell temperature Tracking; Zero Delta V detection & trickle charge function. The Ansmann Energy 4 Speed charger is powered by an external switch mode power supply, it is possible to use this charger worldwide & also via the 12V car socket adaptor.
- Charges 1-4 AA or AAA
- Adjustable charging current by a switch Fast charge
- Standard charge (2100m A/850m A for AA cells & 850m A/350m A for AAA cells
- Multiple over charging protection by -delta V detection, temperature control & safety timer
- Trickle charging; faulty cell & Alkaline detection
- Reverse polarity protection
- Cooling of the batteries by a fan
- Battery status is displayed by LED per charging slot
- External power supply with wide range input 100-240V AC & 12V car adapter








...

The new Energy 8 PLUS High Quality High-tech charger has automatic refresh/discharge function & capacity quick test for up to 8 cells at the same time. Energy 8 PLUS now features alkaline battery detection & change in voltage & temperature detection. Ansmann Energy 8 desktop battery charger can charge the following cells; 1-6 AAA Cells 1-6 AA Cells 1-4 C or D Cells 1-2 9V Cells Auto-diagnosis of the inserted cells with automatic start of a refreshing process, if required. Damaged cells will be detected & discharged before fast charging.
- Diagnosis of inserted cells
- Automatic refresh/discharge function
- Faulty battery detection
- Better performance of batteries
- Microprocessor control
- Capacity quick test
- Intelligent charge control
- Super fast charging
- Individual charging process for each battery
- Worldwide use due to electronic switch mode power supply & interchangeable power supply Dimensions: 198 x 203 x 70 mm Weight: 710 grms Please Note: Batteries Not Included.









...

The Ansmann XC3000 is a comprehensive high-tech battery management system for Ni Cd, Ni MH, Li-Ion & Li-Po rechargeable batteries that can be used worldwide. Suitable for charging, discharging, capacity testing & cycling of 1-8 AAA or AA cells, 1-4 C or D cells, 1-2 9V Blocks, one Li-Ion/ Li-Po (3.6/3.7V-7.2/7.4V). The Ansmann XC3000 provides microprocessor controlled supervision of each cell, faulty cell detection, alkaline cell detection, five way over-charge protection & trickle charge. With selectable charge current for cylindrical cells, automatic polarity & voltage detection for Li-Ion / Li-Po batteries, the XC3000 offers quick capacity testing for a wide range of batteries. The Ansmann Energy XC3000 unit is powered by a switch mode power supply which means it can be used worldwide (100-240V wide range input). ...

The Ansmnn Flex Light is a portable LED light with a USB (Universal Serial Bus) socket. The flexible LED light has 5 super-bright LEDs also to illuminate the keyboard of laptop / computer. The additional blue light reduces eyestrain. The book clip is powered with 3 AAA batteries (not included) &

Includes:: a magnetic base & a mounting clip allowing you to fix the light anywhere. The energy saving LED technology guarantees very long operating times with one set of batteries. Features Can be used as a book light or on laptops Powered by batteries or over USB (Universal Serial Bus) port Incl. magnetic base & mounting clip Portable LED light with USB (Universal Serial Bus) socket Useful with computer keyboards or laptops & also when reading The bluelight reduces eyestrain Energy saving LED technology
- for longer battery life Requires 3 x AAA alkaline batteries 3 year Warranty Note: To prevent malfunction of the light, don't put the batteries incorrectly into the battery compartment, paying attention to polarity & make sure the USB (Universal Serial Bus) end of the flex light is correctly inserted in the battery compartment.


...

The Ansmann Future 1AA Plus CREE LED Torch is a rugged aluminium torch featuring a high performance CREE LED offering extreme light intensity coupled with superb reliability. Incredibly robust, shock, scratch & splash-proof the professional standard Ansmann Future 1AA Plus CREE LED Torch can be powered with 1 x AA lithium, alkaline or rechargeable battery. What sets this Ansmann torch apart from a standard LED torch is the high performance CREE LED which offers exceptional brightness & an incredible operating life time of over 50, 000 hours.

Features:
- Low operating costs
- Extreme brightness
- Long operating time
- Extreme long life time
- High reliability
- Tested to highest requirements of the LED industry Beam: approx./ca. 50 m Operating time: approx. / ca. 5-6h Lumen: 30 Bulb: CREE LED XR-E 0.5W Type of cells: 1x AA Battery Warranty: 2 Years







...

The Ansmann Future 1AA Plus CREE LED Torch is a rugged aluminium torch featuring a high performance CREE LED offering extreme light intensity coupled with superb reliability. Incredibly robust, shock, scratch & splash-proof the professional standard Ansmann Future 1AA Plus CREE LED Torch can be powered with 1 x AA lithium, alkaline or rechargeable battery. What sets this Ansmann torch apart from a standard LED torch is the high performance CREE LED which offers exceptional brightness & an incredible operating life time of over 50, 000 hours.

Features:
- Low operating costs
- Extreme brightness
- Long operating time
- Extreme long life time
- High reliability
- Tested to highest requirements of the LED industry Beam: approx./ca. 50 m Operating time: approx. / ca. 5-6h Lumen: 30 Bulb: CREE LED XR-E 0.5W Type of cells: 1x AA Battery Warranty: 2 Years







...