The USB3S2SAT3CB USB (Universal Serial Bus) 3.0 to SATA adapter cable lets you connect a 2.5" SATA hard drive or solid state drive to your computer through an available USB (Universal Serial Bus) port -- the easiest way to upgrade the hard drive in your laptop by adding an external SSD via USB (Universal Serial Bus) 3.0. The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB (Universal Serial Bus) 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details. This portable adapter features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case. Plus, the cable-style adapter makes it easy to swap between hard drives without having to install your drives into an enclosure. Perfect for easy drive access for data migration, drive cloning & data backup applications. The USB3S2SAT3CB is backed by a Star Tech.com 2-year warranty & free lifetime technical support.

Specification Hardware Bus Type: USB (Universal Serial Bus) 3.0 Chipset ID: ASMedia
- ASM1153E Compatible Drive Types: SATA Drive

Size: 2.5in Fan (s): No Interface: USB (Universal Serial Bus) 3.0 Number of Drives: 1 Performance General Specifications: Max power of the attached drive is 900 m A Max Drive Capacity: Currently tested with up to 2TB 5900 RPM hard drives Type & Rate: USB (Universal Serial Bus) 3.0
- 5 Gbit/s, SATA III (6 Gbps) UASP Support: Yes Connector (s) Drive Connectors: 1
- SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors: 1
- USB (Universal Serial Bus) Type-A (9 pin) USB (Universal Serial Bus) 3.0 Male Software OS Compatibility: OS independent; No software or drivers required







...

Does your regular USB (Universal Serial Bus) 3.0 cable lift or push against your external hard drive causing it to move around on your desk? Are you forced to arrange your desk according to how your cable decides to bend & rest? The USB3AUB3MS features a slim USB (Universal Serial Bus) wire construction that makes it easier to install your USB (Universal Serial Bus) 3.0 devices & enables you to place them as needed throughout your workspace. Plus, the thin Micro USB (Universal Serial Bus) connector molding makes this a great cable for mobile USB (Universal Serial Bus) 3.0 devices too
- it lets you plug into your device without having to take it out of its case for every charge & sync. Organize your desk & your office to match your needs. This durable, lightweight cable is Approx. half the thickness of a regular USB (Universal Serial Bus) 3.0 cable giving you the freedom to place your devices as needed & with minimal clutter. The flexible, thin cable also reduces strain on the connection & prevents damage to the USB (Universal Serial Bus) 3.0 port on your device. Provide full charging power, with no loss of charge time, even at distances of up to 3 meters away from your charger. As well as being ideal for connecting to your desktop devices, this cable provides the perfect solution for charging & syncing your USB (Universal Serial Bus) 3.0 Micro B-equipped phones & tablets. The long charge cable overcomes distance restrictions & lets you stay connected even while you're taking notes in a boardroom, catching up on emails in a hotel room, or reading in a coffee shop. Stop removing the case from your phone or tablet every time you charge or sync your device. The cable offers a thin Micro USB (Universal Serial Bus) connector molding that plugs into your device even while it's inside a protective case. This Micro USB (Universal Serial Bus) 3.0 cable is backed by Star Tech.com's Lifetime warranty for guaranteed reliability. Box Contains 1 x 3M Slim Super Speed USB (Universal Serial Bus) 3.0 A to Micro B Cable
- M/M

...

The cable features high quality Shielded Twisted Pair (STP) construction, helping to prevent electro-magnetic interference & ensuring reliable data communication, which ensures a quick & easy way to connect to an external storage solution for throughput of up to 5 Gbps when used with a USB (Universal Serial Bus) 3.0 host & device. The 1ft USB (Universal Serial Bus) 3.0 A to Micro B cable is backed by our Lifetime Warranty, providing guaranteed quality & reliability. ...

For fast performance & efficient data transfers when connected through e SATA, the docking station supports full SATA III transfer speeds -- up to 6 Gbps. For universal compatibility, the dock can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. The hard drive docking station supports the fastest drive technologies including SATA III (6 Gbps), hybrid drives & solid state drives (SSD), ensuring you can save time by getting the most out of your drive performance. To ensure compatibility with your computer system, the SDOCK2U33EB supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. enhanced Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. Key Features
- Support SATA III (6 Gbps) & UASP for optimal performance
- e SATA or USB (Universal Serial Bus) host connection
- Compatible with USB (Universal Serial Bus) 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps)
- System builders & I.T. specialists who need quick access to drives for imaging
- Backup data quickly to an external drive for archiving
- Transferring data from one hard drive to another
- Technicians who test or benchmark multiple hard drives
- Backup important data & easily take the drive to an offsite location for safekeeping Specifications Chipset ID: JMicron
- JMS562 Compatible Drive Types: SATA Drive Installation: Removable Drive

Size: 2.5in & 3.5in Interface: USB (Universal Serial Bus) 3.0 & e SATA Number of Drives: 2 Insertion Rating: 15, 000 Cycles Max Drive Capacity: Currently tested with up to 4TB 7200rpm 3.5" hard drives per bay (8TB total) & 2TB 5900 RPM 2.5" hard drives (2TB total) Port Multiplier: Yes Type & Rate: USB (Universal Serial Bus) 3.0
- 5 Gbit/s SATA III (6 Gbps) UASP Support: Yes Drive Connectors: 2
- SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors: 1
- e SATA (7 pin, Data) Female 1
- USB (Universal Serial Bus) Type-B (9 pin) USB (Universal Serial Bus) 3.0 Female OS Compatibility: OS independent; No software or drivers required LED Indicators: 1
- Power 1
- Drive 1 Activity 1
- Drive 2 Activity Input Current: 1.5 A Input Voltage: 100 ~ 240 AC Output Current: 3.0 A Output Voltage: 12 DC Plug Type: M Power Consumption (In Watts): 36 Power Source: AC Adapter Included Humidity: 20%RH~80%RH Operating Temperature: 5°C to 35°C (41°F to 95°F) Storage Temperature: -20°C to 50°C (-4°F to 122°F)
Colour: Black Enclosure Type: Plastic Product

Height: 70 mm [2.8 in] Product Length: 143 mm [5.6 in] Product Weight: 524 g [18.5 oz] Product

Width: 132 mm [5.2 in] Box Contents 1
- USB (Universal Serial Bus) 3.0/e SATA to Dual 2.5/3.5in SATA Hard Drive Docking Station 1
- USB (Universal Serial Bus) 3.0 Cable 1
- e SATA Cable 1
- Universal Power Adapter (NA, EU, UK, ANZ) 1
- Instruction Manual



























...

Light-weight & tool-free for easy portability Engineered with a durable & lightweight housing, the enclosure tucks easily into a laptop bag or carrying case for portable storage. It's completely tool-free so you can install your drives quickly on the fly. Harness the speed of USB (Universal Serial Bus) 3.1 Gen 2 USB (Universal Serial Bus) 3.1 Gen 2 gives you greater bandwidth & speed with file transfer rates of up to 10 Gbps
- twice the speed of USB (Universal Serial Bus) 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs & hard drives, while alleviating bottlenecks in your data transfer. Powered directly from USB (Universal Serial Bus) port The enclosure connects easily to a host computer, with no external power required. It comes with a USB (Universal Serial Bus) A to Micro B cable, providing backward compatibility with existing USB (Universal Serial Bus) ports or hardware. It also provides UASP support for enhanced performance. The S251BPU313 is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Box contains: 1-USB 3.1 to 2.5" SATA HDD enclosure 1-HDD pad 1-USB cable 1-quick start guide
...

Harness the speed of USB (Universal Serial Bus) 3.1 Gen 2 USB (Universal Serial Bus) 3.1 Gen 2 gives you greater bandwidth & speed with file transfer rates of up to 10 Gbps
- twice the speed of USB (Universal Serial Bus) 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs & hard drives, while alleviating bottlenecks in your data transfers. Top-loading design for easy drive access It’s never been easier to dock & swap drives from your desktop computer or laptop. Simply insert your drives into the top loading slot, with no tools or trays required. The HDD ejection button allows fast & simple drive removal. Convenient compatibility The docking station comes with a USB (Universal Serial Bus) Type-A to B cable, providing backward compatibility with your existing USB (Universal Serial Bus) 3.0, 2.0 & 1.x devices. It also supports UASP for enhanced performance. Key Features
- Access data from one 2.5 or 3.5” SATA SDD/HDD over ultra-fast USB (Universal Serial Bus) 3.1 Gen 2
- Access drives at full speed with support of SATA I, II & III (up to 6 Gbps)
- Top-loading design with built-in ejection button for easy drive access
- Perfect for system builders & IT professionals who need quick access to drives for imaging
- Back up data quickly to an external drive for archiving
- Transfer data from one hard drive to another
- Easily take backup data to an offsite location for safekeeping Specifications Bus Type: USB (Universal Serial Bus) 3.1 Gen 2 Chipset ID: ASMedia
- ASM1351 Compatible Drive Types: SATA Drive Installation: Removable Drive

Size: 2.5in & 3.5in Fan (s): No Interface: USB (Universal Serial Bus) 3.1 Gen 2 Number of 2.5 " bays: 2 Number of Drives: 1 4 Kn Support: Yes Max Drive Capacity: Currently tested with hard drives up to 6TB at 7200rpm Maximum Data Transfer Rate: 10 Gbps TRIM Support: Yes Type & Rate: USB (Universal Serial Bus) 3.1 Gen 2
- 10 Gbit/s SATA III (6 Gbps) UASP Support: Yes Drive Connectors: 1
- SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors: 1
- USB (Universal Serial Bus) 3.1 USB (Universal Serial Bus) Type-B (9 pin, Gen 2, 10 Gbps) Female LED Indicators: 1
- Power & Activity Center Tip Polarity: Positive Input Current: 0.6 Input Voltage: 100 ~ 240 AC Output Current: 2A Output Voltage: 12 DC Plug Type: M Power Consumption (In Watts): 24 Power Source: AC Adapter Included Humidity: 20% ~ 80% RH Operating Temperature: 5°C to 35°C (35°F to 95°F) Storage Temperature: -20°C to 50°C (-4°F to 122°F)
Colour: Black Enclosure Type: Plastic Product

Height: 63.6 mm [2.5 in] Product Length: 144.8 mm [5.7 in] Product Weight: 392 g [13.8 oz] Product

Width: 92.7 mm [3.6 in] Box Contents 1 x USB (Universal Serial Bus) 3.1 (10 Gbps) Single-Bay Dock for 2.5"/3.5" SATA SSD/HDD 1
- USB (Universal Serial Bus) 3.1 A to B cable
- 40.5 "es 1
- Universal Power Adapter
- 50 "es (cable) 4
- Power Adapter Plugs (NA, EU, UK, ANZ) 1
- Quick Install Guide

























...

Providing quick, yet complete hard drive cloning functionality, this universal dock can operate as a standalone HDD duplicator with no connection to a host computer, delivering an exact 1 to 1 clone of the target hard drive including partition & boot sector information, the Host Protected Area (HPA) as well as user data at a copy rate of 72 MB/sec. A built in LCD screen then allows for tracking the duplication progress, as well as reporting errors on the drives. Supporting both IDE & SATA, this universal duplicator dock enables duplication from SATA to SATA, IDE to SATA or SATA to IDE, & IDE to IDE, as long as the source drive does not exceed the size of the destination drive. Or the docking station can even be used to quickly erase hard drives, for reuse in the future. Functioning as a universal IDE & SATA HDD docking station, the hard drive duplicator can be connected to a computer through USB (Universal Serial Bus) with support for simple plug-&-play installation, allowing users to access hard drive contents without having to mount in an external drive enclosure or open the computer case for conventional drive installation. Large capacity drives (tested with up to 4TB 3.5in & 1TB 2.5in drives per bay) can be used to greatly enhance your computer's storage/backup capabilities. Contained in a small form factor design that makes it a suitable addition to desktop & laptop operating environments, this hard drive duplicator/external HDD docking station is a versatile storage & hard drive cloning utility that also features a host of other built in utilities that are accessible via a built in menu system. Key Features
- Sector-by-Sector drive duplication, including the HPA
- Integrated LCD display for duplication progress & options menu
- Compatible with both SATA (1.5/3.0/6.0 Gbps) & IDE (66/100/133 Mbps) drives
- Disk imaging/hard drive cloning
- create exact replicas of a source drive onto a new drive
- perfect for scenarios/environments where consistency & integrity is crucial (law enforcement & forensics applications)
- SMB, OEM, System Integrators, IT & service technicians requiring quick access to bare external hard drive contents, or the ability to clone data for data / disk recovery.
- Law Enforcement & Forensics
- Quick, hassle-free hard drive backups, data recovery & drive erasing Specifications Chipset ID ACARD
- ARC286 Chipset ID ACARD
- ARC286 Compatible Drive Types SATA & IDEDrive Size 2.5in & 3.5in Interface USB (Universal Serial Bus) 2.0 Number of Drives 2 Duplication Modes Sector by Sector (Whole Drive) Duplication Speed 4.2 G Bpm Erase Modes Quick Erase Insertion Rating 15, 000 Cycles Max Drive Capacity Currently tested with up to 4TB 5400 RPM hard drives per bay (8TB total) & 1TB 5400 RPM 2.5in hard drives (2TB total) Maximum Data Transfer Rate 480 Mbps Supported RAID Modes: BIG (Spanning or Concatenation)JBOD
- (Just a Bunch of Disks)RAID 0 (Striped Disks)RAID 1 (Mirrored Disks) Type & Rate USB (Universal Serial Bus) 2.0
- 480 Mbit/s Drive Connectors: 2
- IDE (40 Pin, EIDE/PATA) Male 2
- LP4 (4 pin, Molex Large Drive Power) Male 2
- SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors 1
- USB (Universal Serial Bus) B (4 pin) Female OS Compatibility OS independent; No software or drivers required Input Voltage 115V-230V ACOutput Current 3 A Output Voltage 12/5V DCPower Consumption (In Watts) 36 Power Source AC Adapter Included Humidity 90% RHOperating Temperature 5°C to 80°C (41°F to 176°F) Storage Temperature -40°C to 70°C (-40°F to 158°F) Color Black Enclosure Type Plastic Product Height 27 mm [1.1 in] Product Length 151 mm [5.9 in] Product Weight 236 g [8.3 oz] Product Width 110 mm [4.3 in] Box Contents 1
- USB (Universal Serial Bus) to IDE SATA Standalone HDD Hard Drive Duplicator Dock 1
- USB (Universal Serial Bus) 2.0 A B Cable 2
- 40 to 44 pin adapters 2
- IDE 40 to 40 pin Cables 2
- LP4 to LP4 Cables 3
- Power Cord (NA/UK/EU) 1
- Universal power adapter 1
- Instruction Manual
























...

This USB (Universal Serial Bus)-C to Display Port adapter cable offers a convenient solution for directly connecting your Display Port over USB (Universal Serial Bus) Type-C device to your Display Port monitor or projector, at up to 1m (3 ft.) away. The adapter works with USB (Universal Serial Bus)-C devices that support DP alt mode, such as the Mac Book, Chrome Book Pixel & Dell XPS models 15 & 13. It's also compatible with Thunderbolt 3 ports. Clutter-free installation At 1m (3 ft.) in length, this adapter cable delivers a compact connection that eliminates excess adapters & cabling, ensuring a tidy, professional installation. For longer installations, we also offer a 1.8m (6 ft.) USB (Universal Serial Bus)-C to DP cable (CDP2DPMM6B), enabling you to choose the right cable length for your custom installation needs. Hassle-free connection with USB (Universal Serial Bus) Type-C The adapter cable is easy to connect, through the versatility & convenience of the USB (Universal Serial Bus) Type-C port on your device. USB (Universal Serial Bus)-C is a reversible connector, so it doesn't matter which way you plug it in, the adapter will always connect, saving you the frustration of trying to insert it correctly when you're docking your computer to your workstation or office hot desk. Astonishing picture quality At four times the resolution of high-definition 1080p, you’ll be amazed at the picture quality of a 4K monitor or television. This adapter cable lets you harness the video capabilities that are built into your USB (Universal Serial Bus) Type-C connection, to deliver the astonishing quality of Ultra HD to your 4K display. Plus, the adapter is backward compatible with 1080p displays, which makes it a great accessory for home, office or other work environments. The CDP2DPMM1MB is backed by a 2-year Star Tech.com warranty & free lifetime technical support. Note: Your USB (Universal Serial Bus)-C equipped device must support video (DP alt mode) to work with this adapter.

Specification Hardware Adapter Style: Cable Adapters Chipset ID: STMicroelectronics
- STM32F072CBU6 Converter Type: Cable Adapters Output Signal: Display Port Ports: 1 Performance Audio Specifications: 7.1 surround sound Maximum Digital Resolutions: 3840x 2160 @ 60 Hz Wide Screen Supported: Yes Supported Resolutions: 1024x 768, 1280x 720 (High-definition 720p), 1920x 1080 (High-definition 1080p), 1920x 1200, 2560x 1440, 2560x 1600, 3840x 2160 (Ultra HD 4K) Connector (s) Connector A: 1
- USB (Universal Serial Bus)-C (24 pin) Display Port Alt Mode Male Input Connector B: 1
- Display Port (20 pin) Male Output Environmental Humidity: 20%-70%RH Operating Temperature: 0°C to 40°C (32°F to 104°F) Storage Temperature: -40°C to 80°C (-40°F to 158°F)




...

Now you can easily connect to a Gigabit network through the USB (Universal Serial Bus)-C or Thunderbolt 3 port on your laptop or desktop computer. This Gigabit Ethernet (Gb E) network adapter provides a reliable network connection without even having to install drivers. It’s ready to go, with native driver support to ensure a quick setup. Powerful Gigabit network connections The USB (Universal Serial Bus) Type-C network adapter supports full Gigabit bandwidth by harnessing the performance of USB (Universal Serial Bus) 3.1 Gen 1 (5 Gbps). You can access very large files over the network at Gigabit speeds. Native driver support makes installation easy Get up & running quickly. Simply plug the adapter into the USB (Universal Serial Bus)-C port on your laptop & connect to your network. The network adapter chipset provides native driver support, so you don't have to worry about installing additional software. Trouble-free connections through USB (Universal Serial Bus)-C The USB (Universal Serial Bus) Type-C connector is smaller & easier to use than previous USB (Universal Serial Bus) connectors. It’s a reversible plug so you can connect to your devices with either side facing up. You can insert the cable the right way every time
- without frustration or the risk of port damage. Compact & lightweight for perfect portability Compact & portable, this USB (Universal Serial Bus) Gigabit network adapter is the ideal desktop network adapter or laptop accessory. It’s powered directly from the USB (Universal Serial Bus) port making it easy to connect when you’re on the go. Plus, its lightweight design makes the adapter the perfect travel accessory for your Chromebook Pixel or Mac Book. The US1GC30W features a white design that looks great with your Apple Mac & is backed by a Star Tech.com 2-year warranty & free lifetime technical support.

Specification Hardware Bus Type: USB (Universal Serial Bus) 3.1 Gen 1 Chipset ID: Realtek RTL8153 Industry Standards: IEEE 802.3, 802.3u & 802.3ab Interface: RJ45 (Gigabit Ethernet) Ports: 1 Power Source: USB (Universal Serial Bus)-Powered Performance Auto MDIX: Yes Compatible Networks: 10/100/1000 Mbps Full Duplex Support: Yes Maximum Data Transfer Rate: 5 Gbps (USB 3.0), 2 Gbps (Ethernet
- Full-Duplex) Type & Rate: USB (Universal Serial Bus) 3.1 Gen 1
- 5 Gbit/s Connector (s) 1
- USB (Universal Serial Bus) Type-C (24 pin) USB (Universal Serial Bus) 3.0 Male External Ports 1
- RJ-45 Female Software OS Compatibility: Windows XP, Vista, 7, 8, 8.1, 10 Windows Server 2003, 2008 R2, 2012, 2016 Mac OS X 10.7 to 10.12 VLAN tagging is currently not supported in Mac OS Linux Kernel 2.6.25 to 4.11.x LTS Versions only






...

This USB (Universal Serial Bus)-C to HDMI adapter lets you output HDMI video & audio from a USB (Universal Serial Bus) Type-C device such as a Mac Book or Chromebook laptop. This adapter works with USB (Universal Serial Bus)-C devices that pass a Display Port video signal. It's also compatible with Thunderbolt 3 ports. Ultimate portability This USB (Universal Serial Bus) type-C video adapter is highly portable with a small footprint & lightweight design. The adapter is the perfect accessory for your Mac Book or Chromebook, fitting easily into your laptop bag or carrying case, which is great for BYOD (Bring Your Own Device) applications at the office. Hassle-free connection with USB (Universal Serial Bus) Type-C This adapter lets you utilize the versatile USB (Universal Serial Bus) Type-C port on your portable device. USB (Universal Serial Bus) Type-C is a reversible connector, so it doesn't matter which way you plug it in, the adapter will always work, saving you the hassle & embarrassment of fiddling with your device when you're trying to deliver a presentation. Astonishing picture quality At four times the resolution of high-definition 1080p, you’ll be amazed at the picture quality of a 4K monitor or television. The adapter lets you harness the video capabilities built into your USB (Universal Serial Bus) Type-C connection, to deliver the astonishing quality of Ultra HD to your 4K display. 4K resolution gives you additional screen space to simplify your approach to detailed work such as editing video & viewing large spreadsheets. Plus, the adapter is backward compatible with 1080p displays, which makes it a great accessory for home, office or other workspace applications. The CDP2HD is backed by a 2-year Star Tech.com warranty & free lifetime technical support. Note: Your USB (Universal Serial Bus)-C equipped device must support video to work with this adapter. Hardware Audio: Yes Chipset ID: STMicroelectronics
- STM32F072CBU6, Parade Tech
- PS171 Converter Type: Adapters Output Signal: HDMI Ports: 1 Performance Audio Specifications: 7.1 surround sound Wide Screen Supported: Yes Supported Resolutions: 1024x 768, 1280x 720 (High-definition 720p), 1920x 1080 (High-definition 1080p), 1920x 1200, 2560x 1440, 2560x 1600, 3840 x 2160 (Ultra HD 4K) @30hz Connector (s) Connector A: 1
- USB (Universal Serial Bus)-C (24 pin) Display Port Alt Mode Male Input Connector B: 1
- HDMI (19 pin) Female Output



...