The Wilesco D14 Steam Engine with a Mirror polished & nickel plated boiler, diameter of 55mm, length 140mm, boiler capacity 250cm, with water gauge glass. Boiler house true to life, coloured & copperplated, with embossed brick type walls, 2 footbridges. Double action reversible brass cylinder with flywheel, spring loaded safety valve, dome whistle, flywheel of 80 mm diameter with grooved pulley, steam jet oiler. All condensed water is collected in a gathering tray below the smoke stack & the chimney smokes just like the original. Finely painted metal. Manufacturer: Wilesco Model: Wilesco Steam Engine (D14) ...

The Wilesco D16 Steam Engine with mirror polished & nickel plated boiler, has a diameter of 2.25", length 5.5", boiler capacity 15in, with water gauge glass. Boiler house with embossed brick type walls, 2 footbridges with ladder. Double action reversible brass cylinder with flywheel, spring loaded safety valve, additional steam whistle with chain, steam regulator, flywheel of 3.25" diameter with grooved pulley, sturdy attractive die cast piston rods, centrifugal governor, steam jet oiler & railing. The condensed water is fed to a tank, hidden behind the boiler house, causing the chimney to smoke realistically. Finely painted metal. Don't forget the Esbit Fuel & the Steam Oil! Base plate 9.75" x 12.25", Height including smoke stack 11.0", Weight 3lbs 10oz. ...

The technology of this engine represents a combination of D20 & D16 & is enhanced by a number of technical refinements. It has a boiler capacity of 530 ccms with a dynamo to supply the lamp with current, water drain cock, spring loaded safety valve, steam whistle with chain, shut off valve, steam oiler & piston rods made from diecast metal. Height including smoke stack 323 mm base,

Dimensions 300 x 350 mm. Manufacturer: Wilesco Model: Steam Traction Engine Kit (D415)

...

The Wilesco D20 Steam Engine has a mirror polished & nickel plated boiler, with a diameter of 2.6", length 6.5", boiler capacity 30.5 in, with water gauge glass, water drain cock. Boiler house true to life, colored, & copperplate, with embossed brick type walls, 2 footbridges with railing & 2 ladders. Double action reversible brass cylinder with flywheel, spring loaded safety valve, additional steam whistle with chain, pressure gauge, steam regulator, flywheel of 3.9" diameter with grooved pulley, sturdy attractive die cast piston rods, centrifugal governor, steam jet oiler & railing. Finely painted metal. New Steam Exhaust! The steam is exhausted through the stack to make it look realistic
- picture is not accurate
- new artwork coming soon. Don't forget the Esbit Fuel & the Steam Oil! Base plate 11.4" x 13.8", Height including smoke stack 12.6", Weight 5lbs 4oz

...

The Wilesco D24 Steam Engine with a brass boiler that is hard soldered & with a capacity of 34.8in with a nickel plated mirror polished brass jacket for enhanced insulation, it has a diameter of 2.8", length 6.5", with water gauge glass, water drain cock. Boiler house true to life, colored & copper plated, with embossed brick type walls, fire door, 2 footbridges with railing, 2 ladders. Double action reversible brass cylinder with flywheel, spring loaded safety valve, additional steam whistle with chain, flywheel of 3.9" diameter with large grooved pulley & sturdy attractive die cast piston rods, centrifugal governor & railing. instrument panel with steam regulator, pressure gauge & steam jet oiler. Finely painted metal. Don't forget the Esbit Fuel & the Steam Oil! Base plate 13.0" x 16.5", Height including smoke stack 15.7", Weight 7lbs 3oz. Manufacturer: Wilesco Model: Steam Engine (D24) ...

With this kit, young steam fans are shown how nostalgic energy is created. For this purpose every kit contains an easy to understand & illustrated instruction pamphlet. Even the least experienced model builder can assemble this kit in a very short time. The assembly contains no soldering work as all components are screwed together. This kit has the same specifications as the factory produced D 6 Steam Engine, & can be used to drive the models from the WILESCO range. Manufacturer: Wilesco Model: Steam Engine (D5) ...

This kit is the best way to begin for anyone who is keen on steam technology The mounted kit has the same specifications as the factory produced D10 Steam Engine & has power enough to run models from the Wilesco range It is easy to assemble even for an inexperienced steam fan using the illustrated instruction pamphlet. Manufacturer: Wilesco Model: Steam Engine (D9) ...

Vertically mounted reversible double-acting brass cylinder, with flywheel, flexible plastic pipe to connect the boiler & engine assembly. Brass universal coupling. Operating time about 15 minutes per fuel charge. Manufacturer: Wilesco Model: Steam Engine
- Marine (D52)
...

The Wilesco D48 2 Cylinder Marine Steam Engine Gas has a polished & nickelplated boiler, diameter of 55mm, length 140mm, boiler capacity 250cm, with water gauge glass, spring loaded safety valve, filler cap. Boiler heated with butane gas. Removable nickelplated gas holder with filler & regulating valve, suitable for all conventional filling devices. Gas consumption about 20g, flywheel with a diameter of 50 mm, fully reversible (allowing forward & reverse), self starting automatic drive. Installation of an universal coupling with a diameter of 4mm is possible on either side of the drive shaft. Fully reversible steam regulator, infinitely variable, RC-connection can be joined to the reversing lever. Don't forget the Esbit Fuel & the Steam Oil! Weight (complete) 1, 0kg (1, 3kg with filled boiler). Size of base plate boiler & gas holder: Length 180mm, width 110mm, height 140mm, weight 0, 6kg. Aggregate: Length 125mm, width 90mm, height 100mm, weight 0, 4kg. Manufacturer: Wilesco Model: Steam Engine
- Marine Twin Cylinder (D48)
...

The Wilesco Steam Engine- Oscillating has a Mirror polished & nickelplated boiler, with a diameter of 45mm, length 100mm, boiler capacity 135cm with water gauge glass. Boiler house, true to life, coloured & copperplated, with embossed brick type walls. Oscillating brass cylinder & piston, spring loaded safety valve, dome whistle, flywheel of 70mm diameter with grooved pulley. Finely painted metal. Base plate 140 x 200mm, Height including smoke stack 220mm, Weight 0, 8kg, Special gift box 210 x 150 x 150mm Manufacturer: Wilesco Model: Steam Engine
- Oscillating (D6)
...