More From Contributor

£289.99
Team Associated's popular Nitro TC3 Ready-to-Run, winner of Radio Control Car Action's 2003 " Reader's Choice" award, has been updated with even more of the features you've been asking for. We upgraded to a more powerful. 15 size engine, added a new design " Sure Shift" 2-speed transmission for better acceleration & higher top speed, & redesigned the rear suspension components for more strength & tuneability. We felt the Nitro TC3 Plus should look as good as it runs, so we included chrome 8-spoke wheels, & topped it off with a Pro-Line " Crowd Pleazer" body with new, modern sport-compact style graphics. To make the Nitro TC3 Plus an even better value, we added a free quick-fill Nitro fuel filler bottle & a rechargeable glow igniter right in the box! Of course, the NTC3 Plus is fully upgradeable with our extensive line of Factory Team performance components. & no other RC manufacturer beats Team Associated's widespread replacement parts availability. Product
Features: Side-exhaust manifold & pipe. Pre-glued high-grip treaded racing tires with foam inserts. Associated Electrics radio system with Steering trim, Throttle trim, Throttle ATV high, Throttle ATV low, Steering dual rate. Ball bearings. Protective front bumper, composite shocks, adjustable body mounts, quick-fill fuel tank. Pivot ball type suspension with easily adjustable caster, camber & toe-in. Interchangeable front & rear hub carriers.
...
Archived Product
£189.99
Team Associated's RC10B4 has been proven as a world-class competition buggy with four consecutive IFMAR Worlds Championships & five ROAR National Championships. Equally important are the countless club & regional events that the B4 continues to win. Built on the 4-time World Champion & 5-time National Champion RC10B4 platform.XP3-SS 2.4 GHz 3-channel radio system with SHV1504 MG metal gear servo.XP SC200 electronic speed control with Li Po cutoff, forward & reverse with reverse lock out. Reedy 17-turn motor.2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable slipper clutch, & rubber sealed ball bearings. Molded composite low-CG chassis with set-screw antenna tube lock. Blue aluminum shock bodies with molded pre-load clips. Battery strap with twist-lock thumb knobs etc. Spec Check: Length: 377mm
Width: 250mm Track: 214mm Weight: 1530g Wheelbase: 288mm Internal Gear Ratio: 2.6:1 Drive: 2WD
...
Archived Product
£204.99
Based on the 7-time National Champion RC10T4, the brushed RC10T4.1 is a fully assembled truck that features many of the components from the RC10T4 Team kit, while incorporating a totally new 2.4 GHz XP3-SS 3-Channel radio system & SHV1504 MG metal gear steering servo. Power is supplied by a 17-turn Reedy motor while the XP SC200 electronic speed control with Li Po cutoff provides smooth throttle control. A sealed gear differential improves reliability & allows fine tuning for different track conditions. Designed by the winningest name in R/C, the RC10T4.1 can be in addition upgraded using a full line of Factory Team T4 hopups, as well as Reedy & LRP performance parts. Spec Check: Length: 390mm
Width: 316mm Track: 270mm Weight: 1756g Wheelbase: 288mm Internal Gear Ratio: 2.6:1 Drive: 2WD Please
...
Archived Product
£148.99
The RC18B packs big-time 4WD buggy performance into a mini-sized package! Based on the original RC18T platform, the 18B features a mini-buggy body & wing, narrow-spoke wheels in front & wide-spoke wheels in the rear for superior handling & traction. The Team Associated RC18B 4WD Micro Buggy is powered by an inline-mounted " Super 370" high-performance motor, bolted to an aluminum motor mount with several mounting holes to fit most aftermarket 1:18 scale hop-up motors. The 18B transfers all the power to the ground with its efficient shaft-drive, 4WD powertrain featuring adjustable ball differentials front & rear. The 18B suspension absorbs all of the imperfections of the road with oil-filled shocks for smooth & consistent dampening. The four lower suspension arms are symmetrical & work with the molded upper suspension links to ensure that the 18B's suspension geometry is optimized right out of the box. Team Associated’s "XP" series electronics in the 18B are completely modular, allowing easy access to the receiver, steering servo, & the "XPS" electronic speed control with reverse. If you’re looking for the ultimate mini-4WD buggy with big performance that will whip the competition, look no further. Leave them in the dust with Team Associated’s RC18B. AS20105 RC18B 4WD RTR Buggy ...
Archived Product
£148.99
The Associated RC18MT Mini Monster Truck is monster truck performance in a mini-sized package! Based on the revolutionary RC18T platform, the RC18MT features a mini-MGT flag body, chrome wheels & monster truck tires with AE logos in the tread. The 18MT is powered by an inline-mounted “ Super 370” high-performance motor, bolted to an aluminum motor mount with several mounting holes to fit most aftermarket 1/18th scale hop-up motors. The RC18MT transfers all the power to the ground with its efficient shaft-drive, 4WD powertrain featuring adjustable ball differentials front & rear. The RC18MT suspension absorbs all of the imperfections of the road with oil-filled shocks for smooth & consistent dampening. The four lower suspension arms are symmetrical & work with the molded upper suspension links to ensure that the 18MT’s suspension geometry is optimized from the start. Team Associated’s “XP” series electronics installed in the 18MT are completely modular, allowing easy access to the receiver, steering servo, & the new “XPS” electronic speed control with reverse. A 10-hour wall charger is included. If you want instant gratification & prefer something a little smaller & easier to manage, this is the truck for you! Big fun comes in small packages, & the Team Associated’s RC18MT comes ready to run & is a highly enjoyable RC kit to own.AS20110 RC18MT 1/18th 4WD Mini Monster Truck RTR ...
Archived Product

Team Associated RC18T RTR 1/18th 4WD Micro Racing Truck

The 18T’s racing heritage is apparent in many features of the truck, including its efficient shaft-drive, 4WD powertrain featuring adjustable ball differentials front and rear. The Associated RC18T Racing Truck is powered by an inline-mounted 370 high-performance motor, bolted to an aluminum motor mount with several mounting holes to fit most any aftermarket 1:18 scale hop-up motor. A high-capacity 1100mAh nickel-metal hydride (Ni-MH) battery pack is included with the 18T, as well as a convenient charger. The 18T comes standard with a 55 tooth spur gear and a metal 14 tooth pinion with set screw. However, the truck will accommodate larger spur gears (up to 60 teeth) by changing the small gear cover on the underside of the chassis.All the Team Associated “XP” series electronics
in the 18T are completely modular, allowing independent replacement of the receiver, steering servo, and the new “XPS” micro speed control with reverse, which provides smooth throttle control and will handle most aftermarket hop-up motors.In the suspension department, the 18T distinguishes itself from the pack with real oil-filled shocks for smooth, consistent damping. Each of the four lower suspension arms are identical and interchangeable, front to back and right to left. Molded upper suspension links ensure that the 18T’s suspension is correctly set from the start. However, steel or titanium turnbuckle kits will be offered for those racers wanting more adjustability. The 18T also features four high-traction “Mini-Pin” racing compound tires with foam inserts mounted on
racing-style dish wheels.Of course, the 18T will be supported by a full line of Associated’s “Factory Team” performance parts and accessories, including machined aluminum suspension arms, shock towers, and shock bodies. In addition, Reedy will soon be offering more powerful motors and batteries to fit the 18T and other Mini-sized vehicles. If you’re looking for the next big thing in small trucks, you’ve found it…Team Associated’s RC18T RTR 1/18th 4WD Micro Racing Truck.Spec CheckLength: 218mm Width: 182mm Weight: 540g Wheelbase: 154mm Internal: Gear Ratio 2.5:1 Drive: 4WD shaft drive AS20100 RC18T 1/18th 4WD Mini Truck RTR
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£148.99

Product Description

The 18T’s racing heritage is apparent in many features of the truck, including its efficient shaft-drive, 4WD powertrain featuring adjustable ball differentials front & rear. The Associated RC18T Racing Truck is powered by an inline-mounted 370 high-performance motor, bolted to an aluminum motor mount with several mounting holes to fit most any aftermarket 1:18 scale hop-up motor. A high-capacity 1100m Ah nickel-metal hydride (Ni-MH) battery pack is included with the 18T, as well as a convenient charger. The 18T comes standard with a 55 tooth spur gear & a metal 14 tooth pinion with set screw. However, the truck will accommodate larger spur gears (up to 60 teeth) by changing the small gear cover on the underside of the chassis. All the Team Associated “XP” series electronics in the 18T are completely modular, allowing independent replacement of the receiver, steering servo, & the new “XPS” micro speed control with reverse, which provides smooth throttle control & will handle most aftermarket hop-up motors. In the suspension department, the 18T distinguishes itself from the pack with real oil-filled shocks for smooth, consistent damping. Each of the four lower suspension arms are identical & interchangeable, front to back & right to left. Molded upper suspension links ensure that the 18T’s suspension is correctly set from the start. However, steel or titanium turnbuckle kits will be offered for those racers wanting more adjustability. The 18T also features four high-traction “ Mini-Pin” racing compound tires with foam inserts mounted on racing-style dish wheels. Of course, the 18T will be supported by a full line of Associated’s “ Factory Team” performance parts & accessories, including machined aluminum suspension arms, shock towers, & shock bodies. In addition, Reedy will soon be offering more powerful motors & batteries to fit the 18T & other Mini-sized vehicles. If you’re looking for the next big thing in small trucks, you’ve found it… Team Associated’s RC18T RTR 1/18th 4WD Micro Racing Truck. Spec Check Length: 218mm

Width:
182mm Weight: 540g Wheelbase: 154mm Internal: Gear Ratio 2.5:1 Drive: 4WD shaft drive AS20100 RC18T 1/18th 4WD Mini Truck RTR

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Nickel - A corrosion resistant conductive metal
Motor - A evice that converts electricity into motion
Steel - An alloy made predominately of Iron combined with <2% carbon
Battery - A device used for the storage of electricity
Foam - A stubstance formed by trapping air in a solid or liquid
Batteries - Portable Power sources in cell form
Oil - A hydrophobic liquid with high carbon and hydrogen content. Has many variations including; cooking oils, petrochemical oils, essential oils.
team - A group of people or animals linked by a common purpose.
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
speed - A measurement of how fast an object travels between two points
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Small - something that takes up less space than normal.
Adjustable - Something that can be changed or slightly modified to fit.
Width - The measurement of something from one side to the other.
Adjustable - Something that can be changed in order to fit better.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Convenient - Something that suits and fits well to other activities.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu