Tamiya 1:25 Chieftain (56603) The Tamiya British Chieftain MBT radio control tank in 1/25 scale is rereleased in celebration of the 40th Year Anniversary of Military Miniatures. This is a rerelease of the radio controlled version of the 1/25 British Chieftain MBT which was first released in 1967. About the Chieftain Tank: The Chieftain tank first went into production in 1963 & had an intimidating 55 caliber 120mm rifle tank gun which was built for the purpose of knocking out Soviet tanks from a range of 4000m. The Chieftain's defensive abilities were also impressive with 150mm thick front armor plating. It was powered by a Leyland 19000cc engine which pumped out 750hp for an on-road top speed of 48km/h. From the first Chieftain Mk.1 to the last Mk.12, Approx. 900 units were manufactured. About the Chieftain MBT Model This is an assembly R/C kit version on the prototype Chieftain tank. The Chieftains unique balanced form has been accurately reproduced.4-channel transmitter included. Forward/reverse, sharp turning, pivot turning, gun turret rotation, & gun barrel movement can be controlled Pre-assembled belt-type tracks. Compact gearboxes & motors drive the tank. One compact unit controls both turret rotation & gun elevation. The gearboxes & the all-in-one turret rotation & gun elevation unit are pre-assembled. Two standard buttons are also equipped for extra channel use. Uses four AAA alkaline batteries for the tank & one (9V) alkaline battery (all sold separately) for transmitter. Manufacturer: Tamiya Model: Tamiya 1/25 Chieftain (56603 ) ...

The Supermarine Spitfire is one of the most widely recognized fighters of WWII. Designed by R.J Mitchell, the Spitfire is known for its exploits during the Battle of Britain. Throughout the war, the Spitfire's engine technology evolved to compete with the newer Axis aircrafts. As a result, there are numerous variants of the Spitfire, which served with distinction in the RAF as well as in the air forces of other countries. The Spitfire Mk. IX was produced as a result of the German Fw 190A fighter, which were superior to the earlier production Spitfire Mk. V. The new Spitfire Mk. IX was equipped with a Merlin Series 60/70 engine & two-stage supercharger. This enhanced the performance of the aircraft & allowed it to match the Fw 190A in battle. The production of the Spitfire Mk. IX continued until the end of WWII. The most common Spitfire featured the "C" universal wing, which could be equipped with four 20mm cannons or two 20mm cannons & four 7.7mm machine guns. Some of the Spitfires were also fitted with bomb racks to allow the aircraft to be used as a fighter-bomber. ...

Length: 365mm,

Width: 170mm,

Height: 142mm Wheelbase: 225mm (Middle wheelbase). The



...

Tamiya 1:12th Ajinomoto Honda NSR 250 1990 Bike (14110) The Tamiya 1/12 Ajinomoto Honda NSR250 1990 is a plastic model kit in the Tamiya 1/12 Motorcycle Plastic Model Kits range.
Features: High-quality 1/12 scale assembly model kit of the Ajinomoto Honda NSR250 90. Cowlings are made from clear plastic material, so modelers can choose to leave them unpainted to enable viewing of interior details. Small precision-made screws are used to attach/detach the cowlings, engine, & wheels. Rear suspension features metal coil spring for enhanced realism. Solid synthetic rubber tires provide an authentic racing flavor. Beautiful Cartograf decals, including special markings for the perforated side cowlings, depict bike ridden by Masahiro Shimizu to 2nd place at the 1990 British GP. Manufacturer: Tamiya Model: 14110 Ajinomoto Honda NSR250 1990
...

Tamiya Avante R/C Racing Buggy (58489) PRE SALE In March 1988, Tamiya released an electric R/C 4WD racing buggy called the " Avante" & it has since become a special machine in Tamiya's R/C history. The machine featured a unique shaft-driven 4WD system which was taken from Tamiya's first 4WD R/C buggy, the Hotshot. It also featured a highly sophisticated design including a FRP double-deck chassis layout, longitudinal motor & battery positions, & a formula-type body with chassis fairing. It was equipped with innovative components such as a compact gearbox with 3 small planetary gears, a centre diff to increase stability, a fully adjustable suspension, & cam-lock wheel caps. The Avante was a distinctive R/C machine which featured an innovative design. After 20 years, some of the Avante's mechanisms have become standard features on modern R/C cars. The ultimate pure racing buggy returns in 2011. Tamiya has given the Avante (2011) the special re-release treatment just like other re-released buggies such as the Buggy Champ & the Hotshot. Specification:- * Main frame material has been changed from FRP to carbon fibre. Original FRP upper/lower decks have been replaced with 2.0mm thick carbon fibre decks to further increase chassis strength & rigidity. Chassis layout is optimised for installing modern R/C equipment * Carbon Fibre Rear Damper Stay Rear damper stay is thicker than the original & its material has also been changed to carbon fibre. Left & right stays are connected to further increase rigidity * Assembly Universal Shafts WO universal shafts are used for both front & rear to reduce friction loss * Easier Damper Maintenance The gold-coloured oil damper cylinders feature bottom caps for easier maintenance such as replacing o-rings * Durable Polycarbonate Body Shell The body, wing, & chassis fairing have been made with polycarbonate for superb off-road durability * Wheel Axle/ Clamp Type Wheel Hubs Wheel axles have been changed to standard pin-secured type. In conjunction with aluminium wheel hubs, secure wheel attachment is possible. The hex wheel hubs enable attachment of off-road wheels such as Item 53880 Large Dish Wheels (4WD/ Front, 62/25) & Item 53881 Large Dish Wheels (Rear, 62/35) in addition to the original cam-lock type wheels * The original die-cast front knuckles have been replaced with duralumin knuckles to further increase strength & durability. New knuckles feature the same shape as the original * Compatible with a wide range of battery packs. The Avante (2011) is compatible with a wide range of Tamiya battery products such as Ni-Cd, high-capacity Ni-MH, & lightweight LF battery packs * The Avante is compatible with all Tamiya R/C systems including the 2.4 G Hz systems * The Original Packaging is also revived! The package for this re-release model comes with the same design &

Dimensions as the original Avante. In addition, ju

...

Tamiya Bell X-1 Mach Buster Model Kit (60740) The Tamiya 1/72 US Bell X-1 Mach Buster is a plastic model kit in the Tamiya 1/72 Aircraft Plastic Model Kits. This plastic Aircraft kit requires paint & glue to complete. Manufacturer: Tamiya Model: 60740 US Bell X-1 Mach Buster Scale: 1/72 ...

Tamiya Bimota Tesi 1D 906SR Model Kit (14062) The Tamiya Bimota Tesi 1D 906SR Model Kit in 1/12 scale from the plastic motorcycle model range accurately recreates the real life Italian sports motorcycle. This plastic motorcycle kit requires paint & glue to complete. About the Bimota Tesi 1D 906SR: Bimota is an Italian motorcycle manufacturer known for its unique, customized designs. Their Tesi 1D 906SR from 1991 was one such machine & it was notable for having a hub-center steering front suspension system rather than the more orthodox forks. This type of system separates the steering, braking, & suspension functions, enabling greater stability & steering consistency since the affect that the suspension movement & braking has on the steering is minimized. Featuring a powerful Ducati-built liquid-cooled L-twin engine & large diameter Brembo brakes, it also boasted very impressive performance figures. Only a small number were produced, so it was not only an eccentric, but also an exclusive motorcycle. About Tamiya’s Kit:1/12 scale assembly kit model of the Bimota Tesi 1D 906SR. Distinctive hub-center steering front suspension features die-cast hub shafts, metal link rods, & metal coil springs. Steerablefront wheel. Seat is depicted with a special foam material for enhanced realism. Frame details, including the L-twin engine, are precisely reproduced. Comes with high-quality Cartograf decals. Manufacturer: Tamiya Model: 14062 Bimota Tesi 1D 906SR Model Kit Scale: 1/12 ...

The Blackfoot-Xtreme is equipped with a reinforced polycarbonate monocoque frame chassis. This arrangement allows easy access & maintenance of gearbox without disassembly. With the battery located in the middle of the chassis, the Blackfoot-Xtreme is perfectly balanced for rough riding. The centrally positioned servo ensures the equal alignment of the steering tie rods, improving control. The four-wheel double wishbone suspension offers flexible handling over all road conditions. This is a Big wheel off road Pick up truck kit to be built from kit form following simple step by step instructions. Build process is fun, educational & ensures that servicing & repairs may be carried out with ease. Massive ground clearance for off road performance. Heavy duty independent suspension with coil sprung shock absorbers. 2 Wheel drive transmission. Pre assembled gear box with differential. Powerful electric motor & electronic speed control. Tyres pre mounted on wheels. Giant paddle grip off road semi pneumatic tyres. Tough impact resistant plastic body shell. About the model Pre-assembled gearbox for quick & easy assembly Gearbox can be removed for maintenance without disassembling chassis Heavy parts located in centre of chassis for perfect balance 4-wheel double wishbone suspension featuring 4 friction dampers Injection moulded body Electronic Speed Control Total length: 445mm, Total

Width: 310mm, Total

Height: 267mm. Chassis

Material: Polycarbonate Transmission Type: 2WD
Includes: one Type 540 motor. Tire Diameter F/R: Both 130mm Required Items (Sold Separately)R/C Unit: Acoms 2-channel R/C system Battery: 7.2V Racing Pack or equivalent & Charger






...

The highly detailed polycarbonate body accurately captures the powerful form of the BMW M3 GT2. Side mirrors, rear wing, & metal plated light cases are precisely reproduced. Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control & handling. Accurately reproduced wheels & tires with tread pattern are included. Each front light case has one 5mm & one 3mm LED Light installation points. Each rear light case has one 5mm & two 3mm LED Light installation points. Comes with LED Light Unit TLU-01 (Item 53909) & 2 white & 2 red 5mm LED lights (Total 4) are included. * It is possible to assemble with the separately available LED Light Control Unit TLU-02 which allows up to 16 pairs of LEDs (total 32 LEDs) to be controlled.TEU-104BK ESC & type 540 motor included. 2-channel R/C system, battery pack & charger are separately required. Manufacturer: Tamiya Model / Part No.: 58449 ...