About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Stuart Models Twin
Oscillator Set Of
Castings (34-50-71306)
£85.99
The Twin Oscillator is a new model developed from the recently revived S.T. Oscillator. The main advantage of the Twin Oscillator over the single apart from the greater power, is that the engine comes complete with reverse gear. This double acting engine has proven itself to be very powerful for it’s size in our bench tests & has already attracted a great deal of attention at the exhibitions we have shown it. Engine Description: Stuart Twin Oscillator Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications:
Height: 2 7/16 inches. Flywheel: 1 inch diameter. Bore: 7/16 inches. Stroke: 7/16 inches. Contents: Brass: Standard, cylinders, reversing lever, flywheel, top & bottom cylinder covers, pistons, big ends, collars & plugs. Steel: Crankshaft, crankpins, piston rods. Sundries: Detailed drawings, cylinder laggings, gasket material, “O” rings, fixings pack. Manufacturer: Stuart Models Model / Part No: Twin Oscillator Set of Castings (34-50-71306)
...
Archived Product
image missing
Stuart Models Twin
Victoria Machined Kits
(34-50-71426)
£1794.00
The Twin Victoria is essentially two Stuart Victorias running side by side. This makes for a very impressive model which will be the center piece of any collection. As with all Stuart Models machined kits it is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart Twin Victoria Fully Machined Kit Specifications: Length: 15 1/2 Inches. Flywheel Diameter: 7 Inches Diameter. Bore: 1 Inch Diameter. Stroke: 2 Inches. Contents: Cast Iron: Baseplates, cranks, cylinders, valve chests & covers, front & rear cylinder covers, pistons, flywheel. Brass: Slide valves, eccentric straps, valve operating blocks, glands, conrod bushes, crossheads, crankshaft bearings Steel: Crankshaft, connecting rods, eccentric sheaves, eccentric rods, clevises, crankpins, piston & valve rods, all materials for valve gear & crosshead guides. Sundries: Detailed drawings, gaskets, viton O rings, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Twin Victoria Machined Kits (34-50-71426) ...
Archived Product
image missing
Stuart Models Twin
Victoria Ready To Run
Models (34-50-71427)
£2805.00
The Twin Victoria is essentially two Stuart Victorias running side by side. This makes for a very impressive model which will be the center piece of any collection. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Stuart Twin Victoria Ready to run Model. Specifications: Length: 15 1/2 Inches. Flywheel: 7 Inch Diameter. Bore: 1 Inch. Stroke: 2 Inches. Contents: Cast Iron: Baseplates, cranks, cylinders, valve chests & covers, front & rear cylinder covers, pistons, flywheel. Brass: Slide valves, eccentric straps, valve operating blocks, glands, conrod bushes, crossheads, crankshaft bearings. Steel: Crankshaft, connecting rods, eccentric sheaves, eccentric rods, clevises, crankpins, piston & valve rods, all materials for valve gear & crosshead guides. Sundries: Detailed drawings, gaskets, viton O rings, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Twin Victoria Ready to Run Models (34-50-71427) ...
Archived Product
image missing
Stuart Models Twin
Victoria Unmachined
Set Of
Castings (34-50-71425)
£468.75
The Twin Victoria is essentially two Stuart Victorias running side by side. This makes for a very impressive model which will be the center piece of any collection. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart Twin Victoria Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 15 1/2 Inches. Flywheel: 7 Inches Diameter. Cylinder Bore: 1 Inch Diameter. Cylinder Stroke: 2 Inches. Contents: Cast Iron: Baseplates, cranks, cylinders, valve chests & covers, front & rear cylinder covers, pistons, flywheel. Brass: Brass Slide valves, eccentric straps, valve operating blocks, glands, conrod bushes, crossheads, crankshaft bearings. Steel: Crankshaft, connecting rods, eccentric sheaves, eccentric rods, clevises, crankpins, piston & valve rods, all materials for valve gear & crosshead guides. Sundries: Detailed drawings, gaskets, viton "O" rings, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Twin Victoria Unmachined Set of Castings (34-50-71425) ...
Archived Product
image missing
Stuart Models
Victoria Machined Kits
(34-50-71420)
£1053.00
The Stuart Victoria follows closely the design of low pressure horizontal engines used throughout the nineteenth century, to provide power in workshops & factories. The large flywheel allows the engine to run smoothly at low speeds where the long elegant stroke can be appreciated. As with all Stuart Models machined kits it is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart Victoria Fully Machined Kit. Specifications: Length: 15 1/2 Inches. Flywheel Diameter: 7 Inches Diameter. Bore: 1 Inch Diameter. Stroke: 2 Inches. Contents: Cast Iron: Baseplate, pedestal, pulley, crank, cylinder, valve chest & cover, front & rear cylinder covers, piston, flywheel. Brass: Slide valve, eccentric strap, valve operating block, glands, conrod bush, crossheads, crankshaft bearings. Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, piston & valve rods, all materials for valve gear & crosshead guides. Sundries: Detailed drawings, gaskets, viton O ring, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Victoria Machined Kits (34-50-71420) ...
Archived Product
image missing
Stuart Models
Victoria Unmachined
Set Of
Castings (34-50-71419)
£251.99
The Stuart Victoria follows closely the design of low pressure horizontal engines used throughout the nineteenth century, to provide power in workshops & factories. The large flywheel allows the engine to run smoothly at low speeds where the long elegant stroke can be appreciated. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart Victoria Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 15 1/2 Inches. Flywheel Diameter: 7 Inches. Cylinder Bore: 1 Inch Diameter. Cylinder Stroke: 2 Inches. Contents: Cast Iron: Baseplate, pedestal, pulley, crank, cylinder, valve chest & cover, front & rear cylinder covers, piston, flywheel. Brass: Slide valve, eccentric strap, valve operating block, glands, conrod bush, crossheads, crankshaft bearings. Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, piston & valve rods, all materials for valve gear & crosshead guides. Sundries: Detailed drawings, gaskets, viton O ring, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Victoria Unmachined Set of Castings (34-50-71419) ...
Archived Product
Stuart Yacht MM1004
Stuart Yacht MM1004
£9.95
Stuart Yacht MM1004 Designer: I J Browne Star Rating: *** An attractive, typical Stuart period yacht of circa 1670 drawn to a hull length of approx. 12in (14in overall). Fore & aft rig (two headsails & gaff main) plus one square topsail. Heavily decorated topsides & stem. No model construction shown. Featured in " The Model Boats Magazine" April 1968 ...
Archived Product
image missing
Stuarts Models 10H
Machined Kits
(34-50-71196)
£403.00
The Stuart 10H is a development from the popular 10V Engine. It is more than capable of 'doing work' & can easily power a small dynamo or pump. This small horizontal engine offers both power when run at high speed & visual interest when operated at slow crankshaft speeds. Engine Description: Stuart 10H Fully Machined Kit Specifications: Length: 6 Inches. Flywheel Diameter: 3 Inch Diameter. Bore: 3/4 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinder, valve chest & cover, top & bottom cylinder covers, flywheel. Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuarts Models Model / Part No: 10H Machined Kits (34-50-71196) ...
Archived Product
image missing
Student Art Kit
£159.99
This kit contains everything you need to get started in airbrushing Art & Graphics, including a light-duty compressor, a Premi Air G35 airbrush with 0.35mm nozzle, Com-Art paints, airbrush cleaner, stencil & video. Please click on the contents of the set listed below for further details of each item. The baby compressor is suitable for occasional use
- for about half an hour, two to three times per day.
...
Archived Product

Stuart Models Victoria Ready To Run Models (34-50-71421)

The Stuart Victoria follows closely the design of low pressure horizontal engines used throughout the nineteenth century, to provide power in workshops and factories. The large flywheel allows the engine to run smoothly at low speeds where the long elegant stroke can be appreciated. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Stuart Victoria Ready to Run Engine. Specifications: Length: 15 1/2 Inches.Flywheel: 7 Inch Diameter.Bore: 1 Inch.Stroke: 2 Inches. Contents:Cast Iron: Baseplate, pedestal, pulley, crank, cylinder, valve chest and cover, front and rear cylinder covers, piston, flywheel.Brass: Slide valve, eccentric strap, valve operating block, glands, conrod bush,
crossheads, crankshaft bearings.Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, piston and valve rods, all materials for valve gear and crosshead guides.Sundries: Detailed drawings, gaskets, viton O ring, gland packing, fixings pack. Manufacturer: Stuart ModelsModel / Part No: Victoria Ready to Run Models (34-50-71421)
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£1667.00
other vehicles Toy Vehicles & Aircraft > Other Vehicles
Description Reviews / Comments Add New

Product Description

The Stuart Victoria follows closely the design of low pressure horizontal engines used throughout the nineteenth century, to provide power in workshops & factories. The large flywheel allows the engine to run smoothly at low speeds where the long elegant stroke can be appreciated. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Stuart Victoria Ready to Run Engine. Specifications: Length: 15 1/2 Inches. Flywheel: 7 Inch Diameter. Bore: 1 Inch. Stroke: 2 Inches. Contents: Cast Iron: Baseplate, pedestal, pulley, crank, cylinder, valve chest & cover, front & rear cylinder covers, piston, flywheel. Brass: Slide valve, eccentric strap, valve operating block, glands, conrod bush, crossheads, crankshaft bearings. Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, piston & valve rods, all materials for valve gear & crosshead guides. Sundries: Detailed drawings, gaskets, viton O ring, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Victoria Ready to Run Models (34-50-71421)

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Brass - A copper and Zinc Alloy
Diameter - A measurement across a circle passing through the middle
Engine - A machine designed to convert fuel into motion
Steel - An alloy made predominately of Iron combined with <2% carbon
Inch - Equivalent to approximately 2.5cm
Hand - A part of the body at the end of the arm
Hand - A pointer which indicates time on a clock face
iron - An electrical deviced used for removing creases from fabrics
iron - A chemical element (FE). The most common element on earth
Large - something that takes up more space than normal.
Certificate - A document proving the truth of facts, for example a birth certificate.
Bearings - A direction or a way someone moves around.
Valve - An opening and closing to control the movement of fluid through pipes.
Design - A drawing or styles that shows the look and functionality of something before its made.
Fixings - An action of sticking an item to another surface.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu