A striking model of the F-5E, designed by Starmax to offer you stunning flight performance combined with quick & easy assembly. ...

The real Northrop F-5E Tiger II are part of a family of widely used light supersonic fighter aircraft, designed & built by Northrop in the United States, beginning in 1960s. Hundreds remain in service in air forces around the world. The F-5E " Tiger II" was a greatly enhanced version of the earlier F-5A " Freedom Fighter". Redesigned as a highly maneuverable, lightweight & inexpensive air superiority fighter, the E featured an air-to-air fire control radar system & a lead computing gun sight. More powerful J85 engines required the fuselage to be both widened & lengthened. The forward wing root was redesigned to give the " Tiger II" wing its characteristic triple delta shape. This excellent model is based on the US Navy desert camo finish. The real F-5E Tiger IIThis F-5E is one of the highest spec & quickest jets on the market. It is a massive 1.3m in length & is fitted with a 70mm EDF. Extra power & speed is produced by the big 14.8V, 2200mah Li Po battery & 40A brushless setup. As well as extra power & speed this jet also features an automatic landing gear system & turning front wheel. To allow this the set

Includes:: a 5ch transmitter & eight servos. It's a highly maneuverable model that can easily perform inverted flight, loops & rolls etc. The model comes pre-painted with everything you need included apart from the normal AA batteries for the transmitter. The model is almost ready to fly out of the box with only very minor assembly required such as attaching the wings. Everything you need to complete is included in the box. Included is a 5ch 1000m range transmitter, electronic speed controller, ducted fan with electric brushless motor & 8 electric servos all pre-installed. The 5ch transmitter gives full 3D control of the aileron, elevator, rudder, throttle & retracts. The 70mm ducted fan system with the brushless motors & li-po battery gives enormous power pushing the jet to crazy speeds. The high power allows full aerobatic characteristics & inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, & spins are all possible. The attention to detail from Starmax who are the leading rc jet manufacturers gives the jet a nice realistic appearance. The jet can take off from the ground or can be hand launched. If you are not ready to be flying at high speeds then you can also fly the plane very slowly while you get used to it without any problems. The jet is made from shock resistant EPS foam with reinforced fuselage & strong wings. Should you need any spare parts though they are all available from our site. This plane is a lot of fun & you will certainly enjoy flying this fantastic model. Specification: Wingspan: 760mm Length: 1312mm Flying Weight: 900g Wing area: 12.44dm 2 Wing Load: 72.3g/dm 2 Radio System: 5 Ch Tx & 6 Ch Rx Servos: 8 x 9 gram servos Fan: 70mm Ducted fan Motor: Powerful 2836 out runner brushless ESC: 40A ESC 5A UBECBattery: 2200 Mah, 14.8 V Radio Control Range: 3000 feet (1000m)
Features:70mm EDFUpgraded 14.8V battery Working retracts 5 Channel Digital Proportional Full aerobatic characteristics Brushless setup Ready to fly in just minutes Super tough, lightweight airframe Perfect appearance & emulation Take off from ground or hand launched Excellent flight performance Stable inverted flight Made by Starmax
- industry leaders in qualit



...

The real Northrop F-5E Tiger II are part of a family of widely used light supersonic fighter aircraft, designed & built by Northrop in the United States, beginning in 1960s. Hundreds remain in service in air forces around the world. The F-5E " Tiger II" was a greatly enhanced version of the earlier F-5A " Freedom Fighter". Redesigned as a highly maneuverable, lightweight & inexpensive air superiority fighter, the E featured an air-to-air fire control radar system & a lead computing gun sight. More powerful J85 engines required the fuselage to be both widened & lengthened. The forward wing root was redesigned to give the " Tiger II" wing its characteristic triple delta shape. The unique scheme used on this model is a perfect replica of the special upgraded Brazilian F-5E shown below which was designed to celebrate 30 years of service of the F-5E Tiger in the Brazilian Air Force.1-5/8" wingspan, 34-7/8" long, 125 sq. in. wing area, 18-1/2 oz. flying weight. Tough EPO foam construction makes a more durable airframe, less prone to dings & dents. The Jet comes with all the major components pre-installed & ready for final assembly. All you need to do to complete is glue in place the vertical fin, rockets & the EPO nose cone. The 64mm fan is installed with a smooth-running out runner motor & a 30 amp speed control. The 4 servos (2-aileron, 2-elevator) are pre-installed & pre-connected to the flying surfaces. It just doesn't get much easier than this. Charge the 1300 m Ah lipo battery with the included lipo balance charger, install 8-AA batteries (not included) in the transmitter & get ready to go fly fast. Flight battery access is located under the canopy, making a quick change easy to do. The jet comes with removable landing gear with a turning nose wheel. It can be flown with or without the gear. If you don't have a smooth runway, hand launching is easy to do & belly landings are a breeze. The high visibility color scheme really helps with maintaining orientation with this fast jet. Small-yes, twitchy-no; the F-5E has great speed & really grooves in the air. The jet is suitable for intermediate to advanced pilots. Included is a 1000m range transmitter, electronic speed controller, ducted fan with electric brushless motor & 5 electric servos all pre-installed. The 4ch transmitter gives full 3D control of the aileron, elevator, rudder & throttle. The ducted fan system with the brushless motors & li-po battery gives enormous power pushing the jet to crazy speeds. The high power allows full aerobatic characteristics & inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, & spins are all possible. The attention to detail from Starmax who are the leading rc jet manufacturers gives the jet a nice realistic appearance. The jet can take off from the ground or can be hand launched. If you are not ready to be flying at high speeds then you can also fly the plane very slowly while you get used to it without any problems. The jet is made from shock resistant EPS foam with reinforced fuselage & strong wings. Should you need any spare parts though they are all available from our site. This plane is a lot of fun & you will certainly enjoy flying this fantastic model. Specifications: Wingspan: 532mm Length: 939mm Flying Weight: 500g Wing area: 7dm 2 Wing Load: 70g/dm 2 Radio System: 4 Ch Tx & 6 Ch Rx Servos: 5 x 9g servos Fan: 64MM Ducted Motor: Powerful 14L in-runner brushless ESC: 25A ESC Battery: 1300 Mah, 11.1V Li Po Range: 3000 feet (1000m) ...

Comes complete with working suspension & retracts! Product Specification: Radio System: 5 Ch Tx & 6 Ch Rx (Req.), 8 Servos (Inc.) Electric Motor: 3670 Brushless Inrunner Li Po: 6s (22.2V) 3700 m Ah (Rec.) S/C Rec: 90A ESC (Inc.), 5A UBEC (Inc.) Wing Loading: 90g/dm Wing Area: 22dm Length: 1430mm Weight: 2000g Wingspan: 1041mm Manufacturer: Ripmax Model / Part No: Starmax F/A-18C Hornet 90 EDF ARTF (A-STAD15C) ...

Star Max F/A-18E EPO (Grey) EDF ARTF A-STAX01F The menacing lines of the F/A-18E Hornet reproduced to stunning effect by the ...

Star Max F4 Phantom (RAF Grey) EDF ARTF One of the most instantly recognisable jets of all time, recreated by Starmax, experts in EDF technology. The F4 Phantom ARTF features a super lightweight foam airframe, with a host of scale detail moulded-in. Factory painted to great effect in this realistic scheme, this terrific model can be made ready for action with just a few hours of enjoyable assembly. Supplied complete with a factory fitted hi-performance fan unit, brushless motor, ESC, & 3 x nine gram servos. Simply add a suitable receiver & flight battery for head turning performance that wont fail to impress. Supplied complete with decals & easy-to-follow assembly instructions. Specification Wingspan:542mm Length:788mm Radio System:4 Channel Tx & Rx req. Electric Motor: ...

One of the most instantly recognisable jets of all time, recreated by Starmax, experts in EDF technology. The F4 Phantom ARTF features a super lightweight foam airframe, with a host of scale detail moulded-in. Factory painted to great effect in this realistic scheme, this terrific model can be made ready for action with just a few hours of enjoyable assembly. Supplied complete with a factory fitted hi-performance fan unit, brushless motor, ESC, & 3 x nine gram servos. Simply add a suitable receiver & flight battery for head turning performance that won't fail to impress. Supplied complete with decals & easy-to-follow assembly instructions. Specification Wingspan: 542mm Length: 788mm Radio System: 4 Channel Tx & Rx req. Electric Motor: 14L In-Runner Brushless (Inc.) Manufacturer: Ripmax Model: A-STAD07A ...

Star Max F9F Panther EDF ARTFThe F9F Panther is a hi-performance EDF jet with terrific flight characteristics. This delightful model is supplied complete with an efficient brushless motor, hi-thrust fan unit, ESC & 3x nine gram servos all factory fitted & ready to go! Just glue on the wings & tail surfaces, connect the pushrods to the controls, & add a suitable receiver & flight battery, for flights that will amaze even the most demanding park flying enthusiast. The airframe is moulded from superior grade EPS foam for the lightest weight, has stacks of scale detailing & is factory painted in this realistic U.S. Navy scheme. An authentic decal sheet is included to add even more realism.• Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, all are possible with the Panther• Powerful ducted fan unit with brushless motor makes it possible to fly this plane at high speed in windy conditions • Accurate scale appearance with great attention to detailing • Computer designed aerofoil section for excellent flight performance• Comprehensive assembly instructions included ...

And now for something very different! The unusual lines of the HE162 are faithfully recreated in highly detailed moulded foam & factory painted ready for you to assemble! Offering truly outstanding value this model features factory fitted servos, fan assembly & a brushless motor with a perfectly matched electronic speed controller. Flight performance is best described as excellent, with good speed & solid handling that will inspire all that fly her! The accurate scale appearance makes it a real eye catcher at the flying field. This highly prefabricated ARTF model only requires a few hours simple assembly to complete & is supplied very comprehensive instructions. A perfect choice for the pilot who craves originality & appreciates the staggering level of performance & value on offer. Specification Wingspan: 790mm Length: 988mm Radio System: 4 Channel Tx & Rx req. Electric Motor: 14L In-Runner Brushless (Inc.) Manufacturer: Ripmax Model: A-STAD05A ...

This exciting Grippen ARTF ducted fan model is supplied complete with three 9 gram servos pre-installed & is Transmitter & Receiver ready, which means that you can head for the skies in the shortest time! Featuring a custom ducted fan unit & hi-performance brushless motor & ESC, which combine to provide plenty of power for rolls, loops & inverted flight. The large delta wing makes landings slow & predictable. Simply glue on the wings & tail fin, connect the pushrods to the elevons & rudder, fit your receiver & suitable flight battery. Created from lightweight but extremely durable EPS foam, the Grippen has lots of moulded-in detailing & is factory painted to this exciting scheme. Requires 4 channel transmitter & receiver with elevon/delta mixing function. Supplied complete with decals & illustrated assembly instructions, this exciting model represents remarkable value.

Specification Wingspan: 671mm Length: 1073mm Radio System: 4 Channel Tx w/ Delta Mix & Rx req. Electric Motor: 14L In-Runner Brushless (Inc.) Manufacturer: Ripmax Model: Star Max JAS 39 Gripen EDF ARTF (A-STAD02A)

...