More From Contributor

£4.00
S Curve by Sheena Norquay A clever way to use up those little fabric samples lurking in your scrap bag... Finished



...
Archived Product
£9.95
S. S. Balboa – MM2061 This plan was first published in the November 1990 issue* of Model Boats. There has been a regular demand for it via the model boating forums & thanks to the kindness of its designer Glynn Guest, we are now able to re-introduce it into the My Hobby Store Plans Service. The completed model is 24 inches (60cm) long & the plan, which is on two sheets,

Includes::
some constructional information. The model is straightforward to build using basic hand tools & readily available materials & adhesives. * Copies of the relevant accompanying article from Model Boats November 1990 may also be ordered from My Hobby Store.

...
Archived Product
£854.99
Built on a 4mm alloy chassis with double wishbones at front & rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The model is serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front & rear axle king pin angle, trailing effect & toe-in can be adjusted by means of track rods or respectively adjusting screws with right-/ left-handed thread. Further equipment points are differential gear, easy-running FG ball drive, alloy brake caliper with big brake disk, oil-pressure shock absorbers with volume control & external adjusting ring for the initial stress of the springs. All rotating parts as shafts, axles, clutch bell a.s.o. are supported by ball bearings. The model is equipped with a powerful 23ccm combustion engine which runs with a 2-stroke petrol-oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-experienced system: engine – 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box. The tires are ready glued. All Sportsline 04 models can be upgraded to an adequate Competition model by means of further FG Tuning accessories, details of which you will find in the FG catalog. Manufacturer: Ripmax
- FG Modelsport Model / Part No: S/ Line 08 Carrera GT RTR (Clear) (C-FG142079R)
...
Archived Product
£854.99
Built on a 4mm alloy chassis with double wishbones at front & rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The model is serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front & rear axle king pin angle, trailing effect & toe-in can be adjusted by means of track rods or respectively adjusting screws with right-/ left-handed thread. Further equipment points are differential gear, easy-running FG ball drive, alloy brake caliper with big brake disk, oil-pressure shock absorbers with volume control & external adjusting ring for the initial stress of the springs. All rotating parts as shafts, axles, clutch bell a.s.o. are supported by ball bearings. The model is equipped with a powerful 23ccm combustion engine which runs with a 2-stroke petrol-oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-experienced system: engine – 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box. The tires are ready glued. All Sportsline 04 models can be upgraded to an adequate Competition model by means of further FG Tuning accessories, details of which you will find in the FG catalog. Manufacturer: Ripmax
- FG Modelsport Model / Part No: S/ Line 08 Porsche GT2 RTR (Clear) (C-FG145154R)
...
Archived Product
£429.99
Thunder Tiger
- S50 Sledgehammer
- Red (TT6225F71) The MTA4 Sledge Hammer S50 is ready to smash all its rivals. Take the ever

...
Archived Product
£14.99
Safe Woodmachining Video 3
- Wood machining is not an operation to be undertaken without some training in safe working practices.
...
Archived Product
£9.95
Sailing Galleon MM641 Designer: F W Boyd Star Rating: *** Practical model Approx. 24in overall length, hull 19.5in., & height 22in of a typical galleon of the Armada period. Bread & butter construction simplified rigging with interlocked yard bracing for quick trimming. Featured in " The Model Maker Magazine" May-June 1961 ...
Archived Product

S50 Sledgehammer - Blue (TT6225F72)

Thunder Tiger - S50 Sledgehammer - Red (TT6225F71) The MTA4 Sledge Hammer S50 is ready to smash all its rivals. Take the ever popular MTA4 truck and combine it with the all new, massively powerful PRO50-BK engine and you have a seriously mean piece of kit. To make sure all that extra power gets down on to the ground, the 2-speed transmission now comes equipped with new tough steel gears and steel CVA’s that are up to the job of handling the massive torque. Features: Pre installed with 2.4GHz Radio EquipmentOversized heat sink head & engine mount New slipper clutch kit 2 speed transmission New ultra tough steel spur gear New heavy duty CVA’s New high performance tuned pipe New stiffer shock springs New PRO-50BK shaft start engine New style body and decals New chrome wheels and high
grip tyres New rear wheelie bar Includes hand held starter unit Specifications: Length: 558mm Width: 438mm Height: 273mm Wheelbase: 368mm Weight: 6200g Ground clearance: 108mm
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£429.99

Product Description

Thunder Tiger
- S50 Sledgehammer
- Red (TT6225F71) The MTA4 Sledge Hammer S50 is ready to smash all its rivals. Take the ever popular MTA4 truck & combine it with the all new, massively powerful PRO50-BK engine & you have a seriously mean piece of kit. To make sure all that extra power gets down on to the ground, the 2-speed transmission now comes equipped with new tough steel gears & steel CVA’s that are up to the job of handling the massive torque.

Features:
Pre installed with 2.4 G Hz Radio Equipment Oversized heat sink head & engine mount New slipper clutch kit 2 speed transmission New ultra tough steel spur gear New heavy duty CVA’s New high performance tuned pipe New stiffer shock springs New PRO-50BK shaft start engine New style body & decals New chrome wheels & high grip tyres New rear wheelie bar

Includes::
hand held starter unit Specifications: Length: 558mm

Width:
438mm

Height:
273mm Wheelbase: 368mm Weight: 6200g Ground clearance: 108mm

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Engine - A machine designed to convert fuel into motion
Steel - An alloy made predominately of Iron combined with <2% carbon
Radio - A device used for listening to audio transmissions
Chrome - A shiney metalic finish where chromium is electroplated onto an object
Blue - A primary colour
Heat - A term used to define thermal energy
Hand - A part of the body at the end of the arm
Hand - A pointer which indicates time on a clock face
Red - One of the three primary colours
Chrome - A shiney bright metalic coating of chromium applied to metals
Hammer - A tool used for providing impact to an object such as a nail
Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.
heavy - A concept of weight indicating an item may require some effort to lift or move
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
speed - A measurement of how fast an object travels between two points
Width - The measurement of something from one side to the other.
Popular - Something that is admired and liked by many people.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Head - The upper part of a body typically separated by the neck.
Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu