The Favorite
- ringbox with 14-ring mechanism combines the advantages of the proven Favorite
- ring binder with the accompanying

...

Ripmax. S. FS120 Surpass E w/FS120SE Silencer (L-OS35530) This is the economy, suction-fed version of the FS120S engine
- without
...

Ripmax Arrowind Brushless ESC-40A (SW) (P-AWDFC4005SW) Arrowind ESCs are built to extremely accurate standards & very high quality materials are used throughout. Arrowind are proud of that quality & are happy to display it to you by the use of clear heatshrink outer covering. That quality results in predictable, high performance time after time. The setup of each ESC can be made using stick commands, or in a much more user-friendly way, with the optional program card. The LCD display on the card is easy to read & the program steps are logical. The program card has all the options written on it to save you always carrying the instructions! Each ESC comes pre-programmed for Li-Po cells as part of the default. All other battery types can be used by programming the exact low voltage cut-off value you require relative to the type of battery. You can of course course use Li-pos at a different cut-off value as well. By selecting the correct combination of parameters, these ESCs can be used for Aircraft, gliders & helicopters alike. Programmable

Features: Cut Off Voltage: Low voltage protection threshold, User can set voltage threshold according to cell quantity within a range of 00.0~49.9v. Default is 00.0V (Li-Po automatic) Start Power Position Percentage: (00%~29%) Default is 00% Timing Mode: Low/ Mid/ High/ Highest Default is Middle Brake Type: Off/ Soft/ Hard Default is Off (brake disabled) Start Mode: Fast Start/ Soft Start/ Very Soft Start Default is Fast Cutoff Type: Soft-Cut/ Cut-Off Default is to reduce the output power (Soft-Cut) Throttle Curve Mode: CURVE1/CURVE2/CURVE3 Default is curve 1 (Linear) Motor Rotation: Forward & Reverse Default is Forward Specification: Weight: 36g Max Continuous Amps: 40 A Max Burst Amps: 50 A Li-XX Cell Count: 2-5 Nicd/ Ni MH Cell Count: 5-14BEC: Switch 3 A Programming: Yes Dimensions: 58 x 27 x 10mm

...

Ripmax Black Horse Edge 540V3 91 ARTF (A-BH091) The Red Bull air race series concentrated the designs of many aerobatic aircraft into a combination of speed & agility. A few went that extra mile & added true beauty as well. The Edge 540V3 is one such aircraft! The Edge 540V3 is a design with many curves in it & Black Horse are the masters of complex curves & wooden construction. The complex fuselage blends into both the racing canopy & cowling alike to limit drag as much as possible. The wing section has been chosen to give both high speed & high G stability, making the Edge 540V3 a joy to fly without any nasty tendencies. Thos up-swept wing tips go a long way to reducing the tip stalling usually present in such aircraft, & to cap it all, they look sexy too! The heavy duty aluminium undercarriage legs have fairings & GRP spats to add that final touch to the scale profile. Add a large GRP cowl & the quality is obvious from all angles. Just to finish it off, that dramatic & sligfhtly British colour scheme makes this Edge 540 stand way out from the crowd. The Black Horse Edge 540V£ is a model to make your clubmates envious. Specification: Wingspan: 1610mm (63.39") Length: 1290mm (50.79") Weight: 2.9kg (6.38lb) Servos: 5 Servos Radio System: 4/5 Channel Electric Motor: KMS Quantum 4130/07 Recommended IC Engine: 15ccm 4-Takt S/C Rec: Ripmax Dragon-X 75 A Li Po Recommended: 6S 5400m Ah 25C ...

Ripmax Great Planes Escapade. 61 EP ARTF (A-GPMA1201) With its bolt-together assembly, the Escapade. 61 ARF is a breeze to build — & so enjoyable & affordable, youll want to fly it every chance you get. You have a variety of options for powering it, & the larger

Dimensions add stability & visibility to your sport maneuvers. The two-piece wing is another convenience features. The wing panels assemble onto a joiner tube, simplifying building as well as transportation. With a. 61 two-stroke you have a great second plane for low-wing maneuvers. A. 91 offers the power for higher speeds & vertical performance. Electric modelers will enjoy the Escapade set up with a clean & quiet outrunner brushless motor.
Features: Flies equally well with a glow engine or brushless electric motor Tail surfaces bolt on & align automatically, & control horns are pre-installed & pre-aligned Control surfaces are pre-hinged A two-piece wing simplifies assembly as well as transportation Other convenience/detail touches include a fiberglass cowl & wheel pants, plus a painted & installed pilot figure Specification: Wingspan: 1725mm (68") Length: 1485mm (58.5") Weight: 3740
- 4080g (8.25
- 9.0 lb) Servos: 4
- 5 Radio System: 4 Ch. Electric Motor: KMS 4130/09 (Rec.)IC Engine. 61
-. 95 2-Stroke or. 91
- 1.20 4-Stroke Speed Controller: 60 A Wing Area: 52.4 dm² (813 in²) Li Po: 22.2V 5000m Ah Li Po







...

Ripmax Intellect 3S 5000m Ah 30C Li-Po (O-IT3S1P500030A) Intellect, one of the worlds leading manufacturers of Nick Metal Hydride batteries, proudly announce, after a long development programme, their new range of Li-Po & Li-Fe battery packs. Combining their knowledge of the R/C industry together with their experience in supplying Lithium batteries for use in full seized cars, Intellect Li-Po & Li-Fe batteries are available in a wide range of sizes, voltages & capacities, & there are dedicated packs for R/C cars, aircraft & helicopters, as well as both transmitter & receivers packs. With very competitive pricing, & a wide range from launch, these high performance packs are perfect for almost every application. Specification: Weight: 415g Capacity: 5000m Ah Dimensions: 160 x 48 x 30mm Voltage: 11.1V ...

Ripmax Intellect 3S 5000m Ah 30C Li-Po (O-IT3S1P500030A) Designed equally for both aero & heli applications, this mini, analogue servo has strong torque & good speed delivered through a tough metal gear train. That 3.5kg.cm of torque at 6v is more than most servos deliver at this size & weight. Specification: Weight: 17.0g Bearings: Plastic bushes Dimensions: 29.5 x 11.6 x 30.2mm Gear Type: Metal Speed (4.8v): 0.13 sec/60 D Speed (6.0v): 0.11 sec/60 D Torque (4.8v): 3.0kg Torque (6.0v): 3.5kg Voltage Range: 4.8
- 6.0V
...

Ripmax KMS Quantum 4130/07 Brushless Motor (M-KMSQ4130/07) Quality, performance & value-for-money are all combined to provide ...

Ripmax Mini BB Servo 16g 0.14s/2.5kg (P-SD200) At last a true, high quality, ballraced economy mini servo. The SD200 features 4.2mm 1st & 2nd gears for strength & reliability as well as 2.5kg/cm torque & 0.14sec/60° speed. The SD200 sets the standard in mini servos. Suitable for high voltage applications such as 2S Li-Po. Specification: Weight: 16g Dimensions: 29.5 x 25 x 13.9mm Speed: 0.14 sec/60° (4.8v) Torque: 2.5 Kg/cm (4.8v) Voltage: 3.5
- 9.6v
...