Constructed in the same manner as the full sized Mirror Dinghy, this 1:6 scale radio controlled model sailboat kit is a scale builder's dream! The kit features laser cut wood parts, scale rudder (with working tiller), removable centreboard, pre-sewn sails, detailed instructions, pre-cast ballast bulb, working running rigging & all fittings. The Mirror Dinghy was the winning entry in a design competition sponsored by the London Daily Mirror Newspaper. Designed by Jack Holt & Barry Bucknell, the Mirror has become one of the world's most popular designs. Since its appearance at the London Boat Show of 1963, over 70, 000 have been constructed. This beautiful boat is now available as a 1:6 scale radio controlled model. The kit has been designed to be built in the same ' Stitch & Glue' construction as the real boat & ll wood pieces have been laser cut. The kit also

Includes:: a main & jib with bolt rope & jib hanks, a pre-cast ballast bulb, fibreglass tape & wire for stitching & a detailed instruction booklet. The model sails very realistically & is easily transported thanks to the removable keel & retracting gaff. Whether used as radio control or simply displayed as a master piece for your living room, you will be amazed with the results. Scale: 1:6 Length: 550mm (21.66") Beam: 239mm (9.4")
Height: (rigged) 1041mm (41") Model suitable for R/C. Manufacturer: Osbourne Model Kits Model: Mirror Dinghy (1:6 Scale)


...

A 1938 stepped hydroplane driven by Harold Wilson, & designed by Douglas van Patten for Gold Cup racing. Hull construction of plywood with mahogany deck & vac formed parts, the kit features laser cut components, genuine copper exhaust pipes, scale vinyl decals, display st&, motor mount (for 500-600 motors) & scale cockpit interior with cloth seats. Kit also

Includes:: the running pack which features motor to shaft coupler, thrust bearing, drive shaft, stuffing tube, prop, prop nut, rudder & mounting hardware. Scale: 1:12 Length: 648mm (25.5") Beam: 178mm (7") Model Suitable for R/C. Manufacturer: Osborn Model Kits Model: Model Kits Miss Canada III (1:12 Scale Inc Drive Kit) (OSB-2502)

...

Including many of the features of the 1:12 scale RC kit, this is a 1:24 scale static display model of the sleek stepped hydro. Scale: 1:24 Length: 311mm (12.25") Beam: 89mm (3.5") Static model not suitable for R/C. Manufacturer: Osbourne Model Kits Model: Miss Canada III (1:24 Scale) (OSB-2510) ...

Beautifully crafted 1:10 scale radio controlled model kit of Art Ashby's famous 266 class hydroplane. The model is made from 3mm (1/8") plywood frames & 0.8mm (1/32") plywood decking & also features a vac formed cowl. Designed to run on a. 05 or brushless motor system, this kit also

Includes:: the running pack which features rudder set, turn fin, drive shaft, stuffing tube, motor to shaft coupler, prop, prop nuts, strut, antenna mount & mounting hardware. Scale: 1:10 Length: 635mm (25") Beam: 280mm (11") Vinyl decals are not included Model Suitable for R/C. Manufacturer: Osbourne Model Kits Model: Miss Canadiana (1:10 Scale Inc Drive Kit) (OSB-2505)

...

1:12 Scale model of the 3 time Harmsworth Trophy winner; 1959, 1960 & 1961. Kit features laser cut components, all plywood construction, authentic scale decals, vac formed cowl & Rolls Royce Griffin engine. Kit also

Includes:: the running pack which features motor to shaft coupler, thrust bearing, drive shaft, stuffing tube, prop, prop nut, rudder, turn fin & mounting hardware. Scale: 1:12 Length: 788mm (31") Beam: 318mm (12.5") Model Suitable for R/C. Manufacturer: Osbourne Model Kits Model: Osborn Miss Supertest III (1:12 Scale Inc Drive Kit)

...

The classic lines of what would be known as the ' Sea Flea', this unique 1:12 scale static model of an outboard hydroplane is made from quality ply & basswood & is laser cut for precision fitting parts. The kit

Includes:: easy to follow instructions, detailed motor decals for the Johnson 15hp motor, Deadman throttle & a display st&. Scale 1:12 Length 279mm (11") Beam 127mm (5") Static model not suitable for R/C. Manufacturer: Osbourne Model Kits Model: Sea Flea (1:12 Scale) (OSB-2513)

...

The Utility Runabout is a 1:12 scale model of the classic Canadian design runabouts popular during the 1940's & 1950's. The model features a planked mahogany hull, laser cut parts, finest top quality select wood & detailed hardware package. Kit also

Includes:: the running pack which features motor to shaft coupler, thrust bearing, drive shaft, stuffing tube, prop, prop nut, rudder & mounting hardware. Scale: 1:12 Length: 406mm (16") Beam: 140mm (5.5") Model Suitable for R/C. Manufacturer: Osbourne Model Kits Model: Utility Runabout (1:12 Scale Inc Drive Kit) (OSB-2503)

...

The Mirror Dinghy is now available as a 1:12 scale static display model which retains many of the features of the 1:6 RC kit. This kit

Includes:: laser cut parts, detailed instructions, realistic sails, rigging hardware & display st&. Scale: 1:12 Length: 279mm (11") Beam: 120mm (4.75")
Height: (mast) 406mm (16") Static model, not suitable for R/C. Manufacturer: Osbourne Model Kits Model: Mirror Dinghy (1:12 Scale) (OSB-2512)


...