The Apóstol Felipe was one of the six galleons built by Martín de Arana for King Felipe IV. It formed part of the " Silver Galleons". This kind of galleon was used for transporting goods & treasures in the " Race for the Indies". Its first voyage as a member of the galleon fleet was made in 1629, transporting treasures to Spain. It was an Admiral vessel of the Guardian Armada until 1633. It took part in the war of Brazil to recuperate Pernambuco & transported troops & money to Flanders, taking part in the battle of Dunas. Scale: 1:60 Length: 785mm
Width: 310mm
Height: 695mm Kit Kit Difficulty Rating: Advanced Kit

Includes:: plank-on-bulkhead construction with laser cut wooden parts. Fittings are abundant in quantity as well as quality. Finely cast metal pieces include doors, stern ornamentation, bilge pumps, 30 gun ports & frames, falconets, gun carriages with wheel shafts & wheels, cleats, lantern & anchor stocks. Gallery ornamentation, cannon barrels, chainplates, bowsprit iron, trestletrees, eyebolts & rings are brass. Ready-to-use boxwood blocks & deadeyes, 4 diameters of rigging, silk-screened flags & pennants, plus pre-sewn sails recreate the rig plan of the original galleon. Manufacturer: Oc Cre Kits Model / Part No: Apostol Felipe Galleon 1:60 Scale (OC14000)



...

The 19th & early 20th centuries saw the greatest flow of navel transport between Spain & her overseas colonies, thanks to the commercial agreements that had been established with them. The Aurora is a good example of a brig. This kind of vessel was widely used for travel to the Americas as her rigging provided the best results in conditions of constant wind. Scale: 1:65 Length: 682mm
Width: 200mm
Height: 483mm Kit Kit Difficulty Rating: Intermediate Kit features plank-on-bulkhead construction, laser cut wooden parts & double planked hull. An ample fittings package contains ready-to-use boxwood blocks & deadeyes, cast metal lifeboat, blackened metal anchors, mast caps & ship’s wheel, brass nails, stanchions, eyebolts & belaying pins & many other detail parts. Kit also

Includes:: four diameters of rigging line, silk-screened flag, wooden baseboard with nameplate & pedestals. A full set of sails is pre-sewn & ready to rig! Manufacturer: Oc Cre Kits Model / Part No: Aurora Brig 1:65 Scale (OC13001)



...

The topsail schooner " Cala Esmeralda" was built in Majorca between 1916 & 1919. With an American style in terms of her figure & a most elegant line of sail. This schooner was one of the largest & most beautiful to be rigged in Majorca. After 1934 engines were incorporated into this type of schooner & they were used for the coastal trade up until the mid seventies. Scale: 1:58 Length: 760mm
Width: 273mm
Height: 575mm Kit Kit Difficulty Rating: Intermediate Kit features double plank-on-bulkhead construction, laser-cut wooden parts. Accurately detailed fittings include boxwood blocks & deadeyes, brass eyebolts, rings & belaying pins, white metal winch & lifeboat, three diameters of rigging line & more. Oc Cre provides a full complement of sails that are pre-sewn & ready to rig. Wooden display cradle & a metal nameplate await your finished model.
MANUFACTURER: Oc Cre Kits Model / Part No: Cala Esmeralda Topsail Schooner 1:58 Scale (OC13002)


...

The Carmina is an authentic representation of a traditional 1900s Mediterranean fishing boat. This entry-level kit from Oc ...

These picturesque & beautiful ships resembled the galleys in terms of their raised quarter-decks, although they were much easier to work, a much appreciated characteristic in the naval battles of the period, where they were involved in numerous daring actions. The xebecs played a decisive role as auxiliaries to fleets on missions of exploration, discovery, lookout & mail; specifically during the Algerian landings & the second siege of Gibraltar. Scale: 1:60 Length: 860mm
Width: 160mm
Height: 630mm Kit Difficulty Rating: Intermediate Kit features plank-on-bulkhead construction, laser cut wooden parts & double planking in flexible lime-wood & rich African walnut. The lifeboat is built strake by strake, just like the real thing. Original armament is replicated with 24 brass cannon on bronzed metal carriages & 12 brass falconets. In addition to brass belaying pins, eyebolts & rings, gudgeons & pintles, you’ll get many photo-etched detail parts. Finely cast white metal ornamentation is well detailed & plentiful. Pre-sewn cloth sails, silk-screened flag & three diameters of rigging complete the model.
MANUFACTURER: Oc Cre Kits Model / Part No: Cazador Xebec 1:60 Scale (OC14002)


...

Originally a merchant brigantine, this ship was transformed when pirates fitted it out with 16 cannons & four falconets. The word Corsair means ‘ Pirate’.
Features: Pre-cut pieces for perfect fit Step by step assembly instructions Diecast pieces included All strip wood included Specification: Length: 750mm
Height: 580mm
Width: 270mm Manufacturer: Oc Cre Kits Model / Part No: Corsair Brig (OC13600)


...

The frigate Diana was launched on the 10th of March 1792. It formed part of the series of frigates known as " Mahonesas", as they had been built in the city of Mahón. Thanks to its design, it could sail faster than its predecessors. It took part in the war against France along the Catalan coast although, during the war of Independence, its base was in Cadiz. As a member of the naval forces of Havana, it took part in battles against the corsairs in the Antilles & made various trips across the Atlantic. It was broken up in 1833 in the naval shipyard of Cartagena. Scale: 1:85 Length: 850mm
Width: 360mm
Height: 635mm Kit Difficulty Rating: Advanced Kit features double plank-on-bulkhead construction. All wooden parts are laser cut for ease of assembly. The fittings package consists of hundreds of parts too numerous to mention. Cannon barrels, bell, rudder hinges, eyebolts, rings are brass. Figurehead, bell tower & bell, helm, anchors, two ship’s boats, belaying pins, & waist railing newel posts are cleanly cast white metal. Gilded metal is used for gun carriages, gun ports & frames. Four diameters of rigging form the lines & pre-sewn cloth sails are ready to rig.
MANUFACTURER: Oc Cre Kits Model / Part No: Diana Frigate 1:85 Scale (OC14001)


...

Dos Amigos was a slaver, one of the famous early 19th century Baltimore clippers. She was low-slung & fast, double-masted, small & agile, painted black to make it easier to hide herself off the African coast after slaving had been abolished. Her hull was modified, with space below decks to bring the slaves from Africa to Cuba for the sugar plantations. Her last voyage as a slaver was in 1830, sailing out of the port of Havana on 13th July, with a crew of 34 & armed with a single carronade, 16 rifles & 15 pistols. She was captured by the British brig HMS Black Joke, with 567 African captives aboard. She was then put up for auction & purchased by the Commodore of the British Anti-Slavery Squadron, Jonathan Hayes, who converted into an interception ship & named her Fair Rosamond. She patrolled the seas around Cuba until she was withdrawn from service in 1843. Scale: 1:53 Length: 905mm
Width: 330mm
Height: 675mm Kit Difficulty Rating: Intermediate Kit

Includes:: laser cut wooden parts for easy assembly & the hull is double planked. A large array of fittings

Includes:: ready-to-use hardwood blocks & deadeyes, brass eyebolts, belaying pins & rings. Other parts, such as anchor, bell, carronade & ammunition are precision cast Brittania metal. Cotton rigging comes in several diameters & a full complement of sails is pre-sewn & ready to mount. Detailed plans & photographically illustrated instructions show every stage of construction. (Base board & pedestals not included). Manufacturer: Oc Cre Kits Model / Part No: Dos Amigos Brigantine Schooner (OC13003)





...

This advanced level kit is of an 18th century Spanish bomb mortar vessel. Features plank-on-frame construction techniques using pre-cut wooden parts in flexible lime-wood & rich dark walnut.

Includes:: comprehensive accessory pack, 12 bronzed metal cannons, pre-sewn sails & all required rigging. Photo illustrated step-by-step instructions ensure that this great value kit builds into an impressive model that you will be proud to own & display. Specification: Length: 695mm

Width: 260mm

Height: 525mm Manufacturer: Oc Cre Part / Product Code: La Candelaria – 1:85 Bombarda (D-OC15800)





...

The Candelaria is a Mediterranean bomb vessel, the size of a brig but broader & with two masts: the main mast is positioned almost in the centre with a round rig & the small mizzen mast has a gaffsail. Between the main mast & the forecastle are the mortars. The Candelaria was designed & built to work as a floating battery when blockading ports or during sieges of sea forts. Scale: 1:85 Length: 695mm
Width: 260mm
Height: 525mm Kit Difficulty Rating: Advanced Kit

Includes:: plank-on-frame construction which uses pre-cut wooden parts & double planking in flexible limewood & beautiful dark walnut. Smoothly finished boxwood blocks & deadeyes are ready to use. White metal figurehead, lifeboat, gunport frames, quarter gallery sides, bell tower, upper stern decorations, chimney, buckets, anchors, main topmast crosstree are finely cast. Brass hinges & shafts, 12 gun carriages cannon eyebolts, belaying pins, quarter deck pillars & quarter gallery windows are all in proper scale. Stern ornamentation is photo-etched brass, & 12 bronzed metal cannon serve as armament. Pre-sewn sails, four diameters of rigging line, silk-screened flag wooden display base & pedestals. Manufacturer: Oc Cre Kits Model / Part No: La Candelaria Bomb Vessel 1:85 Scale (OC13000)



...