Pre-Assembled 1:8th scale 4WD electric powered monster truck with 2.4 G Hz radio system, FLUX TORK brushless motor, FLUX BLUR electronic speed control, & painted body. Battery packs & charger not included. Machined Bulletproof Gear Diff Set now installed in EVERY Savage Flux HP kit! Now with an All-New 2.4 G Hz DSSS Radio! The Savage Flux HP is loaded with new & exciting features, read on to find out more! Extra-Low CGTwin Battery Power Flux Tork 2200 Motor All-Metal Transmission Gears XL Tough Suspension Machined Super Heavy Duty Diff Gears Thick Super Heavy-Duty Dogbones Machined Steel Spur Gear Big Bore Nylon Shocks SF-5 High Torque Metal Gear Steering Servo Savage Wheelie Bar Included All-Terrain Tyres GT-2 Bodyshell with All-New Flame Paint Scheme HPI RTR cars & trucks are 98% factory assembled
- they come Ready-To-Run & equipped with all the radio gear required. Just a few steps are needed to get your car up & running, such as adding the batteries to the transmitter & charging up your choice of batteries to fit in the truck! Full Assembly Instructions & HPI RC Cars DVDThe HPI RC Car DVD is your personal RC car expert in a box!2.4 G Hz Radio System with Failsafe RF-20 receiver Electronic Failsafe Comes fully assembled with Flux Tork 2200 motor, Flux Blur speedo, HPI TF-20 2.4 G Hz radio system, SF-5 high torque metal gear steering servo, & painted & trimmed bodyshell. Also contains detailed instruction manual & HPI RC Cars DVD. Note: the battery packs required for the truck are two Ni MH (up to 8-cell 'flat' type packs) or two identical high-quality Li Po batteries with at least 4000m Ah capacity & 25C discharge rate. Warning! Due to the high performance electronics in this kit, the use of Li Po batteries below 4000m Ah & 25C, or the use of lower quality Li Po batteries, may cause damage to battery and/or speed control. Using batteries below the specified ratings may void the warranty.
MANUFACTURER: HPI Racing Model:RTR SAVAGE FLUX HP WITH 2.4 G Hz & GT-2 TRUCK BODY (104242)

...

Pre-Assembled 1:8th Scale 4WD Nitro Powered Truck with F4.6 Engine, Roto Start System, 2 Speed Transmission, & 2.4 G Hz radio system. The Savage X 4.6
- now with 2.4 G Hz! Savage X 4.6 Durability Savage X 4.6 Speed F4.6 Big Block Power! Drivetrain Savage X Refinements Main Features Full-time shaft driven 4WD system for maximum grip, power & grunt! Wide-track suspension gives you smooth driving & great handling
- nearly 17 inches (43cm) wide! Eight long-stroke oil-filled shock absorbers provide confidence over the jumps & on big-air landings. Adjustable 2-speed transmission set with hardened metal gears gives you great acceleration & top speed! Massive 160cc fuel tank for long run times & huge amounts of bashing & racing fun. X-style clipless radio box protects the electronics from splashes, dirt & more. Lightweight suspension arms improve suspension action & give great response in corners & over bumps. Full set of rubber-sealed ball bearings for maximum efficiency & power from the engine. Stiff racing springs for superb driving feel & best suspension action. Adjustable turnbuckles. Hardened 4-gear diff setup can handle the abuse of high-horsepower engines like the F4.6. Cam-type servo saver steering arms improve the efficiency & power of the steering servo. Radio box features openings for a battery charging jack & 308 illuminated Battery Level Indicator (not included). The low centre of gravity chassis drops the engine, centre gearbox & radio 5mm lower than the Savage 25, resulting in better handling & faster lap times. Large 17mm metal alloy hex hubs hold the wheels securely & prevent the hex stripping in the wheels under heavy load applications. New lightweight GT-2 tyres with aggressive tread pattern for excellent all-terrain traction & long tyre lifetime. To add cool looks, the GT-2 tyres are mounted & pre-glued on Chrome Warlock wheels. Included is an optional nylon roll cage which will help protect your engine & heat sink. It can be mounted with almost every Savage bodyshell but requires additional cutting on your bodyshell. Full Assembly Instructions & HPI RC Cars DVDWhat You Need: Fuel Bottle Glow Starter Nitro Fuel 10 AA Batteries 7.2v Stick Pack Battery Stick Pack Charger Manufacturer: HPI Racing Model: Savage X 4.6 W/ 2.4 G Hz & Nitro GT-2 Truck Body Ready To Run (104266)

...

Pre-Assembled 1:8th Scale 4WD Nitro Powered Truck with K5.9 Engine, Roto Start System, 3 Speed Transmission, & 2.4 G Hz radio system Extra-Long Alloy Chassis Tall All-Terrain Tyres 3 Speed Transmission Installed Wider Stance & 17mm Hex Hubs New Tougher Suspension Uprights Reinforced All-Metal Differentials Larger Diff Outdrives Thicker Dogbones Machined Steel Spur Gear Aluminium Three-Shoe Clutch High Torque Metal Gear Steering Servo 6v Ni MH Receiver Pack & Charger Easy to Drive! Extra-Tough Parts K5.9 Big Block Engine Aluminium Exhaust System Tough ABC Construction Dual-Stage Air Filter Roto Start 2 Installed Features Full-time shaft drive 4WD system for maximum grip, power & grunt! Extra tough slipper clutch for drivetrain security when landing big-air jumps Massive 160cc fuel tank for long run times & huge amounts of bashing & racing fun. Easy-access radio box protects the electronics from splashes, dirt & more Radio box features openings for battery charging plug (included) & 308 illuminated Battery Level Indicator (not included) Eight long-stroke oil-filled shock absorbers provide confidence over the jumps & on big-air landings Savage X shock towers for loads of strength & adjustable suspension settings Double wishbone suspension for amazing handling & performance at any speed Lightweight suspension arms improve suspension action & give great response in corners & over bumps Large 17mm metal alloy hex hubs prevent the hex stripping in the wheels under heavy load applications Hardened 4-gear diff setup can handle the abuse of high-horsepower engines Alloy differential cases enhance drivetrain reliability & reduce maintenance downtime Full array of heavy-duty drivetrain components, from clutch to brakes & outdrives to hubs, ensure you have plenty of fun! Machined steel brake hub & dual red fibreglass brake discs provide secure & fast stopping power Cam-type servo saver steering arms improve the efficiency & power of the steering servo Extremely easy access to front & rear differentials
- no chassis disassembly required to get to diffs or tranny gears! Savage X-style vertical transmission case for fast disassembly & simple access to internal gears Stronger transmission case with extra webbing & enhanced strength over earlier Savage designs Full set of rubber-sealed ball bearings for maximum efficiency & power from the engine. Bigger, tougher ' Gigante' bodyshell has classic Savage styling & strength with 0.60" thickness polycarbonate Full Assembly Instructions & HPI RC Cars DVDWhat's Needed 6 AA batteries for transmitter 7.2v stick battery for Roto Start Battery charger for 7.2v batter Nitro fuel Glow starter Fuel bottle Manufacturer: HPI Racing Model: Savage XL 5.9 With 2.4 G Hz & Gigante Truck Body (EU 3-PIN) Ready To Run (104250)
...

The Trophy 3.5 is the perfect way to get into nitro 1:8 scale buggy racing! It's got everything you need for racing fun & bashing convenience, making it the perfect rally cross buggy for jumping right on the race track! It has a fully-featured racing chassis, a rugged competition suspension, all-new racing tyres, the powerful Nitro Star F3.5 (.21 cubic inch) engine & a reliable HPI radio system! Complete Racing Suspension Dual Disc Brakes Low Centre of Gravity Nitro Star F3.5 Engine 2.5 horsepower on tap On the inside, the F3.5 has true ABC construction, with a chrome-plated brass piston & cylinder surrounded by the lightweight aluminium case. To get you going quickly, the F3.5 uses a pullstarter system, & a large opening on the underside of the chassis means that you can utilise a starter box for even faster engine starting. If you want to upgrade to easier engine starting, just install the 87130 HPI Roto Start 2 engine starting system for push-button engine starting! Full Assembly Instructions & HPI RC Cars DVDHigh Quality Radio Gear Comes complete with pre-painted bodyshell, engine & radio gear (does not include radio batteries).

Includes:: comprehensive instruction manual & HPI RC Cars DVD. Manufacturer: HPI Racing Model: Trophy 3.5 RTR Buggy (10508)

...

After the massive success of the HPI Trophy Buggy, we are proud to release its bigger brother, the HPI Racing Trophy 4.6 RTR Truggy (101153) Technical Specification: Nitro Star F4.6 Engine Specs Displacement: 4.6cc Power: 2.9hp @ 32, 000RPMBore: 18.68mm Stroke: 16.6mm Glow Plug: R5 Carburettor: F1-7.5 (Composite 7.5mm)A tough chassis, sealed spiral-cut gear diffs, high-downforce racing wing & brand new truggy racing tyres complete the package, making the Trophy 4.6 Truggy the ideal track companion. Note: the tyres & wheels shown are not the production versions, these are for illustration purposes only.RTR Trophy 4.6 Truggy
- PERFORMANCE STRAIGHT FROM THE BOXFull Assembly Instructions & HPI RC Cars DVDHigh Quality Radio Gear What You Need: Nitro Fuel Glow Igniter Fuel Bottle 8 AA Batteries Manufacturer: HPI Racing Model: Trophy 4.6 RTR Truggy (101153)
...

This is the great looking & even better performing HSP nitro radio controlled buggy. The buggy is extra tough & a good all rounder performing well both on road & off. The Backwash is feature packed making it one of the top spec buggies on the market & the. 18 engine along with the automatic 2 speed gearbox makes it extremely quick. Please note there are two other cheaper versions of the HSP nitro buggy but this is the top of the range one that has the two speed gearbox & also the pivot ball suspension. These also have our Nitrotek upgrades on them such as the chrome finished wheels, Infinity engine & stick type transmitter. The Backwash comes fully built with everything included apart from fuel, glow start (both optional below) & 12 normal AA batteries. Nitrotek versions of this nitro radio controlled buggy have been upgraded with high quality Team Infinity engines. Team Infinity engines are made in Japan & feature a simplified carb that makes them the easiest to start & one of the most reliable engines on the market. Usually these models come with engines made in Taiwan or China that you will see being offered by other model shops selling these but from our experience we have found the extra few pounds for a Japanese engine is well worth it for the difference in quality & performance. We have had our Nitrotek versions of the Backwash kited out with traditional stick type controllers whereas the standard versions come with the wheel type controllers. This is a personal choice of what you are more comfortable with. Specifications: Length: 400mm
Height: 160mm
Width: 250mm Wheelbase: 275mm Gear Ratio 2 Speed: 5.84:1 (H) 8.58:1 (L) Ground Clearance: 26mm Front Tyres: 32mm width 86mm diameter Rear Tyres: 40mm width 86mm diameter Radio: Stick type Engine: Infinity. 18 Required to use: Fuel, glow start (both optional below) & 12 normal aa batteries.
Features: Pivot Ball suspension Assembled Oil-filled aluminium shocks 2.5mm thick anodised aluminium chassis Composite Tuned Pipe Pre-painted body with decals applied Super-efficient 4WD shaft-drive 75 cc fuel tank with splash guard 2 speed automatic gearbox Hollow light weight flywheel Slipper clutch system to protect spur gear High impact & high traction electroplated wheels Fiber disc brake for extra stopping power Front & rear hardened metal drive gears Sealed radio box protects the electronics Adjustable steel turnbuckles High performance Infinity 18 Engine Traditional stick controller.


...