The original Lancairs were high performance homebuilts that were winning awards at airshows all over the country by the early 1990s. This ARF version – the first ever produced – has many of the same attributes as the aircraft that inspired it. Supplied factory built with a painted fibreglass fuselage & its wings factory covered in Mono Kote offering speedy assembly & spectacular looks. Numerous extras – the upswept wing tips, factory installed tinted windows, moulded-in panel lines & painted fibreglass fairings & wheel pants, to name a few – add realistic detail. An aluminium spar joins the two tailplane halves making them easy to remove & reinstall at will. So, if youre the type of performance-hungry R/C pilot whos always on the lookout for a plane with aerobatic potential, the Lancair is for you!

Features: • Slow landings are assured due to effective flaps • The durable, tricycle landing gear with supplied fairings allows easy ground handling • Flight ready in 15-20 hours! Requires five channel radio with a minimum of 7 servos. Specification Wingspan: 2030mm (80") Length: 1320mm (52")IC Motor. 61-.75 Two Stroke /. 91 Four Stroke Manufacturer: Ripmax Model / Part No: Great Planes Lancair ARTF (A-GPMA1347)

...

Introduced in 1985, the full-size Lancair ES homebuilt kit enjoys a very high rate of successful customer completion a reputation shared by Great Planes R/C models. This easy-to-assemble ARF duplicates the smooth lines & curves of the original aircraft in strong, lightweight fibreglass… expertly capturing the original's "racy" looks & swift aerobatic performance

Features: • Assembles in as little as six hours •

Includes:: a perfectly matched Speed 400 motor with gearbox, spinner, & propeller • Wing panels remove for easy transport, & plug-in quickly & easily for flight • Clear canopy locks in place with magnetic power, but removes effortlessly for quick battery access Recommended EP Setup • Motor: Speed 400 Supplied • ESC: Jeti JES350 Eco • Battery: Impulse 3S 1450m Ah Li Po

Specification Wingspan: 1090mm Weight: 735 – 905g Radio System: 4 Channel radio with 4 micro servos Manufacturer: Ripmax Model / Part No: Great Planes Lancair EP ARTF (A-GPMA1165)





...

A fierce Formula One competitor for decades, the Little Toni is the inspiration for an ARTF model that's both an exciting everyday flyer & a superb racer. The wing halves & tail surface are balsa sheeted, built up & factory covered in genuine Mono Kote. The fibreglass fuselage, cowl, wheel spats & aluminium landing gear arrive painted to match, adding detail while saving building time & effort. A clear canopy, scale shape aluminium spinner, decals & Great Planes hardware are also supplied. In as little as 12-15 hours, the Little Toni can be turning heads at the field. In the air, she flies as well as she looks – tracking solidly, turning quickly, & slowing gently for smooth, easy landings. Capable of most aerobatic manoeuvres, Little Toni is most at home rocketing around pylons at breathtaking speeds.

Specification Wingspan: 1600mm (63") Length: 1435mm (56.5")IC Motor. 61-.91 Two Stroke /. 91 Four Stroke Manufacturer: Ripmax Model / Part No: Great Planes Little Toni ARTF (A-GPMA1320)

...

Flight Ready in as little as 30 minutes! With its B2 bomber inspired appearance & compact

Dimensions, you'll be able

...

In early 1942, the American Volunteer Group's success over China did wonders for U.S. morale following Pearl Harbor. The Flying Tigers & their shark-mouthed P-40 warhawks destroyed nearly 300 enemy aircraft while losing only 21 of their own. This sport-scale P-40 ARF does the WWII legend proud -with a high-quality design & the versatility to please every low-wing pilot. Great Planes

Includes:: a fiberglass cowl & lightweight, balsa/ply main structures covered in an attractive Flying Tigers trim scheme. The camouflage color scheme is topped off with such instantly identifiable details as this " Flying Tigers" insignia -lending just enough realism to turn each flight into a WWII adventure. You can assemble this model for belly landings or with the fixed wire landing gear provided. Warbird models of this size are typically foam or plastic, but the P-40 Warhawk is all-wood. Its construction quality & performance are superb -equal to any sport-scale model in the popular Great Planes lineup! The P-40 Warhawk comes covered in a trim scheme that captures the camouflage colors of the WWII Allied fighter. Decals shown are included & die-cut for easy application. For an outstanding brushless electric power system, outfit the P-40 with a 1450k V out-runner brushless motor, 45A ESC, & 3200m Ah Li Po battery. Laser-cut parts for installing a complete brushless electric power system are supplied. Accessing electronics for maintenance is as simple as removing the wing. If you prefer to fly using glow power -as required for AMA-sanctioned combat contests -Great Planes provides the mounting materials needed to install a 2-stroke. 25 cu in (4 cc) engine. Enjoy thrilling sport action or cut your combat competition's ribbon to shreds!

Specification Wingspan: 39 in (985 mm) Length: 34.5 in (875mm) Weight: 38-46 oz (1080-1300 g) Radio System: 4-channel radio req Electric Motor: 1450k V out-runner brushless motor Battery: 2000m Ah 9.6V Ni MH or 3200 11.1V Li Po battery S/C Rec: 45A brushless ESCIC Engine: 2-stroke. 25 cu in (4 cc) Wing Loading: 23-27 oz/ft 2 (69-84 g/dm 2) Wing Area: 242 in 2 (15.6 dm 2) Manufacturer: Ripmax Model / Part No: Great Planes P-40 Warhawk EP/GP ARTF (A-GPMA1472)



...

Great Planes P-51 Mustang. 46-70 ARTF (A-GPMA1205) Combat-tough & easy to assemble, this 56" span P-51 combines smooth sport flight habits with looks that evoke edge-of-your-seat warbird excitement. Its two-piece, balsa-sheeted foam wing has been covered in Mono Kote film, while the detailed cockpit

Includes:: an instrument panel, headrest & "ace" pilot figure. Performance is first-rate, too
- whether you install glow or electric power! Great Planes packs plenty of warbird realism into "sport scale". Check out the semi-scale trim scheme, created with Top Flite Mono Kote film
- & the detailed cockpit with instrument panel, headrest & installed pilot figure! The horizontal & vertical stabilizers are factory-hinged & bolt to the fuselage, aligning automatically. Assembly moves quickly
- you can be ready for your first dogfight in a matter of hours. The durable wing is constructed of balsa-sheeted foam, in two sections that assemble quickly & align automatically. It can also be taken apart for easy transport to your favorite flying field. Engineered for strong flight performance rather than precise scale accuracy, the Sport Scale Mustang makes an ideal step up from models such as the Great Planes Escapade or Cherokee. It goes where you point it, with aggressive looks but no bad habits. Specification: Wingspan: 1420mm (56") Length: 1270mm (50") Weight: 3.0
- 3.3kg (6.5
- 7.25 lb) Servos: 6 Radio System: 5 Ch.IC Engine. 40
-. 55 2-Stroke IC Engine. 70 4-Stroke Wing Area: 35 dm² (543 in²)







...

Accurately recreating the look of the 1930s-era naval military/sea rescue plane, the Great Planes PBY Catalina features a lightweight h&-crafted fibreglass fuselage, with traditionally constructed flying surfaces finished in durable film. Install twin brushless motors & you will be rewarded with an excellent power-to-weight ratio for exciting water takeoffs & landings. Supplied complete with a handy model cradle, generous hardware accessory pack & highly detailed photo-illustrated instructions. The PBY Catalina can be made flight-ready in as little as 10 hours. Perfect for 4 channel R/C with 4 mini servos. For super performance & great value we recommended installing twin KMS Quantum 2212/12 brushless motors, two KMS Sentry 18 brushless ESC, & an Impulse 3S 2100 -3200m A Li-Po battery. Specification Wingspan: 1360mm Length: 870mm (34.25") Radio System: 4 channel with 4 mini servos Manufacturer: Ripmax Model / Part No: Great Planes PBY Catalina EP ARTF (A-GPMA1154) ...

Just 105cm (41.5") across the wing tips, the Reactor 3D ARTF flies like a big plane but offers the "grab n' go" convenience of a park flyer. Generously sized for easier tracking & handling, it's designed for brushless power & spectacular 3D brilliance. Purpose-made hardware & a built-up balsa airframe provide a perfect balance of smooth, precision control & durable, lightweight construction. Ideal for intermediate pilots who want to master 3D skills
- & move beyond flat foamy looks & limits.
Features:• Factory-built & covered for minimum box-to-flight-line times!• Painted wheel pants & cowl enhance looks while eliminating extra work• Generous fuselage side area provides the lift needed for precision manoevres such as point rolls & knife-edge flight•

Includes:: a complete hardware package designed for maximum assembly convenience & absolute performance perfection• Designed for in-runner & out-runner brushless motors, without modification to mounts• For the perfect combination of performance, duration & excellent value we recommend a KMS Quantum 2820/05 brushless motor, Sentry 40 brushless ESC & an Impulse 3S 1450~2100m A Li-Po battery Specification Wingspan: 41.5 in (1055 mm) Length: 42 in (1065 mm) Weight: 24-27 oz (680-765 g) Radio System: 4+ channel micro radio (Req) Wing Loading: 9-10 oz sq/ft (27-31 g/dm) Manufacturer: Ripmax Model / Part No: Great Planes Reactor 3D EP (A-GPMA1540)



...

The Reactor has excelled with glow & electric power & now it really hits the "big time" -expanding to over 2m span with performance that's better than ever. At low speeds, the giant-scale Reactor flies solid & true. But for an all-out 3D machine, install a 50 cc petrol engine & increase the throws! • Excellent step up to giant-scale • Lightweight & durable to handle high-stress manoeuvres • Assembles in only 15-20 hours! • Large tail control surfaces increase the ability to fly demanding 3D aerobatics • Its two-piece, bolt-on wing allows easy transport to your favourite flying site Specification Wingspan: 84.5 in (2146 mm) Length: 85 in (2159 mm) Weight: 14-17 lb (6.35-7.71 kg) Radio System: 5-ch radio (6-ch rec); 7 Servos with 7.2 kg-cm Petrol Engine: 43 – 50cc IC Engine: 1.6 – 2.2 (2-Stroke) or 2.0 – 2.2 (4-Stroke) Wing Loading: 21-25 oz/in (63-77 g/dm) Wing Area: 1556 in (100.4 dm) ...

Accomplished pilots know that most planes designed for 3D maneuvers do not transition well into precision/pattern flying. But the Reactor Bipe is not like most planes. It's slightly larger & stronger than a park flyer, so it tracks better – especially in windy conditions. It also offers fresh perspectives in prefabrication which enhance assembly ease & overall quality of construction. With its good looks & broad flight envelope, the Reactor Bipe is one versatile performer that's also easy on the eyes! • Evolved from the original Reactor – one of the best 3D/precision airplanes ever engineered!• Ultra-strong, & capable of extreme maneuvers – without sacrificing the ability for precision flight.• Highly prefabricated with a dazzling, original trim scheme.• Loaded with finest top quality fiberglass parts & composite hardware. The battery compartment's roomy

Dimensions make it easy to access for quick battery changes. Quality lightweight materials – fiberglass wheel pants, landing gear, cowl & airfoil-shaped upper wing pylon. Not only is the Reactor Bipe expertly covered in metallic trim, it features an attractive, contemporary scheme. Die-cut decals are included for peel-&-press customization. While still being compact enough for easy transportation & spontaneous flying at a park or field, the Reactor Bipe is slightly larger & stronger than typical park flyers in its class. Specification Wingspan: 890 mm (35 in) Length: 1080 mm (43 in) Weight: 970-1085 g (34.2-38.2 oz) Radio System: 4-5 channels w/4 micro servos (Req.) Wing Loading: 25-28 g/dm² (8.3-9.3 oz/ft²) Wing Area: 38.7 dm² (600 in²) Manufacturer: Ripmax Model: Great Planes Reactor Bipe E-Performance 3D ARTF (A-GPMA1580)

...