Futaba S3003 Standard Servo 0.19s/4.1kg (P-S3003) Standard-size economy servo for general applications. ideal to be used with cars, power boats, yachts, electric & i.c.-powered aircraft & helicopters. Specification Weight:37.2g Voltage:4.8v/6.0v Dimensions:40.4 x 19.8 x 36mm Speed:0.19 sec/60° (6.0v) Torque:4.1 Kg/cm (6.0v) ...

Futaba S3010 Servo Std BB 0.16s/6.5kg (P-S3010) Medium duty, standard sized servo with that bit of extra power & speed. Ideal for sport applications. Single ball bearing. Specification: Weight: 41g Dimensions: 40 x 20 x 38.1mm Speed: 0.16 sec/60° (6.0v) Torque: 6.5 Kg/cm (6.0v) Voltage: 4.8v/6.0v ...

Futaba S3050 Servo Digital Mtl/ Gear 0.16s/6.5kg (P-S3050) This new digital servo gives the same high torque & speed as the very popular S3010 servo & then adds digital holding power & accuracy. With two ball bearings & metal gears, this versatile servo is ideal for a wide variety of applications. Specification: Weight: 48.8g Dimensions: 40.0 x 20.0 x 38.1mm Speed: 0.16 sec/60° (6.0v) Torque: 6.5 Kg/cm (6.0v) Voltage: 4.8v/6.0v ...

Futaba Servo HV Digital
- 0.16s/10.5kg (P-S3051HV) A competitively priced high voltage digital servo offering good speed & torque
...

Futama Tx/ Rx Ni Cad/ Ni-MH Charger 600/600m A (P-FBC32D/4) This new dual output charger has been developed to suit the new Futaba 6J & 4YF radios as they use lower voltage transmitter packs than most previous radios. Both outputs are suitable to charge 4.8 or 6.0v Ni-MH battery packs, with a charge current of 600m Ah & peak detect charge termination. Both output leads have standard Futaba sockets to suit receiver charging, but supplied complete with the charger is a transmitter adapter lead for use with the new lower voltage transmitters. Specification: Max Current: 600m Ah ...

FW-190 Additional Wood pack WPRC2089 Its the model voted for by RCM&E readers & Modelflying.co.uk members earlier this year as the subject they wanted to see turned into a plan feature & Tony has obliged by producing this imposing model. It flies exceedingly well too, better Tony thinks, than just about all his previous single-engine warbird designs & we can certainly testify to its easy going nature & smooth flying capabilities. This ones electric but an i.c. conversion should be pretty straightforward. Incidentally, the model uses E-flite electric retracts (the 1.20 size pair) for which the default leg length is just the right size.DATAFILEName: Focke-Wulf Fw 190 AModel type: W.W.II warbird Designed by: Tony Nijhuis Wingspan: 60” (1524mm) Fuselage length: 49.5" (1257mm) Wing area: 4.1sq. ft. (0.4sq. m) All-up weight: 8.25 lb (3.75kg) Wing loading: 32oz / sq. ft. (9.75kg / sq. m) Rec’d powertrain: 5065-380 size brushless motor, 6S 5000m Ah Li-Po (two 3S in series), 80A ESC. Functions: Ailerons, rudder, elevator, flaps, retracts (throttle via ESC). ...

FW-190 CNC Wood Pack CNCRC2089 Its the model voted for by RCM&E readers & Modelflying.co.uk members earlier this year as the subject they wanted to see turned into a plan feature & Tony has obliged by producing this imposing model. It flies exceedingly well too, better Tony thinks, than just about all his previous single-engine warbird designs & we can certainly testify to its easy going nature & smooth flying capabilities. This ones electric but an i.c. conversion should be pretty straightforward. Incidentally, the model uses E-flite electric retracts (the 1.20 size pair) for which the default leg length is just the right size.DATAFILEName: Focke-Wulf Fw 190 AModel type: W.W.II warbird Designed by: Tony Nijhuis Wingspan: 60” (1524mm) Fuselage length: 49.5" (1257mm) Wing area: 4.1sq. ft. (0.4sq. m) All-up weight: 8.25 lb (3.75kg) Wing loading: 32oz / sq. ft. (9.75kg / sq. m) Rec’d powertrain: 5065-380 size brushless motor, 6S 5000m Ah Li-Po (two 3S in series), 80A ESC. Functions: Ailerons, rudder, elevator, flaps, retracts (throttle via ESC). ...

FW-190 Complete Set SETRC2089 Its the model voted for by RCM&E readers & Modelflying.co.uk members earlier this year as the subject they wanted to see turned into a plan feature & Tony has obliged by producing this imposing model. It flies exceedingly well too, better Tony thinks, than just about all his previous single-engine warbird designs & we can certainly testify to its easy going nature & smooth flying capabilities. This ones electric but an i.c. conversion should be pretty straightforward. Incidentally, the model uses E-flite electric retracts (the 1.20 size pair) for which the default leg length is just the right size.DATAFILEName: Focke-Wulf Fw 190 AModel type: W.W.II warbird Designed by: Tony Nijhuis Wingspan: 60” (1524mm) Fuselage length: 49.5" (1257mm) Wing area: 4.1sq. ft. (0.4sq. m) All-up weight: 8.25 lb (3.75kg) Wing loading: 32oz / sq. ft. (9.75kg / sq. m) Rec’d powertrain: 5065-380 size brushless motor, 6S 5000m Ah Li-Po (two 3S in series), 80A ESC. Functions: Ailerons, rudder, elevator, flaps, retracts (throttle via ESC). ...

FW-190 Plan RC2089 by Tony Nijhuis Its the model voted for by RCM&E readers & Modelflying.co.uk members earlier this year as the subject they wanted to see turned into a plan feature & Tony has obliged by producing this imposing model. It flies exceedingly well too, better Tony thinks, than just about all his previous single-engine warbird designs & we can certainly testify to its easy going nature & smooth flying capabilities. This ones electric but an i.c. conversion should be pretty straightforward. Incidentally, the model uses E-flite electric retracts (the 1.20 size pair) for which the default leg length is just the right size.DATAFILEName: Focke-Wulf Fw 190 AModel type: W.W.II warbird Designed by: Tony Nijhuis Wingspan: 60” (1524mm) Fuselage length: 49.5" (1257mm) Wing area: 4.1sq. ft. (0.4sq. m) All-up weight: 8.25 lb (3.75kg) Wing loading: 32oz / sq. ft. (9.75kg / sq. m) Rec’d powertrain: 5065-380 size brushless motor, 6S 5000m Ah Li-Po (two 3S in series), 80A ESC. Functions: Ailerons, rudder, elevator, flaps, retracts (throttle via ESC). ...

FW-190 Vac Form Pack CANRC2089 NB: this is is Vac Form Pack only Its the model voted for by RCM&E readers & Modelflying.co.uk members earlier this year as the subject they wanted to see turned into a plan feature & Tony has obliged by producing this imposing model. It flies exceedingly well too, better Tony thinks, than just about all his previous single-engine warbird designs & we can certainly testify to its easy going nature & smooth flying capabilities. This ones electric but an i.c. conversion should be pretty straightforward. Incidentally, the model uses E-flite electric retracts (the 1.20 size pair) for which the default leg length is just the right size.DATAFILEName: Focke-Wulf Fw 190 AModel type: W.W.II warbird Designed by: Tony Nijhuis Wingspan: 60” (1524mm) Fuselage length: 49.5" (1257mm) Wing area: 4.1sq. ft. (0.4sq. m) All-up weight: 8.25 lb (3.75kg) Wing loading: 32oz / sq. ft. (9.75kg / sq. m) Rec’d powertrain: 5065-380 size brushless motor, 6S 5000m Ah Li-Po (two 3S in series), 80A ESC. Functions: Ailerons, rudder, elevator, flaps, retracts (throttle via ESC). ...