Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. The schooner Bluenose has a very special place in the history of navigation & yachting. Built to fish off the Newfoundland coast, the ship soon turned out to be such a fast sailer that she won all the great classical regattas along the USA’s Eastern coast. She was built in Nova Scotia in l 921, & shipwrecked near Haiti in 1946. A true copy
- Bluneose II
- was launched in l 964. Specifications: Height
- 67 Length
- 76 Width
- 14 Laser Cut Parts Not suitable for RCManufacturer: Billing Boats Model: BB576




...

Level: Beginner Model number: B600 Manufacturer: Billing Boats The schooner Bluenose has a very special place in the history of navigation & yachting. Built to fish off the Newfoundland coast, the ship soon turned out to be such a fast sailer that she won all the great classical regattas along the USA's Eastern coast. She was built in Nova Scotia in 1929, & shipwrecked near Haiti in 1946. A true copy
- Bluneose II
- was launched in 1964. Manufacturer: Billing Boats Model: BB600

...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. This original design can be seen in many ports along the French Channel. The boats are socalled stern trawlers, in which the net is pulled in using a tricing line in the rear of the boat. The hull is of steel; & the length is 11 m. Specifications: Height
- 39 Length
- 56 Width
- 20 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB534


...

Level: Expert Model Number: BB560 Manufacturer: Billing Boats The well-trained model builder will find many challenges
- & many
...

Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! RS 1 was built in 1893 for the " Norwegian Society for Shipwreck Salvage" at the Colin Archer shipyard in Rekkevig near Larvik, Norway. RS 1 was later named " Colin Archer" after its designer & builder. Specifications: Height
- 50 Length
- 47.5 Width
- 12.5 Laser Cut Parts Not Suitable for RC Manufacturer: Billing Boats Model: BB606


...

Level: Experienced Model Number: BB582 Manufacturer: Billing Boats This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! The first Dragen was built in 1929 in Gothenburg, Sweden. The sailing characteristics of the vessel were so fine that the boat soon was used throughout the world, & especially in Europe. As time passed, the Dragen was changed gradually, so that today only the hull is original. In 1948 the Dragen became an Olympic yachting class, & all measurements have been standardized by the International Sailsport Union. Specification: Height
- 100 Length
- 75 Width
- 18 Laser Cut Parts Static model suitable for R/C.


...

This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! MRB 20 " Emile Robin" was delivered from the North Sea Shipyard in Ringkøbing, Denmark, in 1989. The lifeboat was named after the Parisian merchant Emile Robin, a philanthropist, cognac manufacturer & vice-president of the French charity La Société Centrale de Sauvetage des Naufragés (Society for the Salvation of Shipwrecks). Emile Robin is one of the most important benefactors in the 150 year history of the Danish Lifeboat Service. MRB 20 " Emile Robin" is permanently stationed at the lifeboat station in Hvide Sande, on the western coast of Denmark. Specifications: Height
- 35 Length – 60.5 Width – 19 Laser Cut Parts 1/33RD Scale Plastic Hull Manufacturer: Billing Boats Model: BB430
...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. A typical Danish seiner, with a gross tonnage of 63.43 & built in 1929/1930 at the Nyborg Shipyard in Denmark. The ship was sold to the Faroe Islands in 1930 as the " Sjóstjørnan" TG II. After a period of 20 years with various owners & names, the ship was sold to Iceland in 1950, & was now called " Arnanes". Specifications: Height
- 57 Length
- 70 Width
- 12 Laser Cut Parts 1/50TH Scale Manufacturer: Billing Boats Model: BB701


...

Manufacturer: Billing Boats Model Number: BB472 Level: Advanced Beginner Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you The Mary Ann is the first model produced by Billing Boats in 1958. It has been modified 4 times during the years & changed names 3 times. The ship is a typical 45-ton cutter commonly seen in the harbour at Esbjerg, Denmark; often more than 600 cutters of this type can be seen at a time. The model kit is based on the original ship drawings. Specification: Height – 43 Length – 55 Width – 16 Laser Cut Scale
- 1:33 Static model not suitable for R/C.
...

This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! Götheborg is a replica of a vessel, owned by The Swedish East India Company, formed in 1731 in Gothenburg. The Swedish East India Company was trading tea, porcelain & silk in China. On the homeward voyage from China one of the Company’s ships foundered in 1745. When almost in home-port, the ship ran aground on a well-known underwater rock. It rapidly took on water & sank. The SOIC (Svenska Ostindiska Companiet) was formed in 1993 in order to recreate a copy of the foundered vessel. The Götheborg was built with the main

Dimensions, alignments, hull & rigging in conformity with a Swedish East Indiaman of the 18th century. The launching took place on June 6th, the Swedish National Day, year 2003. The maiden voyage is expected to depart from Gothenburg in 2005 & will take about two years. Specifications: Height
- 51 Length
- 58 Width
- 22.5 Laser Cut Parts Not suitable for RC Manufacturer: Billing Boats Model: BB432




...