CNCRC2075 Wittman Tailwind CNC Wood Pack Please note this is ONLY the CNC Woodpack The Wittman Tailwind is probably the most famous aircraft youve never heard of. Steve Wittmans cheap home-build cross-country sportster kick-started the home build boom in the 1950s & its still being built & flown today. Peter Millers 48" span model reproduces the Tailwinds pleasing lines & flies superbly well using a. 20-.25 two-stroke or four-stroke equivalent engine. The huge fuselage means an electric conversion should be easy to engineer too. The new CNC/ Laser-cut parts set speeds up the build process by reproducing the ribs, formers & other parts (apart from strip balsa) required for the model while a wood completion pack that

Includes:: the strip & sheet balsawood is also available. The cowl is made using balsa & ply. An electric conversion build blog can be found at www.modelflying.co.uk & builders can chat with designer Peter Miller in the friendly forum. Data File Name: Wittman Tailwind W-10 Model Type: Scale home-built Designed by: Peter Miller Wingspan: 48" Fuselage length: 39" Wing area: 360 sq in All-up weight: 66oz Wing loading: 26.4oz/sq ft Functions (servos): Aileron (2); elevator (1); throttle (1); rudder (1); flap (2) Recd Engine. 20-.25 two-stroke/. 26-.30 four-stroke

...

CNCRC2079 Pix-E Major CNC Wood Pack by Tim Hooper Please note this is the CNC woodpack only! Tim Hooper reinvents a classic Keil Kraft model that rekindles the spirit of aeromodellings gentler age. The 42" span Pix-E Major is for inexpensive electric power systems & three-channel control (rudder, elevator, throttle) & it flies a treat too! Its easy & relaxing to fly while very forgivving. Go on
- relive a design classic! Datafile Name: Pix-E Major Designed: Tim Hooper Wingspan: 42" Wing area: 232 sq. in. All-up weight: 13.5ozwing loading: 8.5oz / sq. ft. Functions: elevator, rudder, throttle Powersystem: 2408-21 size outrunner, 15-amp ESC, 2S 1300m Ah Li-Po battery, 9x 6 prop.
...

CNCRC2082 Jitterbug CNC Wood Jitterbug is an 'easy to build' low-wing trainer/aerobat designed by RCM&E's Alex Whittaker. It's ideal for first time builders & featured (with build photos) in the April 2011 issue of RCM&E. To see extra build photos & builders notes left by other Jitterbug builders just visit:www.modelflying.co.uk & see the the RCM&E plan builders forum section. Name: Jitterbug Model type: Sports aerobat Designed by: Alex Whittaker Wingspan: 62” Fuselage length: 43” Wing area: 651 sq. in. All-up weight: 6.5 lbs Wing loading: 23 oz / sq. ft. Functions (servos): Aileron (2); elevator (1); rudder (1); throttle (1) Rec’d engine. 46
-. 60 two-stroke. 53
-. 60 four-stroke Rec’d powertrain: Turnigy C5055-600 motor; 4s 3200m Ah Li-Po; 80A ESC

...

CNCRC2083 Airspeed Courier CNC Wood Pack NB: This is the laser cut wood parts only First published in RCM&E May 2011 Back to the 30s with Tim Hoopers take on a little-known six-seater Despite being largely ignored in the annals of British aviation, the Airspeed Courier was actually something of a minor landmark with its semi-retractable u/c, & served as the predecessor to the much better-known twin-engine Oxford & Envoy. Although the production run of 16 aicraft means it was hardly prolific, the 1933 Courier could be considered ahead of its time in several respects.A six seater cabin monoplane, with a range of over 500 miles in standard trim & featuring the aforementioned retracting u/c, the Courier also boasted a high-aspect ratio wing of around 47" span. The seven cylinder AW Lynx radial engine was encircled with a cowling, & endowed the Courier with a top speed of just over 150mph. Not bad going for 1933! ...

CNCRC2090 Mini Tyro combo woodpack set Please note this has both the laser cut parts & the additional woodpack as featured in the November 2011 RCM&E. Andrew Boddington refreshed this famous David Boddington 32" span (812mm) design in RCM& Es November 2011 issue. Its a classic, easy to build, sweet flying sportster designed for rudder/elevator/throttle & suits a 0.75cc diesel engine or a simple electric power system along with mini or micro servos. Check out the video at RCM& Es online home at www.modelflying.co.uk to see Andrew discussing & flying the model! Data File Name: Mini Tyro Model Type: Retro/ Vintage Designed by: David Boddington Wingspan: 32" (812mm) Fuselage length: 23" (584mm) Wing Area: 168sq. ft All-up Weight: 13oz (370g) Wing Loading: (11oz/ sq. ft.) Function Servos: Rudder (1), elevator (1), throttle (1) ...

Cobra Model Aircraft Plan (RC1360) The Cobra: A handy size
- 41 inch (1041 mm)
- span aerobatic slope soaring glider. Despite

...

Cobra RC Toys Large 3 Channel Apache Helicopter (L99234) Quick Overview Cobra RC Toys Large 3 Channel Apache Helicopter (L99234). Full 3D Flight & real helicopter performance. Perfect stability & precision speed. The perfect RC toy for outdoor playing.
MANUFACTURER: Cobra RC Toys Model: Large 3 Channel Apache Helicopter (L99234)
...

Quick Overview Large 3 Channel RC Helicopter. Full 3D Flight & real helicopter performance. Perfect stability & precision speed. The perfect RC toy for outdoor playing. Manufacturer: Cobra RC Toys Model: Large 3 Channel Big Shark Helicopter (L99133) ...

Quick Overview Large 3 Channel RC Helicopter. Full 3D Flight & real helicopter performance. Perfect stability & precision speed. The perfect RC toy for outdoor playing. Manufacturer: Cobra RC Toys Model: Large 3 Channel Comanche Helicopter (L99245) ...