More From Contributor

£6.95
CANRC2023 DH 98 Mosquito Vac Form Set Aircraft Type: Electric Semi-Scale Twin Designed By: Tony Nijhuis Wingspan: 38" All-Up Weight: 30oz Wing Loading: 14 oz/ sq.ft. Recd Motors: 2 X 400 6 V Recd Battery: 8 X 1300 CPRecd No Channels: 3 Control Functions: Aileron, Eevator, Throttle ...
Archived Product
£10.95
Zero Set

Includes::
Canopy & Cowl. Designed by: Tony Nijhuis Model Type: Electric Fun Fighters Tony Nijhuis

...
Archived Product
£10.95
Canopy & cowl for Corsair Designed by: Tony Nijhuis Model Type: Electric Fun Fighters Tony Nijhuis presents one of his duelling combatants (see RC2035 A6 Zero for companion combat plane) from the W.W.II Pacific Arena. One of the first of Tony's dogfight series to use brushless motors & Li-Po cells, this cracking little model uses an 'off the shelf' powertrain solution that's readily available. Canopy hatches on this aeroplane allows suitable access to the radio & battery. Ideal for a sunday afternoon flying this certainly conjures up imagery of the conflict in the south pacific. Why not buy both plans! Wingspan: 31 1/2 inch All-up Weight: 16-25oz Wing Loading: 15oz/sq.ft. Fuselage Length: 24 inch Rec'd Motor: AXI 2208/20 Silverline Rec'd Battery: 1050m Ah 2s 1p Li-Po Rec'd Propeller: APC 8 x 4 inch electric Rec'd ESC: 10amp (Li-Po compatible) Control Functions: Aileron, elevator, rudder, throttle. For kit build on this product by RCM&E Magazine please click on the logo below. ...
Archived Product
£9.99
The design features a fully built up construction using balsa & plywood. The wings are a built-up structure of ribs over a main spar & balsa sheeted. The tailplane is built up in a similar fashion to the wings. The model is design for brushless outrunner motors & 5S Lipo but possibly could be converted to 50-60 size IC power. The model is designed for retractable undercarriage. Designer: Tony Nijhuis Specification Wingspan – 1575mm /62” Length – 1257mm 49.5”IC Engine – 0.61 IC 4 Stroke Electric Motor – 5055-580 outrunner Radio – 6 Function AUW – 3855g / 8.5lbs For further details & the full article as published in the October 2008 RCM&E special click here. ...
Archived Product
£20.00
Designed by Tony Nijuhis In this set: Canopy, Turrets, cowls Kit build in this months RCM&E magazine. It's a lovely model, eye-catching with plenty of presence & another worthy addition to the Nijhuis stable of scale designs. The model spans 72" & is powered by four BRC Hobbies A2409-12T brushless motors that together generate 800 watts
- plenty sufficient to take the 8lb model aloft
- she'll take off from grass! Four servos are required, two for aileron with one each for elevator & rudder. Tony used four budget Hi Model 25amp ESCs & four 3S 2200m Ah Li-Po batteries.

...
Archived Product
£32.50
To accompany plans in Autumn Special 2009 RCM&EDesigner: Tony Nijhuis Specification Wingspan 1676mm / 66" Length 1257mm / 49.5" IC Engine 0.48/0.52 IC 4 Stroke Electric Motor 4-Max Recommended Radio 5 Function AUW 2720g / 6lbs Scale 1/9th For kit build Pictures of this product brought to you by RCM&E Magazine please click on the logo link below. ...
Archived Product
£38.99
CANRC2074 This is the Canopy & Cowl set for the Halifax MK 3. This is the latest Tony Nijhuis design brought to you by RCM&E magazine, which will be featured in the July 2010 issue of RCM&E, onsale on 4th June 2010. DATAFILE Name: Halifax Mk.III Model type: Scale W.W.2 bomber Designed by: Tony Nijhuis Wingspan: 104" (2625mm) Fuselage length: 77.5" (1965mm) Wing area: 9.2sq. ft. (0.9sq. m) All-up weight: 23 lb (10.4kg) Wing loading: 40oz / sq. ft. (12.2kg / sq. m) Functions (servos): Aileron (2), elevator (2), throttle (4), rudder (2), retracts (1), bomb doors (2), tail wheel (1) Rec'd engines: 4 x. 30 two-stroke /. 32 four-stroke ...
Archived Product
£39.95
Designer: LBSCStar Rating:A 3-½in gauge 0-4-0 locomotive. (Vols. 107-108). Based on the famous Invicta of the Whitstable & Canterbury Railway. Sheet 1 General arrangement & frames. Sheet 2 Cylinders & motion. Sheet 3 Smokebox & superheater. Sheet 4 Boiler, firebox & safety valve. Sheet 5 Steam pipe assembly & regulator. Sheet 6 Boiler erection, backhead fittings, exhaust pipe assembly. Sheet 7 Tender & details. Sheet 8 Tender pump, brake column, drawgear, brakegear. Complete set of 8 sheets. ...
Archived Product

CANRC2053 Cosmic Wind Canopy & Cowl Cheeks Set

CANOPY AND COWL CHEEK SET.The Tony Nijhuis Cosmic Wind as featured in the August 2009 issue of RCM&E magazine is a superb little sport aerobat or club racer. Finish the model with this clear canopy and cowl side cheeks. Name: Cosmic WindModel type: Semi-scale racersDesigned by: Tony NijhuisWingspan: 38.5” (978mm)Fuselage length: 34” (864mm)Wing area: 2.1 sq. ft.All-up weight: 40oz (1.1kg)Wing loading: 19oz / sq. ft. (5.8kg / sq. m)Functions (servos): Rudder (1); elevator (1); throttle (1); aileron (1)
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£13.99

Product Description

CANOPY & COWL CHEEK SET. The Tony Nijhuis Cosmic Wind as featured in the August 2009 issue of RCM&E magazine is a superb little sport aerobat or club racer. Finish the model with this clear canopy & cowl side cheeks. Name: Cosmic Wind Model type: Semi-scale racers Designed by: Tony Nijhuis Wingspan: 38.5” (978mm) Fuselage length: 34” (864mm) Wing area: 2.1 sq. ft. All-up weight: 40oz (1.1kg) Wing loading: 19oz / sq. ft. (5.8kg / sq. m) Functions (servos): Rudder (1); elevator (1); throttle (1); aileron (1)

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

August - The third season of the year after summer, before winter.
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Canopy - A covering that can be hung or held up, commonly found on beds.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu