About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Book 23 Workshop
Construction (WPS)
£6.95
Jim Forrest & Peter Jennings: A complete work on the construction methods used, this book contains the details for building the floor assembly, walls & roof & covers the peripheral areas including layout, planning regulations, tools, materials, cost savings, ideas, drainage, power supply lighting, heating, fitting out, security & insurance.210x 148mm 144 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 24 Electric
Motors In The Home
Workshop (WPS)
£6.95
Jim Cox: Detailed advice is given on how to identify & make good use of discarded & surplus motors from both domestic & industrial sources & also how to operate three phase motors from single phase supplies.210x 148mm 144 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 25 The Backyard
Foundry (WPS)
£6.95
Terry Aspin: This book covers basic principles, materials & techniques, pattern-making, moulding boxes, cores & core boxes, metals, electric, gas & coke furnaces. Step-by-step procedures are also included with examples of locomotive cylinders & wheels. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.210x 148mm 104 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 26 Home Workshop
Hints & Tips (WPS)
£6.95
Edited by Vic Smeed: A selection of useful hints & tips culled from a wide time-scale of the Model Engineer magazine as relevant today as when they were first printed.

Includes:: many helpful nuggets of knowledge which have appeared in brief notes or articles, often many years ago, & never republished until now. This book will interest & instruct anyone who works with metal.210x 148mm 128 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER









































...
Archived Product
image missing
Book 27 Spindles (WPS)
£6.95
Harprit Sandhu: Spindles describes the design construction & use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding & drilling spindles are covered along with a unique light gear cutting frame for clockmakers. The emphasis is not on heavy duty industrial grade spindles but rather on spindles that are easy to make & have as few parts as possible.210x 148mm 160 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 29 CAD For
Model Engineers (WPS)
£6.95
D.A.G. Brown: Derek Brown shows how by taking one step at a time the computer can soon be turned into a versatile drawing tool with many advantages over traditional drawing methods. In this book he seeks to strip away the mystique surrounding CAD by avoiding jargon & provides advice on how to choose & progress with the right system.210x 148mm 128 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 30 Workshop
Materials (WPS)
£6.95
Alex Weiss: This book describes the many & varied materials used by model engineers in their workshops such as ferrous & non-ferrous metals, hard & soft woods & a number of engineering & non-engineering plastics. It also contains details of abrasives, adhesives, bearing materials, ceramic & refractory materials, castings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants & solders.210x 148mm 192 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 31 Useful
Workshop Tools (WPS)
£6.95
Stan Bray: Workshop Practice series No. 31. A collection of fifteen invaluable additions to model engineer’s armoury of tools & equipment from the former editor of Model Engineer’s Workshop magazine. This practical collection covers benchwork, the lathe & milling operations.210 x 148mm 104 pages 30 B&W70 line drawings Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 32 Unimat III
Lathe Accessories
(WPS)
£6.95
Bob Loader: Workshop Practice Series No. 32. An acknowledged authority on the popular Unimat mini-lathe has developed numerous accessories & techniques to assist the model engineer in getting the best from the machine. The projects in this book increase the scope of the machine & advise in the performance of a number of tricky operations.210x 148mm 160 pages 160 B&W photos 70 line drawings Paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product
image missing
Book 33 Making Clocks
(WPS)
£6.95
Stan Bray: Workshop Practice Series No. 33. An introduction to the fascinating world of horology for the complete beginner. This book explains the terminology of the clockmaker & provides general details of clock construction including layout of wheels & escarpments, all of which are fully described & illustrated.210x 148mm 128 pages 100 B&W illustrations Paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER







































...
Archived Product

Book 28 Simple Workshop Devices (WPS)

Tubal Cain: Tubal Cain, who has enjoyed more than 60 years experience in designing and building engines and machines (in both full size and model) shares his experiences of making these ancillary devices. This is an updated edition of a previously published title, now introduced into the Workshop Practice Series, and is an essential addition to any model engineer's library.210x148mm 144 pages Illustrated paperback Other books in the series are also available:1 - Hardening, Tempering & Heat Treatment by Tubal Cain2 - Vertical Milling in the Home Workshop by Arnold Throp 3 - Screwcutting in the Lathe byMartin Cleeve4 - Foundrywork for the Amateur by Terry Aspin5 - Milling Operations in the Lathe by Tubal Cain6 - Measuring & Marking Metals by Ivan Law7 - The Art of Welding by W.A. Vause8
- Sheet Metal Work by R.E. Wakeford9 - Soldering and Brazing by Tubal Cain10 - Saws & Sawing by Ian Bradley11 – Electroplating by J.Poyner12 - Drills, Taps and Dies by Tubal Cain13 - Workshop Drawing 2nd Revised Edition by Tubal Caine14 - Making Small Workshop Tools by Stan Bray15 - Workholding in the Lathe by Tubal Cain16 - Electric Motors / Second Edition by Jim Cox17 - Gears and Gear Cutting by Ivan Law18 - Basic Benchwork by Les Oldridge19 - Spring Design and Manufacture by Tubal Cain20 - Metalwork and Machining Hints and Tips by Ian Bradley21 - Adhesives and Sealants by David Lammas22 - Workshop Electrics by Alex Weiss23 - Workshop Construction by Jim Forrest & Peter Jennings24 - Electric Motors in the Home Workshop by Jim Cox25 - The Backyard Foundry by Terry Aspin26 - Home
Workshop Hints & Tips by Edited by Vic Smeed27 – Spindles by Harprit Sandhu28 - Simple Workshop Devices by Tubal Cain29 - CAD for Model Engineers by D.A.G. Brown30 - Workshop Materials by Alex Weiss31 - Useful Workshop Tools by Stan Bray32 - Unimat III Lathe Accessories by Bob Loader33 - Making Clocks by Stan Bray34 - Lathework: A Complete Course by Harold Hall35 - Milling: A Complete Course by Harold Hall36 - Photo Etching by Brian King37 – Dividing by Harold Hall38 - Tool Cutting & Sharpening by Harold Hall39 - Model Engineers' Workshop Projects by Harold Hall40 - Book 40 Bearings By Alex Weiss41 - Grinding, Honing & Polishing by Stan Bray42 - Metalworker's Data Book by Harold Hall43 - The Mini-Lathe By Dave FennerBuy any 2 books from the Workshop Practice Series and get one
free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£6.95
books
Description Reviews / Comments Add New

Product Description

Tubal Cain: Tubal Cain, who has enjoyed more than 60 years experience in designing & building engines & machines (in both full size & model) shares his experiences of making these ancillary devices. This is an updated edition of a previously published title, now introduced into the Workshop Practice Series, & is an essential addition to any model engineer's library.210x 148mm 144 pages Illustrated paperback Other books in the series are also available:1
- Hardening, Tempering & Heat Treatment by Tubal Cain 2
- Vertical Milling in the Home Workshop by Arnold Throp 3
- Screwcutting in the Lathe by Martin Cleeve 4
- Foundrywork for the Amateur by Terry Aspin 5
- Milling Operations in the Lathe by Tubal Cain 6
- Measuring & Marking Metals by Ivan Law 7
- The Art of Welding by W.A. Vause 8
- Sheet Metal Work by R.E. Wakeford 9
- Soldering & Brazing by Tubal Cain 10
- Saws & Sawing by Ian Bradley 11 – Electroplating by J. Poyner 12
- Drills, Taps & Dies by Tubal Cain 13
- Workshop Drawing 2nd Revised Edition by Tubal Caine 14
- Making Small Workshop Tools by Stan Bray 15
- Workholding in the Lathe by Tubal Cain 16
- Electric Motors / Second Edition by Jim Cox 17
- Gears & Gear Cutting by Ivan Law 18
- Basic Benchwork by Les Oldridge 19
- Spring Design & Manufacture by Tubal Cain 20
- Metalwork & Machining Hints & Tips by Ian Bradley 21
- Adhesives & Sealants by David Lammas 22
- Workshop Electrics by Alex Weiss 23
- Workshop Construction by Jim Forrest & Peter Jennings 24
- Electric Motors in the Home Workshop by Jim Cox 25
- The Backyard Foundry by Terry Aspin 26
- Home Workshop Hints & Tips by Edited by Vic Smeed 27 – Spindles by Harprit Sandhu 28
- Simple Workshop Devices by Tubal Cain 29
- CAD for Model Engineers by D.A.G. Brown 30
- Workshop Materials by Alex Weiss 31
- Useful Workshop Tools by Stan Bray 32
- Unimat III Lathe Accessories by Bob Loader 33
- Making Clocks by Stan Bray 34
- Lathework: A Complete Course by Harold Hall 35
- Milling: A Complete Course by Harold Hall 36
- Photo Etching by Brian King 37 – Dividing by Harold Hall 38
- Tool Cutting & Sharpening by Harold Hall 39
- Model Engineers' Workshop Projects by Harold Hall 40
- Book 40 Bearings By Alex Weiss 41
- Grinding, Honing & Polishing by Stan Bray 42
- Metalworker's Data Book by Harold Hall 43
- The Mini-Lathe By Dave Fenner Buy any 2 books from the Workshop Practice Series & get one free.CLICK HERE TO ORDER YOUR 3 FOR 2 BOOK OFFER

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Electric - A general term for the flow of electric charge
Heat - A term used to define thermal energy
engineer - A professional engineering practitioner concerned with developing solutions for technological systems problems.
honing - A process for final surface finishing. Abrasive stones are used to remove minute amounts of material from a surface.
grinding - A process for finishing an object to improve the finish of the surface
cutting - The seperation of an object usually using a cutting tool such as a knife
Size - is the measurement of how big an object is in space.
Small - something that takes up less space than normal.
Welding - A process where materials are melted together, usually metals or thermoplastics.
Treatment - A way in which medics care for patients illnesses. A manner which someone behaves to someone else.
Bearings - A direction or a way someone moves around.
Simple - Basic, easy no difficulty in understanding.
Home - A place of permanent residence for families.
Experience - To gain further knowledge by practising.
Design - A drawing or styles that shows the look and functionality of something before its made.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu