With the addition of the automatic Robomow RS630 to your garden-machinery collection, you’ll be able to relax during your free time, rather than walking up & down for hours behind an old-fashioned manual machine. Once the base-station has been positioned & the perimeter wire laid-out, almost no human interaction is required – all you need do is programme in your lawn-size; select the day & time you’d like your lawn to be mown, & the Robomow will do the rest. It will go back to its base station if the battery is low, or if rain is detected. The Robomow RS630 Automatic Robot Lawn Mower comes with a high-powered 6 Ah (26v) brushless motor, which has numerous advantages over brushed units, including more torque per watt; reduced sound-output; enhanced reliability; & long-life (the battery will last for around 2000 charge-cycles; & gives a run time of one-&-a-half-hours on a two-hour charge). Fitted with a pair of seriously sharp blades that provide a 56cm width-of-cut, the Robomow RS630 is suitable for grassed up to 3000m 2. The blades repeatedly shred clippings as they’re held under the mower-deck, with the resulting mulch spread evenly over the lawn surface where it will rot & disappear in quick-time, in turn leaving the grass debris-free & well-fed. So as to reduce the amount of follow-up work you’ll need to do with your grass-trimmer, the blades on the Robomow RS630 cut beyond its wheel-line. It has a variable cutting-height (20- 80mm), so you can make adjustments to suit your preferred grass-length; & it features pin-code theft protection that renders theft of the machine pointless. Three sensors are provided: a damp-sensor that will see it return to base should it start to rain; a bump-sensor, which ensures it will manoeuvre its way around any obstacles it encounters; & a safety-optimising tilt/lift-sensor that stops the blades if the unit is angled and/or picked-up. Should you wish to operate the Robomow RS630 manually, you can purchase the optional remote control.
Includes:: 2 blades; 500 pegs; 450m perimeter wire; 20m power-cable; Robo Ruler; manual; DVD; Li-Fe battery 6 Ah; 6 metal pegs for base-station; base station