This water pump is ready to take on jobs where water is packed with high concentrations of debris, sand or gravel, like floodwater or silted water from building sites & quarries, allowing the water through without clogging or blockages. It can handle water with solids of up to 24 millimetres. Durable & very heard wearing this pump as a cast iron, abrasion resistant impeller. This impeller has a special conical design that also contributes to wear reduction. The engine is a Honda GX160, 4-stroke, single cylinder, OHV version for economically sound power with reduced emissions & decompression to reduced the amount of pull force required. The engine is rubber-mounted, with 45° inclined mounts for superior damping of vibrations & reduction of vibration caused mechanical wear & tear. The pump can shift high volumes of liquid, 710 litres per minute (42, 600 per hour) & has a total head (max lift) of 30 metres. The included oil-alert system shuts down the engine if the oil level falls below a safe, pre-set limit; this protects the engine from damage. A tough, durable steel frame surrounds the pump & engine to protect it, stabilise it & make moving the unit much easier. An integrated & reliable recoil pull & transistorised ignition mean an easy start every time. A removable inspection cover means inspections & cleaning & maintenance of the pump are easy, including easy debris removal. ...

With practical characteristics like portability & compactness this lightweight but powerful pump is an ideal machine for homeowners, leisure users, boat owners or anyone else that needs to shift clean water, or even or muddy water with solids up to 6mm. A 25cc, GX25, 4-stroke, OHV, single-cylinder engine provides the power to this pump; it is efficient, powerful & very reliable, easy starting & has automatic decompression that will reduce the pulling force required. Thanks to the engine’s overhead valve, performance is higher, fuel costs are lowered & energy is cleaner. In fact, the engine meets stringent EN20006 emission standards. When it comes to volume, this model can shift 140 litres per minute (8400ph) & has a suction head of 8m (the height between source water level & the pump) with 3.6bar of pressure & a total head, or lift of 36m. This pump is specially designed with a 360° function so it will work at any angle & any incline, giving you total flexibility when placing it in situ, & a useful integrated handle for easy transport is built it. A full fuel tank of 0.55 litres delivers an operating time of around 1h 20min. The pump is stabilised & grounded on a solid base with rubberised feet to lower vibration & construction is robust & of high quality all round. This pump comes with a 2-year domestic & 1-year commercial warranty. ...

The Husqvarna 122HD-60 is solidly-built yet lightweight hedgetrimmer, ideal for day-to-day use around the yard & garden. Its dependable 21.7cc two-stroke engine benefits from the employment of Smart Start, which reduces the required pulling-force on the starter-cord by an impressive 40-percent. An air-purge pump ensures ignition is consistently reliable. Featuring 60cm double-sided, dual reciprocating blades with ultra-sharp teeth, the Husqvarna 122HD-60 Petrol Hedgetrimmer will enable you to cut-back your hedges with speed & efficiency. The sharpness of the cutting-teeth also helps to extend product life. Despite its rugged build-quality, the Husqvarna 122HD-60 weighs-in at a mere 4.9kg. Its low-weight build combines with its well-balanced design & vibration-dampers to ensure you’ll have no handling problems. ...

Combining superior ergonomics with solid build-quality & excellent cutting-performance, the Husqvarna 123HD-65X excels at lighter-duty commercial hedge-trimming applications. Its 60cm double-sided, dual-reciprocating blades ensure a fast work-rate; while its rotating rear-handle makes it possible to tackle the sides & tops of hedges with ease. This lightweight machine (it weighs just 5.2kg) also features Husqvarna’s Low Vib technology, whereby a series of shock mounts serve to keep vibration levels to an absolute minimum. Power comes from a 22.5hp two-stroke engine with Smart Start & a fuel pump for dependable starting with minimal effort. ...

The Husqvarna 123HD-65X has been developed for more demanding homeowner use & lighter-duty professional applications. Its powerful & reliable 22.5cc engine benefits from the incorporation of an air-purge pump & a fuel-pump, so starting couldn’t be more dependable. Husqvarna’s Smart Start system reduces resistance on the starter-rope by 40-percent. Equipped with 60cm double-sided, double-reciprocating blades with ultra-sharp teeth, the Husqvarna 123HD-65X Petrol Hedgetrimmer offers high levels of productivity & an exceptionally clean cut. A twistable rear handle means that you can work at the most convenient angle for the task at hand & makes the creation of more complex shapes a whole lot easier. It might be powerful & solidly built, but Husqvarna have managed to keep the weight of this model down to just 5.2kg. These weight reduction measures combine with comprehensive vibration damping & an optimised centre-of-gravity to make it a pleasure to work with. ...

The Husqvarna 128C is a powerful, lightweight & easy-to-handle strimmer, ideal for light-duty homeowner use. It’s fitted with an environmentally-sound 28cc E-TECH® II engine, which features Smart Start for effortless ignition; & it’s equipped with a bump-feed line head, so reeling-out new line is fast & hassle-free. This competitively-priced machine has a comfortable ‘loop’ handle & weighs only 4.4kg, so it’s easy to control & manoeuvre. A robust, braided-wire cable-drive ensures more efficient power-transfer. ...

Some curved-shaft petrol grass-trimmer can be woefully underpowered – not so the Husqvarna 128C. It’s driven by a high-performance 28cc engine, power from which is sent to the cutter-head via a heavy-duty braided wire for increased torque. The engine itself is an exceptionally clean-running E-TECH® II unit, which has been developed to meet emissions regulations without compromising on power output. Husqvarna’s Smart Start recoil ignition works with a fuel-pump to ensure starting is reliable & requires almost no effort. The Husqvarna 128C Petrol Grass-Trimmer is perfect for homeowner applications, like trimming borders, tidying fence-lines, & maintaining confined areas that you can’t access with your mower. It combines a long-reach curved shaft with an ergonomic ‘loop’-type handle, which make it easy to guide accurately across the grass; & it weighs-in at a mere 4.4kg, so operator-fatigue is kept at bay for longer. This model also features a bump-feed cutter-head; a handy feature which means that you can spool-out fresh line by simply tapping the head on the ground – there’s no need to set the strimmer down. The nylon line is quick-&-easy to replace when you run out. ...

This high-performance petrol brushcutter from Husqvarna might be the Swedish manufacturer’s entry level machine, but that certainly doesn’t mean it skimps on power or build-quality. Driving it is a beefy 28cc two-stroke engine that produces a substantial 1.1hp (0.8k W); & which boasts Husqvarna’s Smart Start ® recoil system, whereby the resistance in the starter-rope is reduced by a huge 40% for low-effort ignition. The Husqvarna 128LDX Petrol Brushcutter combines high-torque bevel-gearing with a heavy-duty braided-wire drive to ensure thick, damp grass won’t stand a chance. It comes equipped with a ‘ Tap ‘n’ Go’ trimmer-head, which means you won’t have to waste time with manual line-feed (simply tap the head on the ground); & it has a split shaft that allows for space-saving transportation & storage. Weighing only 4.9kg & fitted with an ergonomic ‘loop’ handle, the Husqvarna 128LDX is comfortable to work with & easy to control. Husqvarna’s renowned anti-vibration measures ensure user-fatigue is kept at bay for as long as possible. The following quick-fit attachments are available: Sweeper; Edger; Cultivator; Blower; Hedgetrimmer. ...