The new Cub Cadet Wide Cut-E walk-behind mower will suit anyone with a large area of grass that it is not suitable to use a tractor on. The 33"" cutting deck can be used in either side-discharge or mulch mode depending on which is most applicable at the time. Large grip rear wheels are powered by a Briggs & Stratton 10.5hp petrol engine with electric key-start & the castor mounted front wheels ensure ultimate manoeuvrability, even turning on the spot if necessary which is made easier with the reinforced handlebars. Equipped with a 4-speed transmission & reverse gear this mower is built with hard use in mind. SAVE £200! PLUS! 6 MONTHS 0% FINANCE AVAILABLE 0N THIS MACHINE! CALL 0845 4588 905 NOW FOR MORE DETAILS! ...

This heavy-duty wide-cut lawn mower from Cub Cadet is the perfect choice for those maintaining large areas that would be difficult to access with a bulky garden-tractor. It gives you the choice of either mulching or side-discharging clippings, so is as good-a performer on long, damp grass as it is on short, dry grass. The working width is a generous 84cm. The Cub Cadet Widecut-E offers the coveted zero-turn capability, which not only optimises manoeuvrability, but also saves your valuable time as you can turn on the spot at the end of each pass. It features a five-speed transmission, which

Includes:: a reverse gear for backing-out of tight spots; & it’s equipped with a pair of extra-large diameter drive-wheels with a ‘ Motocross’-style tread-pattern for maximum traction on tricky surfaces. With its ultra-dependable Briggs & Stratton single-cylinder engine developing a huge 10.5hp, the Cub Cadet Widecut-E Zero-Turn Lawn Mower has the power to take-on the toughest mowing applications. An electric key starter eliminates the starting-headaches that are so common with conventional recoil-type ignition-systems.

...

If you’re an estate manager or commercial contractor looking for an exceptionally fast & efficient way to cover very large areas, then this high-

Specification, zero-turn ride-on mower from Cub Cadet is the machine for you. Until now zero-turn ride-ons have used levers to steer with – not so this model. Cub Cadet’s innovative Synchro Steer™ technology means that you can control the front castor-wheels using the steering-wheel. This, in conjunction with an independent drive to each of the rear-wheels, gives you the sought-after Zero-Turn capability. The superior manoeuvrability that the Cub Cadet Z-Force S48 provides will enable you to get the job done in around half the time of a conventional ride-on, as you’ll be able to zip around obstacles & turn on the spot & the end of each pass. A premium quality 22hp pressure-lubricated Kawasaki engine offers an impressively lengthy working-life & delivers power smoothly & efficiently across the rev-band; while a dedicated rear-wheel hydrostatic-drive provides infinitely-variable speed control (both forward & reverse) using a convenient foot-pedal. Built to cope easily with the rigours of intensive commercial use, the Cub Cadet Z-Force S48 is constructed around a computer-designed 1.5-inch welded-steel frame & has an 11-gauge steel deck. Its pivoting front axle & 120cm floating cutter-deck work to ensure the blades closely follow the contours of the ground for a consistent cut; while its wide-stance & low-centre of gravity ensure you’ll have no problems working on slopes & undulating terrain. Gauge wheels on the deck help to prevent scalping; & electronic blade-engagement ensures wear is minimised. Other features on this fantastic machine include the Smart Jet™ deck-wash system, which makes it easy to clean the deck underside after mowing; & an adjustable high-back seat (with arm-rests) which can be set-up to suit any operator.

...

The Cub Cadet Z-Force S48 is a genuinely ground-breaking machine. Unlike other zero-turn ride-ons, which are steered using a set of levers, the front castor-type wheels on this highly innovate mower are controlled using the steering wheel. This feature works with a separate drive to each of the rear-wheels to ensure you’ll be able to manoeuvre nimbly & intuitively around obstacles & then turn effortlessly through 360° at the end of each run. Dubbed Synchro Steer™, this advanced technology can reduce mowing-time by an impressive 50-percent. Thanks to its beefy 22hp Kawasaki twin-cylinder engine, the Cub Cadet Z-Force S48 offers unrivalled performance, fuel-economy & reliability. Full-pressure lubrication ensures key parts are kept constantly & efficiently oiled, even on steep inclines; & an electric-starter makes ignition a speedy, stress-free operation. Cast-iron cylinder-sleeves work with the full-pressure lubrication system to significantly extend the engine’s working-life. The foot-controlled twin hydrostatic-drive on the Cub Cadet Z-Force S48 Zero-Turn Ride-On Mower gives you smooth, jerk-free control of the ground-speed in much the same way as an automatic gearbox on a car (press on the rear of the pedal & the mower will go into reverse). This feature combines with the zero-turn capability & Synchro Steer™ system to make this model the most manoeuvrable machine of its type available. Boasting a 1.5-inch welded steel box-frame & an 11-gauge steel cutter-deck, the Cub Cadet Z-Force S48 is well equipped to cope with the demands that the commercial operator will place on it. The deck itself is floating, ensuring a neat, uniform cut; & it’s fitted with four gauge wheels to prevent scalping as you turn. It has three blades with a huge cutting-width of 120cm (48”). Ostensibly a side-discharge machine, this versatile ride-on can also be used with the optional mulch-kit or grass-collector. An adjustable height-of-cut (25 – 100mm) serves to further enhance flexibility of use. With its large-diameter front castor-wheels & extra-wide tractor-style drive-wheels, the Cub Cadet Z-Force S48 develops enough traction to perform effectively in the most adverse conditions. Its wide wheelbase & low-centre of gravity provide stability on slopes & rough ground; while its pivoting front-axle ensures the finish is attractively manicured with no missed patches. Other premium features include an electronic power take-off for smooth, wear-free blade engagement; a high-back seat with armrests & a compression spring for maximum operator-comfort; & Cub Cadet’s patented Smart Jet™ deck-wash system, which ensures you’ll have no problems keeping the blades & the underside of the deck free of clumped, performance-inhibiting clippings. ...

Honda engines, aluminium decks, full width steel rollers, single lever height adjustment & 4-Speed transmission means that with these mowers you can now have the highest specifications at very affordable prices! Castel's new CSP range of roller mowers have been carefully designed & tested to care for large areas of fine grassland & have been fitted with smooth running, quiet 5.5hp Honda engines. The lightweight high performance cutter deck carries a twenty year guarantee against corrosion for peace of mind. Inset front wheels running on double bearings give superb manoeuvrability while the full width steel roller enables you to cut right up to borders & lawn edges as well as leave that sought after striped effect. A seven position, single lever height adjuster allows easy settings to be achieved according to conditions, whilst the large canvas collector (60 litres) can be lifted through the handlebars for ease of use. The control lever requires only slight pressure to operate, making these mowers comfortable to use during long working periods. Four speed ' Change on the Move' transmission is featured to enable the optimum ground speed to be achieved. This premium rear roller model has a big 21""/53cm cut & is suitable for large areas of grass. The Honda powered CSPR53R is equally at home in the more formal domestic garden or when used for long periods by the more serious operator. Its quality & performance will be appreciated from the outset & will leave your lawn looking immaculate regardless of conditions. SAVE OVER £100! FREE OVERNIGHT DELIVERY! 1 YEAR WARRANTY. ...

This all new Mini-Rider from Castel Lawn King is one of the lowest priced sit-on mowers we could find! It features a 24.5"" (62cm) cutting deck with single blade & five separate heights of cut between 30mm
- 75mm. Equipped with a 6.5 hp Briggs & Stratton engine, the Castel Lawn King XE70 ride-on mower has 3 forward & 1 reverse gear for easy movement around beds, trees & other obstacles. The large sized 140 litre fabric grass collector means you'll be able to cover more ground with less stops to empty the cuttings. Easy to use, comfortable to ride, the XE70 is ideal for maintaining small & medium sized gardens in less time than a walk behind mower &, of course, in greater comfort! Plus the XE70 also comes with a electric key start to save on pulling! PLEASE NOTE: THIS ITEM IS PACKED FOR HOME ASSEMBLY. NOT SUITABLE FOR LONG GRASS OR ROUGH GROUND. FREE DELIVERY 2-3 DAYS! 1 YEAR MANUFACTURER'S WARRANTY.
...

The Castel Lawn-King XPE37EL Push-Type Electric -Lawnmower is equipped with a powerful 1100w motor & has a cutting width of 33cm
-
...

Powerful, simple to operate & highly-manoeuvrable, this lightweight yet robust mains-driven mower from Castel Lawn King is the ideal work-partner for those undertaking small-scale lawn maintenance. It employs a high-performance 1100w induction motor that has been selected for its durability & high-torque operation; & which features a safety-switch to guard against accidental start-up. A 10-metre power-lead provides ample freedom-of-movement. The Castel Lawn King XPE37EL Electric Four-Wheel Lawn Mower is a push-type machine with a narrow 33cm cut; a combination that makes it easy to guide around & between obstacles. It has a three-step height-of-cut (22 – 55mm), so you can make adjustments to suit the conditions; & it features a centre-folding handlebar, which can be collapsed to help save space in the storage area. The deck & grassbox on this model are both made from impact- & rust-resistant polypropylene. ...

Equipped with a powerful 1300w motor, the Lawn-King XPE41EL Push-Type Electric Lawnmower has a cutting-width of 37cm, making it ideal for the small-medium sized lawns. Easy to use, clean-running & lightweight (only 14kg), the Lawn King XPE41EL features a three-stage cutting-height (25
- 55mm) allowing you to get great results, even in difficult conditions; A robust polypropylene grassbox is included.
...

Simple but highly effective, the Castel Lawn King XP41EL will prove a fantastic purchase for those seeking a speedy, hassle-free way to keep a small- to medium-sized lawn neat & tidy. Key to its superior cutting-performance its high-performance 1300w electric motor, which sends enough torque to the blade to ensure you’ll have no trouble mowing longer grass. A safety-switch eliminates the risk of unintentional start-up. Thanks to its lightweight construction (14kg); large-diameter rear-wheels; & relatively narrow 37cm-cut, the Castel Lawn King XPE41EL Electric Four-Wheel Lawn Mower couldn’t be easier to manoeuvre. It gives you the choice of three preset height-of-cut (25 – 55mm), so you can choose the one that best suits the conditions; & it’s equipped with a centre-folding handlebar, which will save you significant space in the storage area. For impact- & corrosion-resistance, the grass-collector & cutter-deck on this model are both made from strong & durable polypropylene. A lengthy 15m cable is included (with plug). ...