X-702 model has been upgraded to become the X-702 GT. This full-face Touring helmet with an X-lite composite fibre shell is available in 4 outer shell sizes & is now even more comfortable, thanks to a new liner in choice fabrics & a new cheek pad configuration. The X-702 GT has been conceived with an ultrawide visor enabling a wider field of vision. Its Pinlock®, anti-fog inner visor, a VPS sunscreen & set up for the N-Com®, X-Series BX4 PLUS communication system complete the outfit of this superb helmet. With its full ventilation system (Touring Ventilation System), it offers optimum comfort even during long trips & in the most extreme conditions.

Details: Outer Shell made from Composite Fibre Four Outer Shell XXS-S, M, L, XL-XXXL TVS Touring Ventilations System top air intake front air intake chin air intake side air intake visor air intake rear air extractor Eyewear Adaptive VPS (Vision Protection System) Sunvisor Breath Deflector Wind Protector Lining/cheekpads removable washable breathable antibacterial Quick Release Visor Ultrawide Visor Double Action Device allowing the visor lock to prevent accidental visor opening at high speeds DD-Ring closure homologation UN/ECE 22.05
- Europe DOT FMVSS no. 218
- USA AS/NZS 1698
- Australia &, New Zealand JIS T 8133:2007 &, MFJ
- Japan SISIR SS9
- Singapore KS G 7001
- South Korea NBR 7471
- Brazilia SNI 1811-2007
- Indonesia









...

X-702 model has been upgraded to become the X-702 GT. This full-face Touring helmet with an X-lite composite fibre shell is available in 4 outer shell sizes & is now even more comfortable, thanks to a new liner in choice fabrics & a new cheek pad configuration. The X-702 GT has been conceived with an ultrawide visor enabling a wider field of vision. Its Pinlock®, anti-fog inner visor, a VPS sunscreen & set up for the N-Com®, X-Series BX4 PLUS communication system complete the outfit of this superb helmet. With its full ventilation system (Touring Ventilation System), it offers optimum comfort even during long trips & in the most extreme conditions.

Details: Outer Shell made from Composite Fibre Four Outer Shell XXS-S, M, L, XL-XXXL TVS Touring Ventilations System top air intake front air intake chin air intake side air intake visor air intake rear air extractor Eyewear Adaptive VPS (Vision Protection System) Sunvisor Breath Deflector Wind Protector Lining/cheekpads removable washable breathable antibacterial Quick Release Visor Ultrawide Visor Double Action Device allowing the visor lock to prevent accidental visor opening at high speeds DD-Ring closure homologation UN/ECE 22.05
- Europe DOT FMVSS no. 218
- USA AS/NZS 1698
- Australia &, New Zealand JIS T 8133:2007 &, MFJ
- Japan SISIR SS9
- Singapore KS G 7001
- South Korea NBR 7471
- Brazilia SNI 1811-2007
- Indonesia









...

X-702 model has been upgraded to become the X-702 GT. This full-face Touring helmet with an X-lite composite fibre shell is available in 4 outer shell sizes & is now even more comfortable, thanks to a new liner in choice fabrics & a new cheek pad configuration. The X-702 GT has been conceived with an ultrawide visor enabling a wider field of vision. Its Pinlock® anti-fog inner visor, a VPS sunscreen & set up for the N-Com® X-Series BX4 PLUS communication system complete the outfit of this superb helmet. With its full ventilation system (Touring Ventilation System), it offers optimum comfort even during long trips & in the most extreme conditions.

Details: Outer Shell made from Composite Fibre Four Outer Shell XXS-S, M, L, XL-XXXL TVS Touring Ventilations System top air intake front air intake chin air intake side air intake visor air intake rear air extractor Eyewear Adaptive VPS (Vision Protection System) Sunvisor Breath Deflector Wind Protector Lining/cheekpads removable washable breathable antibacterial Quick Release Visor Ultrawide Visor Double Action Device allowing the visor lock to prevent accidental visor opening at high speeds DD-Ring closure homologation UN/ECE 22.05
- Europe DOT FMVSS no. 218
- USA AS/NZS 1698
- Australia & New Zealand JIS T 8133:2007 & MFJ
- Japan SISIR SS9
- Singapore KS G 7001
- South Korea NBR 7471
- Brazilia SNI 1811-2007
- Indonesia









...

The use of highly sophisticated materials such as Carbon, Kevlar® & glass is sometimes not enough to guarantee special performances. ...

The use of highly sophisticated materials such as Carbon, Kevlar® & glass is sometimes not enough to guarantee special performances. ...

The use of highly sophisticated materials such as Carbon, Kevlar® & glass is sometimes not enough to guarantee special performances. ...

The use of highly sophisticated materials such as Carbon, Kevlar® & glass is sometimes not enough to guarantee special performances. ...

X-801RR perfectly combines great aerodynamics & comfort, & is lightweight to wear. To maximise the exterior design of the helmet, new stainless steel inserts have been added to the visor mechanism & the air intakes. The two independently activated air intakes convey part of the air directly into the helmet in evenly distributed channels, allowing the circulation of air inside the helmet, & preventing local infiltration of cold air. The remainder of incoming air, which is directed to the upper aerator, flows towards the rear section expelling stale air from the helmet. Air change is thus assured through the two stabilizing spoilers. Features The X-801RR is a high quality painted lightweight composite fiber shell (carbon, Kevlar, Kural & fiberglass), with Hi-Brite protective clear-coat. Optically correct, tool-less quick-change Lexan® face shield, total UV protection. Multi position anti-scratch flat racing shield, ready for NFR antifog insert, equipped with tear-off pins. Fully removable & machine washable interior. Sanitized anti-microbial hypoallergenic interior. Double D-Ring Retention System. Snell M2000 & DOT approved Manufacturer Art.: X801H560 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

X-802 represents the culmination of years of experience in the top levels of motorcycle racing competitions. Each component (shell, visor, liner, & ventilation system) is the product of innovative development, aimed at providing a product with constant quality & perfect performance. Each part was carefully designed considering top performance & developed along an experimental & test scheme in the Moto GP. Already at the beginning of the 2008 motorcycle racing season, Casey Stoner, Jorge Lorenzo, & other riders tested & experimented many of the innovative technical solutions found on this helmet which is now available for the most serious & demanding riders. Triple shell: Like many of the X-lite products, X-802 benefits from the advantages that come from using three different measurements of outer shell for the six available helmet sizes (XS/S, M/L, XL/XXL). This way, the helmet’s weight & volume (and hence its aerodynamic resistance) are kept to a minimum, proportionate to the rider’s size. New visor: The visor of the X-802 is completely new, with conspicuous design innovations that result in an impressively wide field of vision & an excellent rotation mechanism, which benefits all movements for opening, closing, & application of the Nolan Top Fog Resistant system (the standard inner visor with a fog-resistant siliconesealed profile). The curved outer surface model is equipped with this system, & it is also available in the flat model that is fit for the use of outer tear-off visors. The new visor is flanked by the rotational mechanism that has been fit on all X-lite full-face helmets for a number of years. The mechanism is light, reliable with a tool-free quick release visor, 4 mm adjustment of the air draught between the visor & the window trim, & Double Action. Removable comfort padding in unitherm: The UNITHERM fabric used to make the padding of the X-802 is the top in comfort. It is the most up-to-date elasticised microfibre that actively regulates breathability by rapidly dispersing perspiration. The removable cheek pads offer the greatly appreciated STEADYFIT, essential to maintaining the helmet steady at high speeds thanks to its triple differentiated density configuration, which provides excellent comfort even under conditions of substantial cheek pressure. Adjustable stability device (ASD): An innovative aerodynamic adjustable rear spoiler is integrated in the shell. The product of experience & testing in the wind tunnel & on track, the new spoiler optimizes the helmet’s aerodynamics, stabilizing it at high speeds, & assists the extraction of hot air from the interior through outlet vents integrated directly in the spoiler. Its profile, & thus its aerodynamics, can be adjusted to one of the two available configurations to better suit riders’ different positions & styles. Features Carbon Kevlar & Glass Composite shell 3 shell size options Fog resistant inner visor Removable linings Integrated vent system 5 year guarantee Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Cheek pads for the following helmet: X-802 cheek pads helmet Size cushion thickness XS 35mm S 30mm M 35mm L 30mm XL 25mm XXL 20mm ...