Helmet Technology Shell Design: An aerodynamic shell design constructed using advanced fiberglass reinforced plastic (FRP) for light weight & strength Cone-Head EPS: Advanced Cone-Head ® ultra light weight EPS protection system, allows helmets to be Engineered, lighter & fit closer to the head Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system Ventilation: 9 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 6 exhaust vents Inner Sun Shield: Flip down inner smoke shield with easy to use side actuation lever This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-105 weighs 1.59kg or 3.5 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 47 42 37 42 37 27 Comfort Liner Thickness (mm) 16 14 12 14 12 10 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Helmet Technology Shell Design: An aerodynamic shell design constructed using advanced fiberglass reinforced plastic (FRP) for light weight & strength Cone-Head EPS: Advanced Cone-Head ® ultra light weight EPS protection system, allows helmets to be Engineered, lighter & fit closer to the head Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system Ventilation: 9 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 6 exhaust vents Inner Sun Shield: Flip down inner smoke shield with easy to use side actuation lever This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-105 weighs... ...

Helmet Technology Shell Design: An aerodynamic shell design constructed using advanced fiberglass reinforced plastic (FRP) for light weight & strength Cone-Head EPS: Advanced Cone-Head ® ultra light weight EPS protection system, allows helmets to be Engineered, lighter & fit closer to the head Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system Ventilation: 9 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 6 exhaust vents Inner Sun Shield: Flip down inner smoke shield with easy to use side actuation lever This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-105 weighs 1.59kg or 3.5 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 47 42 37 42 37 27 Comfort Liner Thickness (mm) 16 14 12 14 12 10 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Features An aerodynamic shell design constructed using an advanced ultra light weight polly-alloy for light weight & strength Cam pivot, chin bar linkage system with latches for ease of movement & security A flush-fit, side-coverless face shield that is optically correct, compound-curved, scratch-resistant Quick release shield ratchet system Flip down inner smoke shield with easy to use side actuation lever 4 points of aerodynamically designed flush fit ventilation with chin, top (left & right) & unique rear exhaust vents. 3 intake vents & 1 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-111 weighs 1, 60kg or 3, 50kg Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the EC... ...

Features An aerodynamic shell design constructed using an advanced ultra light weight polly-alloy for light weight & strength Cam pivot, chin bar linkage system with latches for ease of movement & security A flush-fit, side-coverless face shield that is optically correct, compound-curved, scratch-resistant Quick release shield ratchet system Flip down inner smoke shield with easy to use side actuation lever 4 points of aerodynamically designed flush fit ventilation with chin, top (left & right) & unique rear exhaust vents. 3 intake vents & 1 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-111 weighs 1, 60kg or 3, 50kg Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Features This AFX FX-111DS helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards 2 shell sizes 2 EPS sizes Microlock (quick release) retention system Provides ample ear cavity space for most speaker systems 3 tinted shields available for this model A clear coat finish to protect paint & graphics A large-size FX-111 weighs 1.60kg or 3.50 lbs. Außenschale Aerodynamic shell design constructed using an advanced ultra light weight poly-alloy for light weight & strength Chin bar Cam pivot, chin bar linkage system with latches for ease of movement & security Visor A flush-fit, sidecover-less face shield that is optically correct, compound-curved, scratch-resistant Quick release shield ratchet system Flip down inner smoke shield with easy to use side actuation lever Ventilation 4 points of aerodynamically designed flush fit ventilation with chin, top (left & right) & unique rear exhaust vents 3 intake vents & 1 exhaust vents Interior AFX h... ...

Features This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is D-Ring A clear coat finish to protect paint & graphics A youth large-size FX-142Y weighs 1.10kg or 2.20 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size YS-YL YS YM YL Check Pad Thickness (mm) 30 30 30 Comfort Liner Thickness (mm) 18 15 12 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Features This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is D-Ring A clear coat finish to protect paint & graphics A youth large-size FX-142Y weighs 1.10kg or 2.20 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be r...



...

Features This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is D-Ring A clear coat finish to protect paint & graphics A youth large-size FX-142Y weighs 1.10kg or 2.20 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size YS-YL YS YM YL Check Pad Thickness (mm) 30 30 30 Comfort Liner Thickness (mm) 18 15 12 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 3 intake vents & 8 exhaust vents Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (50 mm) screw-on visor Retention system Race approved Double D-Ring Weight A large-size FX-17 weighs 1.55kg or 3.42 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XS/S/M L/XL/XXL 3XL/4XL XS S M L XL XXL 3XL 4XL Cheek pads (mm) 28 24 20 28 24 20 12 12 Confort-Liner (mm) 10 8 6 10 8 6 80 6 ...