Material goatskin colourfast & sweat-proof Lining unlined Comfort special leather at thumb & finger which allows smartphone operation special flat seam velcro adjustment at cuffs Safety certified under norm EN 13594:2015 "protected glove for motorcyclists" ...

Material goatskin colourfast & sweat-proof Lining unlined Comfort special leather at thumb & finger which allows smartphone operation special flat seam velcro adjustment at cuffs Safety certified under norm EN 13594:2015 "protected glove for motorcyclists" ...

Material goatskin colourfast & sweat-proof Lining unlined Comfort special leather at thumb & finger which allows smartphone operation special flat seam velcro adjustment at cuffs Safety certified under norm EN 13594:2015 "protected glove for motorcyclists" ...

Material goatskin colourfast & sweat-proof Lining unlined Comfort special leather at thumb & finger which allows smartphone operation special flat seam velcro adjustment at cuffs Safety certified under norm EN 13594:2015 "protected glove for motorcyclists" ...

Material microfiber combination Lining soft polyester lining Comfort easy-on zips & Velcro at back gear-shift pad anti-slip sole easy entry via zip detachable toe slider Safety detachable shin bone protection hard plastic heel protection detachable ankle protector reflective sections shin protector certified under norm EN 13634:2015 "protected boots for motorcyclists" ...

Attention! For this product there are additional costs due to the registration of the vest The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The e Vest Clip-in is the first product of Held Biker Fashion with IPS technology powered by In&motion. It is an airbag vest that can be worn underneath & can be integrated into any compatible Held jacket using Clip-in technology. For the function of the e Vest Clip-in, the control module In&box is also necessary & must be installed in the back shell of the vest. The complete hardware & software is included in the garment, i.e. there is no need to install sensors on the motorcycle, nor is it necessary to establish a connection between the vest & the motorcycle. Protection EN 1621-2:2014 back protector Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection System (IPS) Airbag Technology powered by In&motion Fit/features stretch fabric Held Clip-in Technology Lining 3D air mesh panels in back to promote air circulation Outer shell sensitive mesh breathable mesh panels The IPS Technology The intelligent protection for maximum safety. Scope of delivery 1x e Vest Clip-in 1 x In& Box control unit (is active for 48 hours after initial activation & must then be registered & activated separately by in&motion, which is associated with additional costs) The intelligence of the system is contained in the In&box (a box placed in the back of the vest), an array of technologies, the veritable «brain» of the airbag. It

Includes:: the sensors & the algorithm. The latter can detect an unrecoverable imbalance, anticipate an impact & command the airbag inflation. For each use of the system, the data collected expand each user’s embedded algorithm. A finer detection for a protection performance always optimized. Highlights electronic airbag activation, no connection to the motorcycle necessary intelligent, constantly evolving algorithm from In&motion free updates uploadable via USB (Universal Serial Bus), Wi Fi or Bluetooth® very fast activation & inflation speed & very high protection level The system can be made operational again independently by the user after it has been triggered / inflated. The unique developable airbag technology Detect With 1000 analyzes/second, the In&box measures every user’s movement to detect a loss of balance Protect In less than 60 milliseconds, the airbag is inflated at the optimum pressure, protecting the user from impacts Perfect Thanks to the data collected, In&motion can regularly improve the system & detection strategy in order to better predict falls

...

Attention! For this product there are additional costs due to the registration of the vest The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The e Vest Clip-in is the first product of Held Biker Fashion with IPS technology powered by In&motion. It is an airbag vest that can be worn underneath & can be integrated into any compatible Held jacket using Clip-in technology. For the function of the e Vest Clip-in, the control module In&box is also necessary & must be installed in the back shell of the vest. The complete hardware & software is included in the garment, i.e. there is no need to install sensors on the motorcycle, nor is it necessary to establish a connection between the vest & the motorcycle. Protection EN 1621-2:2014 back protector Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection... ...

Attention! For this product there are additional costs due to the registration of the vest The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The e Vest Clip-in is the first product of Held Biker Fashion with IPS technology powered by In&motion. It is an airbag vest that can be worn underneath & can be integrated into any compatible Held jacket using Clip-in technology. For the function of the e Vest Clip-in, the control module In&box is also necessary & must be installed in the back shell of the vest. The complete hardware & software is included in the garment, i.e. there is no need to install sensors on the motorcycle, nor is it necessary to establish a connection between the vest & the motorcycle. Protection EN 1621-2:2014 back protector Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection... ...

Attention! For this product there are additional costs due to the registration of the vest The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The e Vest Clip-in is the first product of Held Biker Fashion with IPS technology powered by In&motion. It is an airbag vest that can be worn underneath & can be integrated into any compatible Held jacket using Clip-in technology. For the function of the e Vest Clip-in, the control module In&box is also necessary & must be installed in the back shell of the vest. The complete hardware & software is included in the garment, i.e. there is no need to install sensors on the motorcycle, nor is it necessary to establish a connection between the vest & the motorcycle. Protection EN 1621-2:2014 back protector Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection... ...

Attention! For this product there are additional costs due to the registration of the vest The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The e Vest Clip-in is the first product of Held Biker Fashion with IPS technology powered by In&motion. It is an airbag vest that can be worn underneath & can be integrated into any compatible Held jacket using Clip-in technology. For the function of the e Vest Clip-in, the control module In&box is also necessary & must be installed in the back shell of the vest. The complete hardware & software is included in the garment, i.e. there is no need to install sensors on the motorcycle, nor is it necessary to establish a connection between the vest & the motorcycle. Protection EN 1621-2:2014 back protector Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection... ...