United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Horse Health & Grooming
Available
-
Fully Adjustable grazing
muzzle For controlled
grazing whether for diet
or control of illness
Fleece wool for comfort
around muzzle and chin D
ring for leading to and
from the field Fully
adjustable for the
perfect fit the Shires
grazing muzzles have been
provent to assist with
controlling eating
regimes whether for diet
or control of
illness.Fleece wool has
been added to the Comfort
Grazing muzzle to make
this the deluxe version,
which offers superb
comfort around the muzzle
and chin.Fully adjustable
head and throat straps
featuring comfort padding
and the field safe
fastenings with a D
ring for leading the
horse to and from the
field. THe muzzle further
features a rubber base
with a hole in the bottom
through which grass can
enter and reinforced
nylon web bars, which
allow free air exchange.
Availability: In Stock
£16.99
Available
-
Approved for Polo
7mm,
smaller version Makes
studding -up easier
Self- cleaning- no need
to tap before inserting
stud Specially hardened-
tougher than tungsten
Rust Resistant Ideal
for good to soft ground
Particularly
suitable for
ponies Supastuds have
been designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
14mm Utility
stud Ideal for very soft
conditions Suitable for
front or hind on any size
horse Makes studding -up
easier Self- cleaning-
no need to tap before
inserting stud Specially
hardened- tougher than
tungsten Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.25
Available
-
8mm small road stud
For
use on road and on hard
ground Makes studding -up
easier Self- cleaning-
no need to tap before
inserting stud
Extra hardened- to
stand up to road
work Rust Resistant.
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.25
Available
-
20mm long, medium
conical stud Ideal for
slippery grass or a
greasy surface on hard
base Perfect when a bit
more grip needed Often
used in hind shoes with
small conical in
front Makes studding -up
easier Self- cleaning-
no need to tap before
inserting stud Specially
hardened- tougher than
tungsten Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.25
Available
-
20mm Maxi Dome Stud
Oval
shape for good
grip Suitable in very
soft conditions For use
in hindshoes,
particularly on large
horses Makes studding -up
easier Self- cleaning-
no need to tap before
inserting stud Specially
hardened- tougher than
tungsten Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
wil no longer have to tap
the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
25mm Conical
stud Designed to give
precision
response Suitable for
deep going Makes studding
-up easier Self-
cleaning- no need to tap
before inserting stud
Specially hardened-
tougher than tungsten
Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
14mm conical, small
radius stud A good
utility, hard ground
stud Makes studding -up
easier Self- cleaning-
no need to tap before
inserting stud Specially
hardened- tougher than
tungsten Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
Eye & Nose Lotion
Kind
and
gentle Antibacterial Cleans
sensitive facial
areas Soothes and calms
raw areas Barrier
Anti-Bacterial Eye & Nose
Lotion is kind and gentle
yet strong enough to
remove discharge away
from the eyes and nose
and prevent bacteria
accumulating.It is a
clear gel which is easily
absorbed and contains
only pure, natural
non-toxic herbal
ingredients. Can
also help keep flies
away from the eyes and
nasal passages. Easily
applied with either a
damp sponge, cotton wool
or cloth.
Availability: In Stock
£5.99
Available
-
Approved for Polo
12mm
cubic stud Makes studding
-up easier Self-
cleaning- no need to tap
before inserting stud
Specially hardened-
tougher than tungsten
Rust Resistant Ideal
for good to soft ground
Also suitable for
ponies Supastuds have
been designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming ,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
Makes studding -up easier
Self- cleaning- no need
to tap before inserting
stud Specially hardened-
tougher than tungsten
Rust Resistant Designed
specifically for use on
an artificial
surface Also good for
muddy
conditions. Supastuds
have been designed to
make the whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
18mm, soft ground
stud Oval shaped for
good grip Ideal for soft,
muddy conditions Makes
studding -up easier
Self- cleaning- no need
to tap before inserting
stud Specially hardened-
tougher than tungsten
Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming ,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
Makes studding -up
easier Self- cleaning- no
need to tap before
inserting stud Specially
hardened- tougher than
tungsten Rust Resistant
9mm slightly large road
stud Extra- hardened to
withstand
roadwork Supastuds have
been designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap-
simply remove any
plug/packing from the
hole (or any excess
dirt/debris if the hole
is not plugged), pick up
the supastud and screw it
straight in. Supastuds
have been designed so
that as you screw them
in, the action actually
cleans out the dirt and
puts it in the slot in
the stud. Any dirt or
small pieces of grit that
would normally be
compressed into the hoof
by the action of the tap(
and stud) sits
comfortably in the recess
at the base of the
supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
Travel studs
Makes
studding -up easier Use
night before to keep
holes clean Self-
cleaning- no need to tap
before inserting stud
Rust Resistant Not
intended for long term
use Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
wil no longer have to tap
the hole first. Supastuds
can be used in a
standard, threaded hole
as fitted in the shoe by
your farrier. The problem
with other studs is that
you have to remove most
if not all of the debris
from the thread before
the stud will go in. This
involves the use of a tap
which is the most time
consuming, frustrating
and dangerous phase of
studding- up. With
supastuds you do not need
to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
16mm length, Conical
stud Suitable for a
variety of ground
conditions Most popular,
versatile all-round
stud Makes studding -up
easier Self- cleaning-
no need to tap before
inserting stud Specially
hardened- tougher than
tungsten Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
wil no longer have to tap
the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming ,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.25
Available
-
The best hold on hard
ground 15mm long Makes
studding -up easier
Self- cleaning- no need
to tap before inserting
stud Specially hardened-
tougher than
tungsten Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
wil no longer have to tap
the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming ,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Available
-
10mm length
Like a road
stud with extra grip A
running spike for
horses! Suitable for
sun-baked ground Often
used in front with small
conical behind Makes
studding -up easier
Self- cleaning- no need
to tap before inserting
stud Specially hardened-
tougher than tungsten
Rust Resistant
Supastuds have been
designed to make the
whole process of
studding- up easier,
faster and safer, as you
will no longer have to
tap the hole first.
Supastuds can be used in
a standard, threaded
hole as fitted in the
shoe by your farrier. The
problem with other studs
is that you have to
remove most if not all of
the debris from the
thread before the stud
will go in. This involves
the use of a tap which is
the most time consuming,
frustrating and dangerous
phase of studding- up.
With supastuds you do not
need to use a tap- simply
remove any plug/packing
from the hole (or any
excess dirt/debris if the
hole is not plugged),
pick up the supastud and
screw it straight in.
Supastuds have been
designed so that as you
screw them in, the
action actually cleans
out the dirt and puts it
in the slot in the stud.
Any dirt or small pieces
of grit that would
normally be compressed
into the hoof by the
action of the tap( and
stud) sits comfortably in
the recess at the base of
the supastud, removing a
potentially problematic
pressure point. Please
note - the slot design is
a CLEANING action and not
a CUTTING action - these
are not self tapping
studs. Another benefit is
the careful design of the
leading edge of the stud,
which is shaped so that
it should be possible to
insert a supastud without
taping even when the
shoes are old and worn,
or have small &0burrs&0
from roadwork. The design
also makes it less likely
that the stud will cross
thread whilst inserting
it.
Availability: In Stock
£2.50
Denmark