Harris Taskmasters 9" Roller Sleeve Available in short pile, medium pile & long pile. For use with emulsion paint. Short pile rollers are ideal for smooth surfaces Medium & long pile rollers are ideal for rough surfaces When used with a Harris roller frame, the sleeve can be slipped on or off quickly for ease of use & cleaning ...

Harris Taskmasters Masonry Brush Tough PVC filaments to cope with rough surfaces such as brick & pebble dash. The clip allows the brush to be rested on the paint can or paint kettle, to reduce the waste & mess. The stiff filaments allow the brush to not only have a brushing motion but a stabbing motion into the surface meaning those hard to reach places can also be coated. Suitable for use in all paints & varnishes. ...

Harris Taskmasters Pack of 10 Disposable Latex Gloves 10 left or right hand gloves 1 size fits all Sensitive yet extremely tough. Powdered inside to prevent over heating Ideal for DIY jobs with paint The Harris taskmasters latex gloves are ideal for people with a lot of decorating to do, by decorating with the gloves on & then disposing will save time & effort. They are made from latex with a powder coat inside to stop your hands from sweating & overheating during use. It also means the gloves are easier to put on & take off. ...

Harris Taskmasters Wallpaper Seam Roller The Harris Seam Roller has been designed to seal wallpaper while leaving no visible marks behind. With a stainless steel shaft & an ergonomically designed handle, this seam roller will stand up to the test-of-time while being comfortable to use. ...

Einhell TC-AP 650 E All Purpose Saw Electronic stroke speed control Blade change without tools Sole plate can be adjusted without tools for optimum use of blade Large soft grip area Ergonomic handles
Includes: saw blade for wood Specifications: Mains supply: 230-240 V 50 Hz Power: 650 W Number of strokes: 500 min^-1
- 3000 min^-1 Stroke

Height: 20 mm Cutting depth in wood: 150 mm Cutting depth in steel: 10 mm



...

Einhell TC-CS 1200 Circular Saw Handy circular saw for straight cuts in wood materials Safe stop thanks to large handle Also with splitter for greater safety on the job Carbide blade for sawing both with & across the grain Cutting depth adjustment without tools for top cutting results Saw table adjustment without tools for angular cuts Complete with parallel stop for accurate cuts Complete with connection for dust extraction Long-lasting, galvanized sole plate Specifications: Mains supply: 230 V 50 Hz Power: 1230 W Idle speed: 5000 min^-1 Saw blade: 160 x 16 mm Number of saw teeth: 24 Cutting depth at 45: 37 mm Cutting depth at 90: 55 mm ...

Einhell TC-DS 19 Delta Sander " Extreme-Fix" velcro fastening for quick change of abrasive paper Connection for dust extractor Ergonomic, compact design Designed for long service life
Includes: dust extractor adapter
Includes: 3 sheets of abrasive paper (P60, P80, P120) Specifications: Mains supply: 230 V 50 Hz Power: 190 W Oscillating speed: 20000 min^-1 Oscillating circuit: 1.2 mm Sandpaper

Size: 90 mm x 90 mm x 90 mm



...

Einhell TC-ID 1000 E Impact Drill Sturdy full metal key chuck Electronic speed control with speed pre-selection Functions drilling & hammer drilling Metal depth stop Large soft grip area for convenient work Additional handle with anti-twist lock Ready to use for a drill stand with a 43 mm shaft Specifications: Mains supply: 230 V 50 Hz Power: 1010 W Number of gears: 1 Idle speed (gear 1): 0-3000 min^-1 Impact rate (gear 1): 0-48000 min^-1 Drill chuck: 1.5 mm
- 13 mm Drilling capacity in wood: 32 mm Drilling capacity in metal: 13 mm Drilling capacity in concrete: 16 mm
...

Einhell TC-ID 650 E Impact Drill Quick change drill chuck Speed electronic with pre-selection 2 functions: drilling, impact drilling With reverse facility for drilling & screwing Metal drill depth stop With handy belt-hook Specifications: Mains supply: 230-240 V 50 Hz Power: 650 W Number of gears: 1 Idle speed (gear 1): 0-2800 min^-1 Impact rate (gear 1): 0-44800 min^-1 Drill chuck: 1.5 mm
- 13 mm Drilling capacity in wood: 25 m Drilling capacity in metal: 10 m Drilling capacity in concrete: 13 mm
...

Einhell TC-JS 80 Pendulum Jigsaw Adjustable pendulum stroke (4 settings) for fast sawing progress Electronic speed control for material-compatible operation Dust extraction via adapter for clean workplace Soleplate can be angled up to 45 for miter cuts Complete with 1 saw blade for wood for immediate project start Parallel guide & allen key included in delivery Specifications: Mains supply: 230 V 50 Hz Power: 600 W Number of strokes: 800 min^-1
- 3000 min^-1 Stroke

Height: 18 mm Cutting depth in wood: 80 mm Cutting depth in plastic: 20 mm Cutting depth in steel: 10 mm Max. bevel cuts: 45


...