Everbuild Caulk Once White C3 A premium quality acrylic caulk that has been formulated to outperform all other conventional decorating caulks & fillers Fast drying Permanently flexible Can be over painted in 1 hour with all paint types or covered over with wallpaper Manufactured using an advanced high quality polymer to offer superior adhesion, low shrink as well as tooling down smoothly ...

Black & Decker CD602 55mm Circular Saw Performance & value Easy to set integral depth of cut adjustment Bevel cut facility for versatility Rise & fall depth setting function for optimum cutting performance Low noise & vibration Safety lock-off prevents unintentional starting Dust extraction ports for a clean & tidy workplace
Includes: TCT Saw Blade & Rip Fence Specification: Power: 1150 W Voltage: 230 V Depth of cut: 55 mm No load speed: 5, 000 rpm Blade diameter: 170 mm Bore

Size: 16 mm Bevel cut: 0-45 Dust extraction: Yes TCT blade: Yes Parallel guide: Yes Sight line facility: No Cable length: 2 m Soft trigger: No Soft grip: No Kit Box: No Lock-off switch: Yes


...

HG 31 Cement & Lime Film Remover 1L Is non-acidic & therefore safely removes cement limescale residues from marble & other types of natural stone such as travertine Also suitable for concrete & synthetic tiles with pieces of stone incorporated, such as granite & marble composite. HG natural stone cement & lime film remover (HG product 31) is non-acidic & therefore safely removes cement and/or limescale residues from marble & other types of natural stone such as travertine, bluestone, etc. but is also extremely suitable for concrete & synthetic tiles with pieces of stone incorporated, such as granite & marble composite. Dissolve half a litre in half a bucket (5 litres) of water. First wet the surface with clean water & then apply the solution using a floor cloth or mop. Do not treat more than 10 to 15 m 2 at once. Then scrub the surface well with a scrubbing (brush), leave to penetrate for 5 minutes & then scrub well again. Then remove the solution from the surface with a mop, & mop the floor using clean water. ...

HG 11 Cement Grout Film Remover 1L Removes cement film, grout film, limescale, rust stains & stubborn residues from the face of tiles without affecting the grout. Suitable for use on glazed tiles, quarry tiles, slate, granite, victorian tiles, brick & concrete, terracotta, porcelain & (acid resistant) Norwegian Slate; also on other acid resistant surfaces such as chrome & stainless steel. Reacts chemically with the surface of the grout to harden it. This means that the grout is stronger & more resistant to dirt. HG cement grout film remover (HG product 11) removes cement residue from all types of porous & non-porous ceramic tiles, flagstones & non-calciferous natural stone types such as Norwegian slate, granite & quartzite. The unique aspect of this product is that it dissolves cement from the tile surface but not the cement from the grouting. The grouting is even reinforced! Dissolve the product in water. First moisten the surface with clean water & then apply the solution generously using a floor cloth or mop. Do not treat more than 10 to 15 m 2 at once. Then scrub the surface well with a stiff broom or scrubbing brush. Leave to penetrate for 15
- 20 minutes, keeping the floor wet with the solution of this product in the meantime. After that, thoroughly scrub the treated surface again & then remove the solution with a mop, before mopping the floor with clean water. DO NOT apply HG Cement Grout Film Remover to calciferous natural stone such as marble, travertine, blue (hard)stone, (non-acid resistant) slate, terazzo, granito, basaslt & cement tiles. Use HG Marble & Natural Stone Cement & Lime Film Remover. If in doubt test on an inconspicuous area.
...

HG Cement Mortar & Efflorescence Remover 1L Cleans off stubborn cement film, mortar residues & white salt deposits (efflorescence) from ceramic & porcelain tiles, flagstones, terracotta, quarry tiles, Victorian tiles, brick, concrete & any other non-calcareous natural stone such as Norwegian Slate & some types of Granite. HG cement, mortar & efflorescence remover (HG product 12) removes stubborn cement & mortar residues from all types of porous & non-porous tiles, flagstones & non-calciferous natural stone types such as Norwegian slate, granite & quartzite. Dissolve half a litre in 5 litres of water. First wet the surface with clean water & then apply the solution using a floor cloth or mop. Then scrub the surface well with a stiff broom or scrubbing brush. Leave to penetrate for a few minutes & then scrub again. Then remove the solution from the surface with a mop, & mop the floor using clean water. ...

Egger Ceramic Anthracite 4.1m x 600mm x 38mm Worktop A rich, but striking worktop that explores a new direction combining concrete & ceramic. The matt-gloss texture, similar to that of a ceramic plate, gives it a contemporary used-look appearance. Its dark colour tone makes it absolutely ideal for combination with light to mid toned wood or plain decors. Mitre service available in selected stores Free cutting service available with this worktop Please note
- worktops are local delivery & special order only. They are subject to a 20% restocking charge if returned or refused
...

Egger Ceramic Chalk 2m x 600mm x 38mm Worktop Features a contemporary matt-gloss texture, similar to that of a ceramic plate. Highly realistic & versatile, use in combination with wood grains as well as neutral solid colours. Match with cooler shades of grey & cool wood grains in combination for a modern, on-trend look. Mitre service available in selected stores Free cutting service available with this worktop Please note
- worktops are local delivery & special order only. They are subject to a 20% restocking charge if returned or refused
...

Egger Ceramic Chalk 4.1m x 600mm x 38mm Worktop Features a contemporary matt-gloss texture, similar to that of a ceramic plate. Highly realistic & versatile, use in combination with wood grains as well as neutral solid colours. Match with cooler shades of grey & cool wood grains in combination for a modern, on-trend look. Mitre service available in selected stores Free cutting service available with this worktop Please note
- worktops are local delivery & special order only. They are subject to a 20% restocking charge if returned or refused
...

Ronseal Chalky Furniture Paint Country Cream 750ml No need to protect with wax No primer needed Resists scuffs & scratches Coats needed: 2 Application: brush Finish: chalky matt Coverage: 6m 2 per litre Touch dry in 30 minutes Recoat: 4 hours Suitable for new or previously painted wood Transforming furniture & doors which a matt, chalky finish whilst providing protection against scratches & scuffs. ...

Ronseal Chalky Furniture Paint Dove Grey 750ml No need to protect with wax No primer needed Resists scuffs & scratches Coats needed: 2 Application: brush Finish: chalky matt Coverage: 6m 2 per litre Touch dry in 30 minutes Recoat: 4 hours Suitable for new or previously painted wood Transforming furniture & doors which a matt, chalky finish whilst providing protection against scratches & scuffs. ...