- DC 0
- 30V 2.5A fixed DC 5 & 12V 0.5A outputs
- Separate analogue voltmeter & ammeter
- Current can be limited from 0 to 2.5A using the current control.
- Fixed outputs through snap-on terminals & variable supply available at pair of terminal posts
- Overload & short circuit protected A cost-effective quality power supply in a strong galvanized steel case with two fixed outputs & a 0 to 30 Vdc output up to 2.5A max. The fixed outputs are of 5 & 12 Vdc each with a 0.5A max. rating. Overload & short circuit protection is provided. A separate analogue voltmeter & ammeter display the output settings for the adjustable supply the voltmeter reading 0 to 30V & the ammeter reading 0 to 2.5A. The output voltage is continuously variable over the range using the voltage control whilst the current can be limited from 0 to 2.5A using the current control. The two fixed outputs are fed out through snap-on terminals & the variable supply is available at a pair of terminal posts. The various terminals are marked &
- & coloured red & black respectively. Specifications Input Voltage AC 240V 50 Hz Input Power Plug UK 3 Pin Mains Plug Input Power Cord Length 1.7m Output Voltage DC 0
- 30V 2.5A max DC 5V 0.5A max DC 12V 0.5A max Ripple amp noise 5m V Line regulation 0.05 10m V Load regulation 0.05 10m V Output Current 2.5A 2500m A Output Voltage Type Variable Output Power Max 75 W Regulated Output Yes Reversible Polarity No Number of Output Sockets 3 Output Tips Socket Type Terminal Post 4mm Socket Efficiency 60 Dimensions 150l x 130w x 225d mm Weight 5250g