More than 6.000 radio stations available Record internet radio & download it automatically onto your iPod Professional audio-editor Save directly onto your iPod Portable on USB (Universal Serial Bus)-memory stick Record up to 400 Songs as MP3 in one hour Legal MP3 recording from the Webcast Music Server made possible with X-OOM MP3 Radio Recorder. Webcast is a web based radio streaming server. It is widely used by a lot of people so you can freely listen to your favourite music. You can choose between more than 6.000 different stations with nearly all kinds of music. X-OOM MP3 Radio Recorder records those streams to mp 3 wav or ogg-vorbis so you can record up to 20 streams of your favourite tracks legally at one time ...

CD MP3 player with ID3 tag support Plays MP3 files from SD card slot & USB (Universal Serial Bus) socket supports USB (Universal Serial Bus) flash drives Output power 4x 15W Fully detachable panel with front auxiliary input Full function IR remote control for ease of use FM tuner with 3 x 6 FM station presets Backlit LCD with clear easy to read white display Illuminated buttons for easy use at night DSP effects Flat Classic Rock Pop Off Plays standard audio & MP3 CDs CD-Rs & CD-RWs FM RDS for best reception & station ID RCA Phono line out Standard ISO connector Specifications Power requirements DC 14.4 V Load impedance 4 ohms Max. power output 4 x 15 W Tone controlsplusmn 8d B bass 100 Hz treble 10 K Hz Dimensions Approx. 192 x 178 x 50mm d x w x h Mounting dimensions Approx. 169 x 182 x 53mm d x w x h Mounting angle 0deg to plusmn 30deg Weight Approx. 1.75kg Maximum output level 2 Vrms plusmn 3d B Frequency response 20 Hz to 20 K Hz Signal-to-noise ratio 85d B Separation 80d BFM tuning range 87.5108 M Hz ...

CD MP3 player with ID3 tag support Plays MP3 files from SD card slot & USB (Universal Serial Bus) socket supports USB (Universal Serial Bus) flash drives Output power 4x 15W Fully detachable panel with front auxiliary input Full function IR remote control for ease of use FM tuner with 3 x 6 FM station presets Backlit LCD with clear easy to read white display Illuminated buttons for easy use at night DSP effects Flat Classic Rock Pop Off Plays standard audio & MP3 CDs CD-Rs & CD-RWs FM RDS for best reception & station ID RCA Phono line out Standard ISO connector Specifications Power requirements DC 14.4 V Load impedance 4 ohms Max. power output 4 x 15 W Tone controlsplusmn 8d B bass 100 Hz treble 10 K Hz Dimensions Approx. 192 x 178 x 50mm d x w x h Mounting dimensions Approx. 169 x 182 x 53mm d x w x h Mounting angle 0deg to plusmn 30deg Weight Approx. 1.75kg Maximum output level 2 Vrms plusmn 3d B Frequency response 20 Hz to 20 K Hz Signal-to-noise ratio 85d B Separation 80d BFM tuning range 87.5108 M Hz ...

Plays both standard audio CDs as well as MP3 discs Buffered Anti-Shock memory protection for consistent music playback Ability to create seamless loops
- both CDs & MP3 discs Buffered instant start & stutter start with settable stutter points Twin easy-to-read backlit LCDs that include text display for identifying song names & other information 12 pitch bend capability via the pitch bend jog wheel Supports true continuous playback & is track sequence programmable Separate controller & base unit components for flexible placement in equipment racks Digital SPDF & unbalanced outputs Numarks MP302 is a dual transport MP3CD player with a wealth of features that make it perfect for both mobile DJs & permanent installations. Featuring separate transport unit & controller sections. With 816 pitch bend capability via its pitch bendjog wheel support for both folders & ID3 tags phono digital output capability plus a digital output the MP302 is a comprehensive playback solution for many environments.
...

Multi-function DVD player with MPEG4 AVI playback Perfect for downloaded content Progressive scan & RGB through SCARTSCART Component S-Video & Composite Video outputs Coaxial & optical digital audio output 6-channel phono audio outputs Full-function remote control ...

Ultra-portable digital video recorder with simple setup & no need for a PCRecord from any video source directly on to a hard drive memory stick Secure Digital MMC or Compact Flash card Play back your recorded TV programmes & movies through your TVRecord effortlessly from any video source TV box satellite PVR DVR VCR & camcorder View content directly on your PSPand 153 mobile phone iPod PDA or any device that accepts a memory stick SD MMC or Compact Flash cards Digitise your home movies for archiving emailing or playback on portables or laptops Easily fit a 2.5 inch hard drive internally into the unit Four recording quality settings superfine fine normal & economy Supported formats ASF AVI MP4 MP3 WMA JPEG BMP GIFDivx Xvid movie player Remote control included ...

USB full speed 2 Mbitss & RS-232 interface to host PCReal-time execution MPLABandreg IDE compatible free copy included Built-in over voltageshort circuit monitor Firmware up-gradeable from PCweb download Totally enclosed Supports low voltage to 2V 2 to 6V range Diagnostic LEDs Power Busy Error Read Write program & data memory of microcontroller Erase of program memory space with verification Freeze-peripherals at breakpoint The MPLABandreg ICD 2 In-Circuit Debugger 2 allows debugging & programming of PICandreg & ds PICandreg FLASH microcontrollers using the powerful graphical user interface of the MPLABandreg Integrated Development Environment IDE included with each kit. The MPLABandreg ICD 2 is connected to the PC using USB (Universal Serial Bus) or RS-232 interface & can be connected to the target via an ICD connector that uses two device IO pins that are shared between the in-circuit debugging & In-Circuit Serial Programmingand 153. The MPLAB ICD 2 currently supports most PIC & ds PIC FLASH microcontrollers. FLASH PICmicro MCUs not supported are PIC16F72737476778384A. The ICD 2 is available as USB (Universal Serial Bus) version Order code N40BH or as a USBSerial RS-232 version Order code N32BH that

Includes:: Picdem 2 demo board & PSU. Also available are two accessories 1. 12F ICD2 Adaptor Order code N35BH
- allows ICD2 to emulate al 8-pins of 8-pin FLASH devices 2. ICD 2 Prog Module Order code N37BH
- Allows ICD2 to program all PIC micros B System requirements BPC-compatible system with Intel Pentiumandreg class or higher processor or equivalent A minimum of 32 Mb RAMA minimum of 40 Mb available hard drive space CD-ROM drive for use with accompanying CDAvailable USB (Universal Serial Bus) or RS-232 port Microsoftandreg Windowsandreg 98 Windows NTandreg 4.0 WIndows 2000 or Windows XP. USB (Universal Serial Bus) support may be limited by the Windows operating system particularly Windows 98NT



...

USB full speed 2 Mbitss & RS-232 interface to host PCReal-time execution MPLABandreg IDE compatible free copy included Built-in over voltageshort circuit monitor Firmware up-gradeable from PCweb download Totally enclosed Supports low voltage to 2V 2 to 6V range Diagnostic LEDs Power Busy Error Read Write program & data memory of microcontroller Erase of program memory space with verification Freeze-peripherals at breakpoint The MPLABandreg ICD 2 In-Circuit Debugger 2 allows debugging & programming of PICandreg & ds PICandreg FLASH microcontrollers using the powerful graphical user interface of the MPLABandreg Integrated Development Environment IDE included with each kit. The MPLABandreg ICD 2 is connected to the PC using USB (Universal Serial Bus) or RS-232 interface & can be connected to the target via an ICD connector that uses two device IO pins that are shared between the in-circuit debugging & In-Circuit Serial Programmingand 153. The MPLAB ICD 2 currently supports most PIC & ds PIC FLASH microcontrollers. FLASH PICmicro MCUs not supported are PIC16F72737476778384A. The ICD 2 is available as USB (Universal Serial Bus) version Order code N40BH or as a USBSerial RS-232 version Order code N32BH that

Includes:: Picdem 2 demo board & PSU. Also available are two accessories 1. 12F ICD2 Adaptor Order code N35BH
- allows ICD2 to emulate al 8-pins of 8-pin FLASH devices 2. ICD 2 Prog Module Order code N37BH
- Allows ICD2 to program all PIC micros B System requirements BPC-compatible system with Intel Pentiumandreg class or higher processor or equivalent A minimum of 32 Mb RAMA minimum of 40 Mb available hard drive space CD-ROM drive for use with accompanying CDAvailable USB (Universal Serial Bus) or RS-232 port Microsoftandreg Windowsandreg 98 Windows NTandreg 4.0 WIndows 2000 or Windows XP. USB (Universal Serial Bus) support may be limited by the Windows operating system particularly Windows 98NT



...

USB full speed 2 Mbitss & RS-232 interface to host PCReal-time execution MPLABandreg IDE compatible free copy included Built-in over voltageshort circuit monitor Firmware up-gradeable from PCweb download Totally enclosed Supports low voltage to 2V 2 to 6V range Diagnostic LEDs Power Busy Error Read Write program & data memory of microcontroller Erase of program memory space with verification Freeze-peripherals at breakpoint The MPLABandreg ICD 2 In-Circuit Debugger 2 allows debugging & programming of PICandreg & ds PICandreg FLASH microcontrollers using the powerful graphical user interface of the MPLABandreg Integrated Development Environment IDE included with each kit. The MPLABandreg ICD 2 is connected to the PC using USB (Universal Serial Bus) or RS-232 interface & can be connected to the target via an ICD connector that uses two device IO pins that are shared between the in-circuit debugging & In-Circuit Serial Programmingand 153. The MPLAB ICD 2 currently supports most PIC & ds PIC FLASH microcontrollers. FLASH PICmicro MCUs not supported are PIC16F72737476778384A. The ICD 2 is available as USB (Universal Serial Bus) version Order code N40BH or as a USBSerial RS-232 version Order code N32BH that

Includes:: Picdem 2 demo board & PSU. Also available are two accessories 1. 12F ICD2 Adaptor Order code N35BH
- allows ICD2 to emulate al 8-pins of 8-pin FLASH devices 2. ICD 2 Prog Module Order code N37BH
- Allows ICD2 to program all PIC micros B System requirements BPC-compatible system with Intel Pentiumandreg class or higher processor or equivalent A minimum of 32 Mb RAMA minimum of 40 Mb available hard drive space CD-ROM drive for use with accompanying CDAvailable USB (Universal Serial Bus) or RS-232 port Microsoftandreg Windowsandreg 98 Windows NTandreg 4.0 WIndows 2000 or Windows XP. USB (Universal Serial Bus) support may be limited by the Windows operating system particularly Windows 98NT



...