Motion Activated PIR Light Switch PIR Wall Switch

Product Description

- Switches lights on automatically when movement is detected
- ideal to be used around hallways staircases & porches
- 110deg radius & up to 5m detection range
- Light can be set to stay on from 5 seconds to 6 minutes after activation
- Adjustable light sensitivity setting This PIR light switch has both practical & security applications. It is designed to replace a standard wall switch & has a mounting depth of just 22mm & is supplied with 2 patress screws for fixing. The unit comes fitted with two grey colour bars down the outside edges & is also supplied with 2 white & 2 black colour bars that can be changed to match the interior of the area in which it is to be installed. The switch is fitted with a 2A time delay glass fuse & replacement fuses are available in packs of ten only Maplin Order Code GL62S. There are three settings to choose from using the selector switch on the front of the unit. ON & OFF settings operate the switch in the same way as a standard household light switch whilst the AUTO setting will set the device to switch on the lights only if the PIR detector is activated. The light will then turn off automatically after the period of time set using the adjustable screw located under the switch & this can be set to between 5 seconds & 6 minutes. Also located under the switch is the light sensitivity adjustable screw. Please note This unit is only suitable for use with ordinary incandescent & tungsten lighting & is not suitable for use with energy saving low voltage halogen or fluorescent lighting. If in any doubt please consult a qualified electrician. Specifications Rated Load 40W Min. 300W Max. Voltage 230 Vac 50 Hz Fuse 2A240VPIR Radius 110deg PIR Range 5 metres