MH-C9000 WizardOne Charger-Analyser MH-C9000 4Bat Chrger

Product Description

- Get the most from your rechargeable AA or AAA batteries
- Match battery capacities & bring life back to old or unused batteries
- Suitable for AA & AAA Ni MH Ni Cd & hybrid batteries
- Independent negative delta V temperature & timer protection eliminates over & undercharging Five modes of operation Charge Recharges the battery at the selected rate
- for batteries used frequently Refresh & Analyze Charges the battery rest for one hour discharge rest again then recharges it. Selectable charging & discharging rate
- for batteries stored for more than two weeks but less than 3 months or those showing poor performance Break-In Also known as IEC capacity measurement " Battery Formingquot. Charges battery at 10 of the battery capacity for 16 hours rest for one hour discharges battery at 20 of the battery capacity then recharges again at 10 for 16 hours
- for new batteries & those stored for more than 3 months Discharge Discharges the battery at the selected rate Cycle Performs charge-discharge cycle for up to 12 times with discharge capacity stored in memory. Recharges battery after final cycle
- for batteries with poor performance The Wizard One has independent charging circuits for each cell position allowing you to perform a different operations on each cell position at the same time. So you could be breaking in 2 new batteries in slots one & two while charging another battery in slot 3 amp cycling a poorly performing battery in slot 4 The large backlit LCD shows the operation mode battery capacity chargingdischarging voltage charging time & charging current for each slot in turn so you know exactly what is going on at all times. With 29 user selectable charging & discharging speeds charging current from 0.2A to 2.0A & discharging current from 0.1A to 1.0A in 0.1A increments. there is a staggering 10000 plus programming possibilities putting you in total control. In most devices usually two or more batteries are used together. When batteries are used in a series the performance is limited by the worst one. In other words one poorly performing battery can significantly reduce the device runtime. The Wizard One charger means that you can match batteries with the same actual capacities to get the maximum possible performance from your equipment. Specifications Charging current Programmable from 0.2A to 2.0A in increments of 0.1 A Topoff charging current 100m A Maintenance charging current 10m A Discharge termination Voltage 1.00 V Discharge current Programmable from 0.1A to 1.0A in increments of 0.1 A Capacity storage memory 12 Cycle mode only Supported capacity 100 to 20000m Ah. Charger input power 12V 2.0 A Adaptor input 100-240V 5060 Hz