Continuity measurement to 200andohmInsulation measurement to 200Mandohm at 500VLoop impedance measurement to 2000andohm uses rolling average11 RCD test current ranges0anddegree and 180anddegree phase switch for optimum testingDisplays mains voltage before testLock-down test button for hands-free testingProtected against phase to phase connection Instant correct wiring status checkComplies with BS7671 Part P The KT61 is an insulation continuity and loop impedance tester and an RCD tester combined into one unit. It allows the user to test the safe installation of their work. It will test the resistance and insulation of installed cables. The safe levels of resistance while the circuit is live and the maximum potential or fault current of the installed circuit and that the circuit is adequately protect by carrying out a function test on the protective RCD installed at the fuse board.brbrThe KT61 is used by Electricians Electrical Contractors and Engineers. Due to Part P they are also used by Plumbers Heating Engineers Kitchen Fitters Builders and bathroom fitters. The KT61 is particularly popular amongst the non electrical trade people due to its competitive price ease of use and accuracy.brbrKit Includes KAMP 13 mains lead ACC016E 3 Wire distribution board test lead ACC020 test leads Batteries Test lead pouch Carrying strap Large carrying case Instruction Manual Certificate of Conformity.
Two LED indicators for PASS FAIL evaluation of test results are placed on both sides of the LCD.Battery powered making the instrument more portable for moving around test sites.Batteries can be charged by connecting 12 V via an adapter.2 levels of auto sequence basic and advanced and separate simple mode make the unit suitable for all users.Large bright LCD with backlight for easy reading of results even in dark conditions.The unit comes complete with built-in help screens for referencing on site.If changes occur to the regulations upgrades can be made to the firmware to keep the instrument up to date.Optional barcode scanning system can help increase speed of testing with medium and advanced auto sequencing reads appliance IDs.The integrated checkbox has been developed to provide the checking of the calibration of MI 3311 GammaPAT as required by the Code of Practice.Auto sequence Instrument automatically selects and runs the appropriate tests limits and testing order appropriate to the selected appliance. The MI 3311 GammaPAT LITE is a handheld battery powered PAT tester. This is used for fast and efficient periodic testing of portable appliances in line with current regulations and guidlines in the work place. It is a perfect tool for in house maintenance engineers and electrical contractors. It is easy to use with 2 levels of auto sequence basic and advanced and a simple mode to make the unit user friendly. brbrThe small light weight design of the GammaPAT LITE makes it ideal for getting into small awkward places e.g. under tables behind cabinets etc and reduce the time involved in testing. It also has an integrated PAT Checkbox to ensure that the instrument always reads correctly. The MI 3311 GammaPAT automatically performs Earth Continuity Insulation Sub-Leakage test and Polarity tests according to the appliance type.brbrThis product can be used by anyone who is considered competent to carry out PAT testing work.
Automatic loop evaluation built-in loop impedance tables allow automatic evaluation of loop impedance compared to the regulations.Help screens unit comes complete with in-built help screens for referencing on site.Online Voltage Monitoring Monitors all 3 voltages in real-time.Upgradeable If changes occur to the regulations changes can be made to the unit to keep the unit up to date.Polarity swap automatic polarity reversal on continuity test.Insulation wide range of insulation test voltages from 50 V to 1000 V reading up to 999 MO.Trip Lock function Zs RCD function performs a loop test without tripping the RCDRCBO.Built-in charger and rechargeable batteries Unit has an in-built charging circuit and comes complete with a set of rechargeable NiMH batteries.RCD Auto Automated RCD testing reduces circuit test time.Phase sequence test required by BS76712008 17th Edition. BHow does it workBbrThe Metrel Eurotest COMBO 17th Edition tester allows you to test and certify fixed electrical installation in compliance with the Part P 17th Edition regulations BS7671 and BS EN61557. The MI3125B can perform a variety of electrical tests including Continuity Testing Insulation Testing Automatic RCD testing including RCD Ramp Testing with a no RCD trip feature Earth Loop impedance testing and PSC prospective short circuit current. brBasically all the tests you need to fully ensure safety within electrical installations in both commercial and domestic environments. The EurotestCOMBO can even perform online voltage monitoring and phase sequence testing for 3 Phase installations. brbrThe MI3125 B1 has inbuilt Fuse Characteristics tables which allows for easier evaluation of the Loop Resistance in accordance with BSEN7671. Calculations and Tables are no longer necessary with this feature. Additional Help screens describing how to connect the instrument into the installation and how to perform the test are also inbuilt.brMetrels Eurotest COMBO is also the first multifunction tester on the UK which performs RCD testing on B Type RCDs. Something which will undoubtedly become an asset in the future. The long term reliability of this multifunction tester is guaranteed and the tester comes supplied with a manufacturers calibration certificate. brbrThe MI1325 B1 is used by Electricians Electrical Contractors and Engineers. Due to Part P they are also used by Plumbers Heating Engineers Kitchen Fitters Builders and Bathroom Fitters.