About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store
Filters

Filters

[0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z]
Price: £ - £
Components > Resistors > Potentiometers
Available
Cermet Preset Potentiometers Cermet 1k
Cermet Preset Potentiometers
Cermet 1k
    A miniature horizontal
    mounting cermet preset
    featuring high stability
    and excellent resolution.
    It has an integral dust
    cover fits 2.54mm 0.1in.
    matrix directly and may
    be adjusted by a
    screwdriver from either
    side. Linear track only.
    Tolerance plusmn20. Power
    rating 0.2W at 70 C. Max
    volt 100Vdc or AC.
    Temperature coefficient
    plusmn250ppm C.
    Dimensions 7.8mm diameter
    stands 7.8mm high from
    PCB. Value is marked on
    case as shown in
    brackets.The following
    values are
    available100Omega 101
    500Omega 501 1k 102 5k
    502 10k 103 50k 503 100k
    104 1M 105.
Availability: In Stock
£0.77
Available
Miniature Dual Gang Linear Potentiometers Min Slide Lin 10k
Miniature Dual Gang Linear
Potentiometers Min Slide Lin
10k
    Two dual miniature slide
    track carbon
    potentiometers with
    printed circuit board
    mounting terminals.
    Potentiometer measures
    60mm long x 9mm wide with
    a 45mm track length.
    Height above PCB
    excluding slide tang
    6.5mm. The pin spacing is
    not compatible with
    2.54mm 0.1in. matrix
    board. The potentiometer
    may be attached to a
    front panel using two M2
    bolts fixing centres
    56mm. Slide tang is 15mm
    long. Available in 10k
    and 100k versions.
Availability: In Stock
£0.72
Available
Miniature Dual Gang Linear Potentiometers Min Slide Lin 100k
Miniature Dual Gang Linear
Potentiometers Min Slide Lin
100k
    Two dual miniature slide
    track carbon
    potentiometers with
    printed circuit board
    mounting terminals.
    Potentiometer measures
    60mm long x 9mm wide with
    a 45mm track length.
    Height above PCB
    excluding slide tang
    6.5mm. The pin spacing is
    not compatible with
    2.54mm 0.1in. matrix
    board. The potentiometer
    may be attached to a
    front panel using two M2
    bolts fixing centres
    56mm. Slide tang is 15mm
    long. Available in 10k
    and 100k versions.
Availability: In Stock
£0.72
Available
Square 22-Turn Cermet Preset Potentiometers 22-Turn Cermet 10k
Square 22-Turn Cermet Preset
Potentiometers 22-Turn Cermet
10k
    A 22-turn cermet preset
    with slipping clutch 25
    mechanical turns and an
    audible click at each end
    of travel to define the
    ends. This professional
    quality trimmer is
    designed for applications
    where reliability and
    small size are major
    considerations. Infinite
    electrical resolution.
    Power rating 0.5W at 70
    C. Tolerance plusmn10.
    Max working voltage 300V.
    Temperature coefficient
    plusmn100ppm C max.
    Values available1k 5k 10k
    50k 100k 1M. The
    dustproof and
    immersion-proof case
    measures 9.6 x 4.8 x 10mm
    high. Drive head stands a
    further 1.5mm high. Lead
    length 6.2mm. Pins are
    in-line on 2.54mm 0.1in.
    centres.
Availability: In Stock
£1.48
Available
Square 22-Turn Cermet Preset Potentiometers 22-Turn Cermet 5k
Square 22-Turn Cermet Preset
Potentiometers 22-Turn Cermet
5k
    A 22-turn cermet preset
    with slipping clutch 25
    mechanical turns and an
    audible click at each end
    of travel to define the
    ends. This professional
    quality trimmer is
    designed for applications
    where reliability and
    small size are major
    considerations. Infinite
    electrical resolution.
    Power rating 0.5W at 70
    C. Tolerance plusmn10.
    Max working voltage 300V.
    Temperature coefficient
    plusmn100ppm C max.
    Values available1k 5k 10k
    50k 100k 1M. The
    dustproof and
    immersion-proof case
    measures 9.6 x 4.8 x 10mm
    high. Drive head stands a
    further 1.5mm high. Lead
    length 6.2mm. Pins are
    in-line on 2.54mm 0.1in.
    centres.
Availability: In Stock
£1.48
Available
Square 22-Turn Cermet Preset Potentiometers 22-Turn Cermet 1M
Square 22-Turn Cermet Preset
Potentiometers 22-Turn Cermet
1M
    A 22-turn cermet preset
    with slipping clutch 25
    mechanical turns and an
    audible click at each end
    of travel to define the
    ends. This professional
    quality trimmer is
    designed for applications
    where reliability and
    small size are major
    considerations. Infinite
    electrical resolution.
    Power rating 0.5W at 70
    C. Tolerance plusmn10.
    Max working voltage 300V.
    Temperature coefficient
    plusmn100ppm C max.
    Values available1k 5k 10k
    50k 100k 1M. The
    dustproof and
    immersion-proof case
    measures 9.6 x 4.8 x 10mm
    high. Drive head stands a
    further 1.5mm high. Lead
    length 6.2mm. Pins are
    in-line on 2.54mm 0.1in.
    centres.
Availability: In Stock
£1.48
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 2M5
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 2M5
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Dual Miniature Potentiometers Min Dual Pot Lin100k
Dual Miniature Potentiometers
Min Dual Pot Lin100k
    A range of dual miniature
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.125W
    linear 0.06W log. Max
    voltage 200V linear 150V
    log. Overall shaft length
    20mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track10k 100kThe
    following values are
    available with a
    logarithmic track 10k
    100k
Availability: In Stock
£0.80
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 500k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 500k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 250k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 250k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 250R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 250R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 220R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 220R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 50k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 50k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 50R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 50R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 10k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 10k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 25k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 25k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 2k5
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 2k5
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 10k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 10k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 1M
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 1M
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Miniature Potentiometers Min Pot Log 100k
Miniature Potentiometers Min
Pot Log 100k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Miniature Potentiometers Min Pot Lin 1k
Miniature Potentiometers Min
Pot Lin 1k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Miniature Potentiometers Min Pot Log 1M
Miniature Potentiometers Min
Pot Log 1M
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Miniature Potentiometers Min Pot Lin 47k
Miniature Potentiometers Min
Pot Lin 47k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Miniature Potentiometers Min Pot Lin 22k
Miniature Potentiometers Min
Pot Lin 22k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Miniature Potentiometers Min Pot Lin 10k
Miniature Potentiometers Min
Pot Lin 10k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Miniature Potentiometers Min Pot Lin 100k
Miniature Potentiometers Min
Pot Lin 100k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Miniature Potentiometers Min Pot Lin 1M
Miniature Potentiometers Min
Pot Lin 1M
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 250R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 250R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Miniature Potentiometers Min Pot Lin 470k
Miniature Potentiometers Min
Pot Lin 470k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 2k5
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 2k5
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Miniature Potentiometers Min Pot Log 47k
Miniature Potentiometers Min
Pot Log 47k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 50k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 50k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Miniature Potentiometers Min Pot Log 10k
Miniature Potentiometers Min
Pot Log 10k
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 5k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 5k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 5M
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 5M
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 5M
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 5M
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 1k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 1k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 2M5
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 2M5
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Standard Potentiometers Pot Lin 10k
Standard Potentiometers Pot
Lin 10k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 100k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 100k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Standard Potentiometers Pot Lin 47k
Standard Potentiometers Pot
Lin 47k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Standard Potentiometers Pot Lin 470k
Standard Potentiometers Pot
Lin 470k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Standard Potentiometers Pot Lin 220k
Standard Potentiometers Pot
Lin 220k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Standard Potentiometers Pot Lin 2M2
Standard Potentiometers Pot
Lin 2M2
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Standard Potentiometers Pot Lin 1M
Standard Potentiometers Pot
Lin 1M
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Standard Potentiometers Pot Lin 1k
Standard Potentiometers Pot
Lin 1k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Dual Miniature Potentiometers Min Dual Pot Log 10k
Dual Miniature Potentiometers
Min Dual Pot Log 10k
    A range of dual miniature
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.125W
    linear 0.06W log. Max
    voltage 200V linear 150V
    log. Overall shaft length
    20mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track10k 100kThe
    following values are
    available with a
    logarithmic track 10k
    100k
Availability: In Stock
£0.80
Available
Dual Miniature Potentiometers Min Dual Pot Log100k
Dual Miniature Potentiometers
Min Dual Pot Log100k
    A range of dual miniature
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.125W
    linear 0.06W log. Max
    voltage 200V linear 150V
    log. Overall shaft length
    20mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track10k 100kThe
    following values are
    available with a
    logarithmic track 10k
    100k
Availability: In Stock
£0.80
Available
Standard Potentiometers Pot Lin 100k
Standard Potentiometers Pot
Lin 100k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Dual Miniature Potentiometers Min Dual Pot Lin 10k
Dual Miniature Potentiometers
Min Dual Pot Lin 10k
    A range of dual miniature
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.125W
    linear 0.06W log. Max
    voltage 200V linear 150V
    log. Overall shaft length
    20mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track10k 100kThe
    following values are
    available with a
    logarithmic track 10k
    100k
Availability: In Stock
£0.80
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 1M
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 1M
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 500R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 500R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 25k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 25k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Cermet Preset Potentiometers Cermet 100k
Cermet Preset Potentiometers
Cermet 100k
    A miniature horizontal
    mounting cermet preset
    featuring high stability
    and excellent resolution.
    It has an integral dust
    cover fits 2.54mm 0.1in.
    matrix directly and may
    be adjusted by a
    screwdriver from either
    side. Linear track only.
    Tolerance plusmn20. Power
    rating 0.2W at 70 C. Max
    volt 100Vdc or AC.
    Temperature coefficient
    plusmn250ppm C.
    Dimensions 7.8mm diameter
    stands 7.8mm high from
    PCB. Value is marked on
    case as shown in
    brackets.The following
    values are
    available100Omega 101
    500Omega 501 1k 102 5k
    502 10k 103 50k 503 100k
    104 1M 105.
Availability: In Stock
£0.77
Available
Cermet Preset Potentiometers Cermet 100R
Cermet Preset Potentiometers
Cermet 100R
    A miniature horizontal
    mounting cermet preset
    featuring high stability
    and excellent resolution.
    It has an integral dust
    cover fits 2.54mm 0.1in.
    matrix directly and may
    be adjusted by a
    screwdriver from either
    side. Linear track only.
    Tolerance plusmn20. Power
    rating 0.2W at 70 C. Max
    volt 100Vdc or AC.
    Temperature coefficient
    plusmn250ppm C.
    Dimensions 7.8mm diameter
    stands 7.8mm high from
    PCB. Value is marked on
    case as shown in
    brackets.The following
    values are
    available100Omega 101
    500Omega 501 1k 102 5k
    502 10k 103 50k 503 100k
    104 1M 105.
Availability: In Stock
£0.77
Available
Cermet Preset Potentiometers Cermet 10k
Cermet Preset Potentiometers
Cermet 10k
    A miniature horizontal
    mounting cermet preset
    featuring high stability
    and excellent resolution.
    It has an integral dust
    cover fits 2.54mm 0.1in.
    matrix directly and may
    be adjusted by a
    screwdriver from either
    side. Linear track only.
    Tolerance plusmn20. Power
    rating 0.2W at 70 C. Max
    volt 100Vdc or AC.
    Temperature coefficient
    plusmn250ppm C.
    Dimensions 7.8mm diameter
    stands 7.8mm high from
    PCB. Value is marked on
    case as shown in
    brackets.The following
    values are
    available100Omega 101
    500Omega 501 1k 102 5k
    502 10k 103 50k 503 100k
    104 1M 105.
Availability: In Stock
£0.77
Available
Cermet Preset Potentiometers Cermet 500R
Cermet Preset Potentiometers
Cermet 500R
    A miniature horizontal
    mounting cermet preset
    featuring high stability
    and excellent resolution.
    It has an integral dust
    cover fits 2.54mm 0.1in.
    matrix directly and may
    be adjusted by a
    screwdriver from either
    side. Linear track only.
    Tolerance plusmn20. Power
    rating 0.2W at 70 C. Max
    volt 100Vdc or AC.
    Temperature coefficient
    plusmn250ppm C.
    Dimensions 7.8mm diameter
    stands 7.8mm high from
    PCB. Value is marked on
    case as shown in
    brackets.The following
    values are
    available100Omega 101
    500Omega 501 1k 102 5k
    502 10k 103 50k 503 100k
    104 1M 105.
Availability: In Stock
£0.77
Available
Cermet Preset Potentiometers Cermet 50k
Cermet Preset Potentiometers
Cermet 50k
    A miniature horizontal
    mounting cermet preset
    featuring high stability
    and excellent resolution.
    It has an integral dust
    cover fits 2.54mm 0.1in.
    matrix directly and may
    be adjusted by a
    screwdriver from either
    side. Linear track only.
    Tolerance plusmn20. Power
    rating 0.2W at 70 C. Max
    volt 100Vdc or AC.
    Temperature coefficient
    plusmn250ppm C.
    Dimensions 7.8mm diameter
    stands 7.8mm high from
    PCB. Value is marked on
    case as shown in
    brackets.The following
    values are
    available100Omega 101
    500Omega 501 1k 102 5k
    502 10k 103 50k 503 100k
    104 1M 105.
Availability: In Stock
£0.77
Available
18-Turn Cermet Preset Potentiometers 18-Turn Cermet 10k
18-Turn Cermet Preset
Potentiometers 18-Turn Cermet
10k
    An 18-turn cermet preset
    with slipping clutch 23
    mechanical turns end
    stops and infinite
    electrical resolution.
    Power rating 0.75W at 70
    C. Max working voltage
    315V. Tolerance plusmn10.
    Temperature coefficient
    plusmn100ppm C max.
    Values available500Omega
    1k 5k 10k 50k 100k 1M.
    The dustproof and
    immersion-proof case
    measures 19.3 x 5 x 6.6mm
    high and the terminal
    pins are at 7.62mm 0.3in.
    and 5.08mm 0.2in. spacing
    the centre pin being
    offset by 2.54mm 0.1in..
Availability: In Stock
£0.99
Available
18-Turn Cermet Preset Potentiometers 18-Turn Cermet 100k
18-Turn Cermet Preset
Potentiometers 18-Turn Cermet
100k
    An 18-turn cermet preset
    with slipping clutch 23
    mechanical turns end
    stops and infinite
    electrical resolution.
    Power rating 0.75W at 70
    C. Max working voltage
    315V. Tolerance plusmn10.
    Temperature coefficient
    plusmn100ppm C max.
    Values available500Omega
    1k 5k 10k 50k 100k 1M.
    The dustproof and
    immersion-proof case
    measures 19.3 x 5 x 6.6mm
    high and the terminal
    pins are at 7.62mm 0.3in.
    and 5.08mm 0.2in. spacing
    the centre pin being
    offset by 2.54mm 0.1in..
Availability: In Stock
£0.99
Available
18-Turn Cermet Preset Potentiometers 18-Turn Cermet 50k
18-Turn Cermet Preset
Potentiometers 18-Turn Cermet
50k
    An 18-turn cermet preset
    with slipping clutch 23
    mechanical turns end
    stops and infinite
    electrical resolution.
    Power rating 0.75W at 70
    C. Max working voltage
    315V. Tolerance plusmn10.
    Temperature coefficient
    plusmn100ppm C max.
    Values available500Omega
    1k 5k 10k 50k 100k 1M.
    The dustproof and
    immersion-proof case
    measures 19.3 x 5 x 6.6mm
    high and the terminal
    pins are at 7.62mm 0.3in.
    and 5.08mm 0.2in. spacing
    the centre pin being
    offset by 2.54mm 0.1in..
Availability: In Stock
£0.99
Available
18-Turn Cermet Preset Potentiometers 18-Turn Cermet 500R
18-Turn Cermet Preset
Potentiometers 18-Turn Cermet
500R
    An 18-turn cermet preset
    with slipping clutch 23
    mechanical turns end
    stops and infinite
    electrical resolution.
    Power rating 0.75W at 70
    C. Max working voltage
    315V. Tolerance plusmn10.
    Temperature coefficient
    plusmn100ppm C max.
    Values available500Omega
    1k 5k 10k 50k 100k 1M.
    The dustproof and
    immersion-proof case
    measures 19.3 x 5 x 6.6mm
    high and the terminal
    pins are at 7.62mm 0.3in.
    and 5.08mm 0.2in. spacing
    the centre pin being
    offset by 2.54mm 0.1in..
Availability: In Stock
£0.99
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 100R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 100R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 250k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 250k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 100R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 100R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 1k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 1k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 500k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 500k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Hor Encl Preset 500R
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Hor Encl
Preset 500R
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 100k
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 100k
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
Cermet Preset Potentiometers Cermet 5k
Cermet Preset Potentiometers
Cermet 5k
    A miniature horizontal
    mounting cermet preset
    featuring high stability
    and excellent resolution.
    It has an integral dust
    cover fits 2.54mm 0.1in.
    matrix directly and may
    be adjusted by a
    screwdriver from either
    side. Linear track only.
    Tolerance plusmn20. Power
    rating 0.2W at 70 C. Max
    volt 100Vdc or AC.
    Temperature coefficient
    plusmn250ppm C.
    Dimensions 7.8mm diameter
    stands 7.8mm high from
    PCB. Value is marked on
    case as shown in
    brackets.The following
    values are
    available100Omega 101
    500Omega 501 1k 102 5k
    502 10k 103 50k 503 100k
    104 1M 105.
Availability: In Stock
£0.77
Archived Product
Sub-Miniature Fully EnclosedCarbon Preset Potentiometers Vrt Encl Preset 5K
Sub-Miniature Fully
EnclosedCarbon Preset
Potentiometers Vrt Encl
Preset 5K
    A new range of
    sub-miniature horizontal
    and vertical mounting
    linear track presets
    fully enclosed in a flame
    retardant plastic
    housing. The insulated
    slider can be adjusted
    from either side by a
    tool with a blade 1 to
    2.3mm wide. Power rating
    0..15W at 40degC.
    Tolerance plusmn20
    plusmn30 2.2MOmega and
    4.7MOmega. Enclosure is
    dust and splash proof.
    Dimensions 10 x 10.3 x
    4.5mm. Vertical type fits
    flush to PCB 12.1mm
    overall height from PCB
    horizontal type sits
    1.5mm proud of PCB 6mm
    overall height from PCB.
    Pins require 1.3mm dia.
    PCB holes. Pin length
    4.5mm.The following
    values are available in
    horizontal types50Omega
    100Omega 220Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.The
    following values are
    available in vertical
    types50Omega 100Omega
    250Omega 500Omega 1k 2k5
    5k 10k 25k 50k 100k 250k
    500k 1M 2M5 5M.
Availability: In Stock
£0.37
Available
18-Turn Cermet Preset Potentiometers 18-Turn Cermet 1M
18-Turn Cermet Preset
Potentiometers 18-Turn Cermet
1M
    An 18-turn cermet preset
    with slipping clutch 23
    mechanical turns end
    stops and infinite
    electrical resolution.
    Power rating 0.75W at 70
    C. Max working voltage
    315V. Tolerance plusmn10.
    Temperature coefficient
    plusmn100ppm C max.
    Values available500Omega
    1k 5k 10k 50k 100k 1M.
    The dustproof and
    immersion-proof case
    measures 19.3 x 5 x 6.6mm
    high and the terminal
    pins are at 7.62mm 0.3in.
    and 5.08mm 0.2in. spacing
    the centre pin being
    offset by 2.54mm 0.1in..
Availability: In Stock
£1.00
Available
Standard Dual-Gang Potentiometers Dual Pot Lin 220k
Standard Dual-Gang
Potentiometers Dual Pot Lin
220k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Miniature Potentiometers Min Pot Lin 4k7
Miniature Potentiometers Min
Pot Lin 4k7
    rotary carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required 7mm.
    Power rating 0.2W linear
    0.1W log. Max voltage
    200V linear 150V log.
    Overall shaft length
    25mm. Linear types are
    marked B and log types
    are marked A.The
    following values are
    available with a linear
    track1k 4k7 10k 22k 47k
    100k 470k 1MThe following
    values are available with
    a logarithmic track 10k
    47k 100k 1M A range of
    miniature
Availability: In Stock
£0.80
Available
Standard Potentiometers with Switch Sw Pot Lin 470k
Standard Potentiometers With
Switch Sw Pot Lin 470k
    A range of rotary carbon
    track potentiometers with
    DPST switch. The
    potentiometer has printed
    circuit mounting
    terminals. Fixing hole
    required10.5mm. Power
    rating0.4W linear 0.2W
    log. Max.
    voltage500Vdc.Toleranceplusmn20.
    Switch rating4A at
    250Vac. Overall shaft
    length50mm.The following
    values are available with
    a linear track4k7 1k 10k
    22k 47k 100k 220k 470k 1M
Availability: In Stock
£2.45
Available
Standard Potentiometers with Switch Sw Pot Lin 4k7
Standard Potentiometers With
Switch Sw Pot Lin 4k7
    A range of rotary carbon
    track potentiometers with
    DPST switch. The
    potentiometer has printed
    circuit mounting
    terminals. Fixing hole
    required10.5mm. Power
    rating0.4W linear 0.2W
    log. Max.
    voltage500Vdc.Toleranceplusmn20.
    Switch rating4A at
    250Vac. Overall shaft
    length50mm.The following
    values are available with
    a linear track4k7 1k 10k
    22k 47k 100k 220k 470k 1M
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Log 100k
Standard Dual-Gang
Potentiometers Dual Pot Log
100k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Log 22k
Standard Dual-Gang
Potentiometers Dual Pot Log
22k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
18-Turn Cermet Preset Potentiometers 18-Turn Cermet 5k
18-Turn Cermet Preset
Potentiometers 18-Turn Cermet
5k
    An 18-turn cermet preset
    with slipping clutch 23
    mechanical turns end
    stops and infinite
    electrical resolution.
    Power rating 0.75W at 70
    C. Max working voltage
    315V. Tolerance plusmn10.
    Temperature coefficient
    plusmn100ppm C max.
    Values available500Omega
    1k 5k 10k 50k 100k 1M.
    The dustproof and
    immersion-proof case
    measures 19.3 x 5 x 6.6mm
    high and the terminal
    pins are at 7.62mm 0.3in.
    and 5.08mm 0.2in. spacing
    the centre pin being
    offset by 2.54mm 0.1in..
Availability: In Stock
£0.99
Available
Standard Dual-Gang Potentiometers Dual Pot Log 47k
Standard Dual-Gang
Potentiometers Dual Pot Log
47k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Lin 100k
Standard Dual-Gang
Potentiometers Dual Pot Lin
100k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
18-Turn Cermet Preset Potentiometers 18-Turn Cermet 1k
18-Turn Cermet Preset
Potentiometers 18-Turn Cermet
1k
    An 18-turn cermet preset
    with slipping clutch 23
    mechanical turns end
    stops and infinite
    electrical resolution.
    Power rating 0.75W at 70
    C. Max working voltage
    315V. Tolerance plusmn10.
    Temperature coefficient
    plusmn100ppm C max.
    Values available500Omega
    1k 5k 10k 50k 100k 1M.
    The dustproof and
    immersion-proof case
    measures 19.3 x 5 x 6.6mm
    high and the terminal
    pins are at 7.62mm 0.3in.
    and 5.08mm 0.2in. spacing
    the centre pin being
    offset by 2.54mm 0.1in..
Availability: In Stock
£0.99
Available
Standard Dual-Gang Potentiometers Dual Pot Lin 470k
Standard Dual-Gang
Potentiometers Dual Pot Lin
470k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Lin 22k
Standard Dual-Gang
Potentiometers Dual Pot Lin
22k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Lin 47k
Standard Dual-Gang
Potentiometers Dual Pot Lin
47k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Lin 4k7
Standard Dual-Gang
Potentiometers Dual Pot Lin
4k7
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Lin 10k
Standard Dual-Gang
Potentiometers Dual Pot Lin
10k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Log 10k
Standard Dual-Gang
Potentiometers Dual Pot Log
10k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Dual-Gang Potentiometers Dual Pot Log 220k
Standard Dual-Gang
Potentiometers Dual Pot Log
220k
    A range of rotary
    dual-gang carbon track
    potentiometers with
    printed circuit mounting
    terminals. Fixing hole
    required 10.5mm. Power
    rating 0.4W linear 0.2W
    log. Max. voltage 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track4k7 10k 22k
    47k 100k 220k 470kThe
    following values are
    available with a
    logarithmic track10k 22k
    47k 100k 220k.
Availability: In Stock
£2.45
Available
Standard Potentiometers with Switch Sw Pot Lin 47k
Standard Potentiometers With
Switch Sw Pot Lin 47k
    A range of rotary carbon
    track potentiometers with
    DPST switch. The
    potentiometer has printed
    circuit mounting
    terminals. Fixing hole
    required10.5mm. Power
    rating0.4W linear 0.2W
    log. Max.
    voltage500Vdc.Toleranceplusmn20.
    Switch rating4A at
    250Vac. Overall shaft
    length50mm.The following
    values are available with
    a linear track4k7 1k 10k
    22k 47k 100k 220k 470k 1M
Availability: In Stock
£2.45
Available
Standard Potentiometers with Switch Sw Pot Lin 22k
Standard Potentiometers With
Switch Sw Pot Lin 22k
    A range of rotary carbon
    track potentiometers with
    DPST switch. The
    potentiometer has printed
    circuit mounting
    terminals. Fixing hole
    required10.5mm. Power
    rating0.4W linear 0.2W
    log. Max.
    voltage500Vdc.Toleranceplusmn20.
    Switch rating4A at
    250Vac. Overall shaft
    length50mm.The following
    values are available with
    a linear track4k7 1k 10k
    22k 47k 100k 220k 470k 1M
Availability: In Stock
£2.45
Available
Standard Potentiometers with Switch Sw Pot Lin 220k
Standard Potentiometers With
Switch Sw Pot Lin 220k
    A range of rotary carbon
    track potentiometers with
    DPST switch. The
    potentiometer has printed
    circuit mounting
    terminals. Fixing hole
    required10.5mm. Power
    rating0.4W linear 0.2W
    log. Max.
    voltage500Vdc.Toleranceplusmn20.
    Switch rating4A at
    250Vac. Overall shaft
    length50mm.The following
    values are available with
    a linear track4k7 1k 10k
    22k 47k 100k 220k 470k 1M
Availability: In Stock
£2.45
Available
Standard Potentiometers with Switch Sw Pot Lin 1M
Standard Potentiometers With
Switch Sw Pot Lin 1M
    A range of rotary carbon
    track potentiometers with
    DPST switch. The
    potentiometer has printed
    circuit mounting
    terminals. Fixing hole
    required10.5mm. Power
    rating0.4W linear 0.2W
    log. Max.
    voltage500Vdc.Toleranceplusmn20.
    Switch rating4A at
    250Vac. Overall shaft
    length50mm.The following
    values are available with
    a linear track4k7 1k 10k
    22k 47k 100k 220k 470k 1M
Availability: In Stock
£2.45
Available
Standard Potentiometers with Switch Sw Pot Lin 1k
Standard Potentiometers With
Switch Sw Pot Lin 1k
    A range of rotary carbon
    track potentiometers with
    DPST switch. The
    potentiometer has printed
    circuit mounting
    terminals. Fixing hole
    required10.5mm. Power
    rating0.4W linear 0.2W
    log. Max.
    voltage500Vdc.Toleranceplusmn20.
    Switch rating4A at
    250Vac. Overall shaft
    length50mm.The following
    values are available with
    a linear track4k7 1k 10k
    22k 47k 100k 220k 470k 1M
Availability: In Stock
£2.57
Available
Standard Potentiometers Pot Lin 22k
Standard Potentiometers Pot
Lin 22k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Available
Standard Potentiometers Pot Log 10k
Standard Potentiometers Pot
Log 10k
    A range of carbon track
    potentiometers with
    printed circuit board
    mounting terminals.
    Fixing hole required
    10.5mm 1332in.. Power
    rating 0.4W linear 0.2W
    log. Max. volt 500Vdc.
    Tolerance plusmn20.
    Overall shaft length
    50mm.The following values
    are available with a
    linear track1k 4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.The following values
    are available with a
    logarithmic track4k7 10k
    22k 47k 100k 220k 470k 1M
    2M2.
Availability: In Stock
£1.37
Contact Us
Let us dent the universe not by a single action but by billions of innovations that define us as humans
  • productWIKI, St Austell Close, Stafford, Staffordshire, ST17 0EE, United Kingdom
  • web@productwiki.co.uk
  • +44 (0) 20 8191 9063
  • Mon-Sat 8:30am - 5:30pm
Information
My Account
Newsletter
Subscribe to our newsletter for latest offers
© Copyright productWIKI 2022 All rights reserved.
Menu