United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Components > Enclosures > Plastic Enclosures
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£2.09
Archived Product
-
Boxes with loose fitting
bases which may be
secured when the box is
fixed to a panel or
bulkhead. Alternatively
the base may be riveted
to the box flange to form
a tamper-proof housing.
The boxes are moulded in
black ABS. Dimensions
mmTypeDimensionsInternalOverallof
basedimensionsheight149 x
28.533 x 25 x 10132105 x
7282 x 64 x 28323116 x
6480 x 60 x 4246Fixing
centresType 1 40x 22 x
2mm dia. holes.Type 2 94
x 5mm dia. holes.Type 3
100 x 42 x 4mm dia.
holes.There is a slot
e.g. for cable entry 7 x
4mm cut near one corner
on Type 2 Box 6 x 4.5mm
on Type 1 Box.
Availability: In Stock
£1.79
Archived Product
- Boxes have slotted
sections inside to accept
PCBs with numerous
mounting pillars for
Availability: In Stock
£7.99
Archived Product
-
Boxes with loose fitting
bases which may be
secured when the box is
fixed to a panel or
bulkhead. Alternatively
the base may be riveted
to the box flange to form
a tamper-proof housing.
The boxes are moulded in
black ABS. Dimensions
mmTypeDimensionsInternalOverallof
basedimensionsheight149 x
28.533 x 25 x 10132105 x
7282 x 64 x 28323116 x
6480 x 60 x 4246Fixing
centresType 1 40x 22 x
2mm dia. holes.Type 2 94
x 5mm dia. holes.Type 3
100 x 42 x 4mm dia.
holes.There is a slot
e.g. for cable entry 7 x
4mm cut near one corner
on Type 2 Box 6 x 4.5mm
on Type 1 Box.
Availability: In Stock
£2.29
Available
- Low cost project box
enclosure designed to
meet IP54
- Ideally suited for
housing
Availability: In Stock
£2.49
Archived Product
- Glossy and matt finish
black plastic boxes
- Moulded in ABS with
brass inserts
-
Availability: In Stock
£3.99
Archived Product
- High impact ABS to give
maximum strength
- Lid is retained by four
countersunk
self-tapping
Availability: In Stock
£2.09
Archived Product
- Matt black mottled
finish plastic boxes
moulded in ABS
- Lipped lid to ensure a
good
Availability: In Stock
£3.79
Archived Product
- High impact ABS to give
maximum strength
- Lid is retained by four
countersunk
self-tapping
Availability: In Stock
£1.99
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£4.29
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£3.79
Archived Product
- A range of potting
boxes for use with our
potting compound see end
of PCB section
-
Availability: In Stock
£0.79
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£2.09
Archived Product
-
A high-quality black ABS
plastic two-part
instrument case with
matching front and back
panels. The two parts are
held together by four
recessed screws and are
tongued and grooved to
make the box rigid when
assembled. Both parts
have six pillars 4mm high
for fixing PCBs and
ventilation grills.
Finished in matt mottled
black. Internal size 170
x 122 x 50mm. External
size 175 x 130 x 58mm.
Availability: In Stock
£4.99
Available
- A Range of hand-hHeld
cases which are ideal for
control devices
- Moulded in
Light
Availability: In Stock
£3.49
Available
- Low cost project box
enclosure designed to
meet IP54
- Ideally suited for
housing
Availability: In Stock
£1.99
Available
- Electronic Instrument
Enclosure ideally suited
for mounting printed
circuit boards
-
Availability: In Stock
£4.19
Archived Product
- Glossy and matt finish
black plastic boxes
- Moulded in ABS with
brass inserts
-
Availability: In Stock
£2.99
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£7.99
Available
- Ideal for mounting
printed circuit boards
horizontally
- Designed to meet IP54
-
Availability: In Stock
£4.09
Archived Product
- Highly adaptable
miniature case
ergonomically designed
for desk dashboard pocket
etc
-
Availability: In Stock
£1.79
Available
- A range of grey
miniature enclosures
moulded from economical
ABS plastic
- 2 PCB
standoffs
Availability: In Stock
£1.69
Available
- Flanged lid is perfect
for wall or shelf
mounting and enclosure
security
- Designed
Availability: In Stock
£3.49
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£8.99
Archived Product
-
A range of glossy finish
grey plastic boxes
moulded in ABS. Lid and
screws to fix lid are
supplied. The lid is
lipped to ensure a good
fit. The insides of all
the boxes have slotted
walls to accept PCBs etc.
Note The walls of the box
have a slight slant from
top to bottom of the
box.Dimensions mm
TypeInternalExternalPX-149.5
x 99.5 x 4054.5 x 104.5 x
42PX-258 x 123.5 x
40.564.5 x 129.5 x
42.5PX-384.5 x 144.5 x
5090 x 149.5 x
52.5PX-4109.5 x 179.5 x
60114.5 x 184.5 x 62.5
Availability: In Stock
£2.09
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£7.99
Archived Product
- Glossy and matt finish
black plastic boxes
- Moulded in ABS with
brass inserts
-
Availability: In Stock
£4.79
Archived Product
- High impact ABS to give
maximum strength
- Lid is retained by four
countersunk
self-tapping
Availability: In Stock
£2.19
Available
- Ideal for mounting
printed circuit boards
horizontally
- Designed to meet IP54
-
Availability: In Stock
£2.89
Archived Product
- A range of potting
boxes for use with our
potting compound see end
of PCB section
-
Availability: In Stock
£0.69
Archived Product
-
A range of three moulded
ABS plastic boxes with a
polished finish. Each box
is rectangular and
consists of two halves.
The lid is retained by 4
x 3.5mm countersunk
plated screws.The upper
part of the box has a lip
running internally around
the edge this is to
ensure that both parts
slot together. Due to the
construction of the boxes
the maximum size of a
rectangular PCB board
fitted horizontally is
less than the internal
dimensions see dimensions
below. Type BM12 is
provided with slots in
the base for holding
vertically either three
or five depending on
orientation 2mm thick
PCBs. Type BM22 has slots
in both halves. Type BM11
is available in white
Order Code CC81C and
black Order Code N46CA.
External mmInternal mmPCB
mmType LW HLWHLWBM11
1438230138762511758BM12
1438244138763811758BM221438258138765411758
Availability: In Stock
£3.29
Available
- Low cost project box
enclosure designed to
meet IP54
- Ideally suited for
housing
Availability: In Stock
£3.79
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£1.39
Available
- A range of grey
miniature enclosures
moulded from economical
ABS plastic
- 2 PCB
standoffs
Availability: In Stock
£2.39
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£2.79
Archived Product
- Moulded high-impact ABS
case with integral PP3
battery compartment
accessible by a
separate
Availability: In Stock
£4.99
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£2.19
Available
- Ideal for mounting
printed circuit boards
horizontally
- Designed to meet IP54
-
Availability: In Stock
£2.59
Archived Product
- Matt black mottled
finish plastic boxes
moulded in ABS
- Lipped lid to ensure a
good
Availability: In Stock
£2.79
Archived Product
- Glossy and matt finish
black plastic boxes
- Moulded in ABS with
brass inserts
-
Availability: In Stock
£3.49
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£1.59
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£1.59
Available
- Flanged lid is perfect
for wall or shelf
mounting and enclosure
security
- Designed
Availability: In Stock
£2.99
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£1.49
Available
- Electronic Instrument
Enclosure ideally suited
for mounting printed
circuit boards
-
Availability: In Stock
£3.19
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£1.59
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£1.59
Archived Product
- Matt black mottled
finish plastic boxes
moulded in ABS
- Lipped lid to ensure a
good
Availability: In Stock
£3.99
Available
- Flanged lid is perfect
for wall or shelf
mounting and enclosure
security
- Designed
Availability: In Stock
£3.49
Archived Product
- Electronic instrument
enclosure designed for
mounting printed circuit
boards
- Integral
Availability: In Stock
£4.49
Available
- Low cost project box
enclosure designed to
meet IP54
- Ideally suited for
housing
Availability: In Stock
£5.49
Available
- Low Cost Instrument
Enclosure designed to
house PC boards
- Moulded in light
grey
Availability: In Stock
£3.79
Archived Product
- Electronic instrument
enclosure designed for
mounting printed circuit
boards
- Integral
Availability: In Stock
£4.49
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£1.39
Archived Product
- Injection moulded black
rectangular boxes ready
to be drilled or cut to
your own design
-
Availability: In Stock
£3.79
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£5.99
Available
- A range of grey
miniature enclosures
moulded from economical
ABS plastic
- 2 PCB
standoffs
Availability: In Stock
£2.09
Archived Product
- A range of potting
boxes for use with our
potting compound see end
of PCB section
-
Availability: In Stock
£0.69
Available
- Low Cost Instrument
Enclosure designed to
house PC boards
- Moulded in light
grey
Availability: In Stock
£4.49
Available
- A Range of hand-hHeld
cases which are ideal for
control devices
- Moulded in
Light
Availability: In Stock
£4.79
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£1.99
Archived Product
- Glossy and matt finish
black plastic boxes
- Moulded in ABS with
brass inserts
-
Availability: In Stock
£4.29
Available
- Flanged lid is perfect
for wall or shelf
mounting and enclosure
security
- Designed
Availability: In Stock
£4.99
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£5.99
Available
- A Range of hand-hHeld
cases which are ideal for
control devices
- Moulded in
Light
Availability: In Stock
£4.99
Archived Product
- Boxes have slotted
sections inside to accept
PCBs with numerous
mounting pillars for
Availability: In Stock
£4.99
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£1.49
Archived Product
- Matt black mottled
finish plastic boxes
moulded in ABS
- Lipped lid to ensure a
good
Availability: In Stock
£3.49
Archived Product
- Electronic instrument
enclosure designed for
mounting printed circuit
boards
- Integral
Availability: In Stock
£2.99
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£8.99
Archived Product
- Electronic instrument
enclosure designed for
mounting printed circuit
boards
- Integral
Availability: In Stock
£3.49
Available
- Provides protection
against dust accumulation
and splashing water
- Moulded in
grey
Availability: In Stock
£3.09
Available
- Low cost project box
enclosure designed to
meet IP54
- Ideally suited for
housing
Availability: In Stock
£3.49
Archived Product
-
A range of three moulded
ABS plastic boxes with a
polished finish. Each box
is rectangular and
consists of two halves.
The lid is retained by 4
x 3.5mm countersunk
plated screws.The upper
part of the box has a lip
running internally around
the edge this is to
ensure that both parts
slot together. Due to the
construction of the boxes
the maximum size of a
rectangular PCB board
fitted horizontally is
less than the internal
dimensions see dimensions
below. Type BM12 is
provided with slots in
the base for holding
vertically either three
or five depending on
orientation 2mm thick
PCBs. Type BM22 has slots
in both halves. Type BM11
is available in white
Order Code CC81C and
black Order Code N46CA.
External mmInternal mmPCB
mmType LW HLWHLWBM11
1438230138762511758BM12
1438244138763811758BM221438258138765411758
Availability: In Stock
£3.49
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£6.99
Available
- Flanged lid is perfect
for wall or shelf
mounting and enclosure
security
- Designed
Availability: In Stock
£4.49
Available
- New colours
- Ergonomically designed
for hand-held comfort
- Available with
or
Availability: In Stock
£5.99
Archived Product
-
A three-part construction
box moulded in grey ABS
with brass inserts a
sloping aluminium front
panel and a separate ABS
base. The base has 3mm
high stand-off bosses for
use with No. 4
self-tapping screws and
the main part has slotted
sides for PCB mounting.
The front panel is
finished in brushed
aluminium and is 1mm
thick. Front panel base
fixing screws and four
stick-on feet are
supplied.Type M8005
dimensions mm External169
x 126 x 7045Internal163 x
121 x 5535Front panel157
x 92Max PCB size in
base160 x 100Type M8007
dimensions mmExternal243
x 187 x 10366Internal237
x 182 x 8555Front
panel225 x 136Max PCB
size in base233.4 x 160
Availability: In Stock
£6.99
Archived Product
- Glossy and matt finish
black plastic boxes
- Moulded in ABS with
brass inserts
-
Availability: In Stock
£7.99
Available
- Low cost project box
enclosure designed to
meet IP54
- Ideally suited for
housing
Availability: In Stock
£4.49
Archived Product
- Black finish box
moulded in ABS with brass
inserts
- Aluminium front panel
flat at
Availability: In Stock
£5.99
Archived Product
- Glossy and matt finish
black plastic boxes
- Moulded in ABS with
brass inserts
-
Availability: In Stock
£7.99
Archived Product
-
Boxes with loose fitting
bases which may be
secured when the box is
fixed to a panel or
bulkhead. Alternatively
the base may be riveted
to the box flange to form
a tamper-proof housing.
The boxes are moulded in
black ABS. Dimensions
mmTypeDimensionsInternalOverallof
basedimensionsheight149 x
28.533 x 25 x 10132105 x
7282 x 64 x 28323116 x
6480 x 60 x 4246Fixing
centresType 1 40x 22 x
2mm dia. holes.Type 2 94
x 5mm dia. holes.Type 3
100 x 42 x 4mm dia.
holes.There is a slot
e.g. for cable entry 7 x
4mm cut near one corner
on Type 2 Box 6 x 4.5mm
on Type 1 Box.
Availability: In Stock
£1.99
Available
- Miniature enclosures
moulded in a choice of
black or grey general
purpose ABS plastic
-
Availability: In Stock
£1.49
Archived Product
-
A range of three moulded
ABS plastic boxes with a
polished finish. Each box
is rectangular and
consists of two halves.
The lid is retained by 4
x 3.5mm countersunk
plated screws.The upper
part of the box has a lip
running internally around
the edge this is to
ensure that both parts
slot together. Due to the
construction of the boxes
the maximum size of a
rectangular PCB board
fitted horizontally is
less than the internal
dimensions see dimensions
below. Type BM12 is
provided with slots in
the base for holding
vertically either three
or five depending on
orientation 2mm thick
PCBs. Type BM22 has slots
in both halves. Type BM11
is available in white
Order Code CC81C and
black Order Code N46CA.
External mmInternal mmPCB
mmType LW HLWHLWBM11
1438230138762511758BM12
1438244138763811758BM221438258138765411758
Availability: In Stock
£3.29
Available
- Electronic Instrument
Enclosure ideally suited
for mounting printed
circuit boards
-
Availability: In Stock
£3.79
Available
- Flanged lid is perfect
for wall or shelf
mounting and enclosure
security
- Designed
Availability: In Stock
£3.29
Available
- Ideal for mounting
printed circuit boards
horizontally
- Designed to meet IP54
-
Availability: In Stock
£2.79
Available
- Ideal for mounting
printed circuit boards
horizontally
- Designed to meet IP54
-
Availability: In Stock
£4.59
Archived Product
- Electronic instrument
enclosure designed for
mounting printed circuit
boards
- Integral
Availability: In Stock
£2.99
Archived Product
-
A range of three moulded
ABS plastic boxes with a
polished finish. Each box
is rectangular and
consists of two halves.
The lid is retained by 4
x 3.5mm countersunk
plated screws.The upper
part of the box has a lip
running internally around
the edge this is to
ensure that both parts
slot together. Due to the
construction of the boxes
the maximum size of a
rectangular PCB board
fitted horizontally is
less than the internal
dimensions see dimensions
below. Type BM12 is
provided with slots in
the base for holding
vertically either three
or five depending on
orientation 2mm thick
PCBs. Type BM22 has slots
in both halves. Type BM11
is available in white
Order Code CC81C and
black Order Code N46CA.
External mmInternal mmPCB
mmType LW HLWHLWBM11
1438230138762511758BM12
1438244138763811758BM221438258138765411758
Availability: In Stock
£3.79
Archived Product
-
A range of glossy finish
grey plastic boxes
moulded in ABS. Lid and
screws to fix lid are
supplied. The lid is
lipped to ensure a good
fit. The insides of all
the boxes have slotted
walls to accept PCBs etc.
Note The walls of the box
have a slight slant from
top to bottom of the
box.Dimensions mm
TypeInternalExternalPX-149.5
x 99.5 x 4054.5 x 104.5 x
42PX-258 x 123.5 x
40.564.5 x 129.5 x
42.5PX-384.5 x 144.5 x
5090 x 149.5 x
52.5PX-4109.5 x 179.5 x
60114.5 x 184.5 x 62.5
Availability: In Stock
£4.49
Archived Product
-
A range of glossy finish
grey plastic boxes
moulded in ABS. Lid and
screws to fix lid are
supplied. The lid is
lipped to ensure a good
fit. The insides of all
the boxes have slotted
walls to accept PCBs etc.
Note The walls of the box
have a slight slant from
top to bottom of the
box.Dimensions mm
TypeInternalExternalPX-149.5
x 99.5 x 4054.5 x 104.5 x
42PX-258 x 123.5 x
40.564.5 x 129.5 x
42.5PX-384.5 x 144.5 x
5090 x 149.5 x
52.5PX-4109.5 x 179.5 x
60114.5 x 184.5 x 62.5
Availability: In Stock
£3.29
Archived Product
-
A range of glossy finish
grey plastic boxes
moulded in ABS. Lid and
screws to fix lid are
supplied. The lid is
lipped to ensure a good
fit. The insides of all
the boxes have slotted
walls to accept PCBs etc.
Note The walls of the box
have a slight slant from
top to bottom of the
box.Dimensions mm
TypeInternalExternalPX-149.5
x 99.5 x 4054.5 x 104.5 x
42PX-258 x 123.5 x
40.564.5 x 129.5 x
42.5PX-384.5 x 144.5 x
5090 x 149.5 x
52.5PX-4109.5 x 179.5 x
60114.5 x 184.5 x 62.5
Availability: In Stock
£2.58
Archived Product
- Injection moulded black
rectangular boxes ready
to be drilled or cut to
your own design
-
Availability: In Stock
£5.99
Archived Product
- A range of potting
boxes for use with our
potting compound see end
of PCB section
-
Availability: In Stock
£0.89
Denmark