Good quality metal shrouded screened UHF TV signal splitters. The splitters are electrically identical but offer different arrangements of plugssockets. Type 1 has one input plug and two output sockets. Type 2 has one input socket and two output plugs. Both types have an insertion loss of 4.5dB and are suitable for use with frequencies up to 1GHz. Isolation between the outputs is 22dB.
feed two receivers from a single LNB. One of the outputs has DC pass and the receiver connected to this supplies power to the LNB. In the case of most systems this master receiver will also select polarity and thus determine the channels available to the slave receiver. Although an inexpensive method of running two receivers from a single dish it is not as flexible as a twin LNB which allows two receivers to select channels of either polarity independently. Frequency range 5MHz to 2GHz. To protect one receiver and its user if a fault should develop in the other this splitter has screw terminals for earthing. A splitter designed to
may be used to combine or separate UHF TV and FM radio signals. Unit has at one end two coax sockets one marked TV and the other FM and a coax plug at the other end which connects to the combined signal. Insertion loss lt1dB. Overall size of plastic body 37 x 40 x 16mm. A plug-in diplexer which
Good quality metal shrouded screened UHF TV signal splitters. The splitters are electrically identical but offer different arrangements of plugssockets. Type 1 has one input plug and two output sockets. Type 2 has one input socket and two output plugs. Both types have an insertion loss of 4.5dB and are suitable for use with frequencies up to 1GHz. Isolation between the outputs is 22dB.