Output current 30A max. 25A continuous Output Voltage 9-15VDC variable 13.8V default setting Variable noise offset function Choice of three output terminals 2530A 4mm sockets at the rear for neatness 3A wire terminals on the front panel & 10A Cigar socket for mobile accessories This is a high efficiency compact lightweight high performance switch mode power supply. br It is engineered to minimize the switching noise specifically for amateur radio use when minor noise do occur it can be eliminated with the Noise-Offset function. br
Includes: pre-set voltage for 13.8V & back lit meter displaying Voltage or Current as standard three output sockets for various shack equipment.br
...

- 24 to 12V DC-DC convertor
- Rated at 30A max 1 x 30A or 2 x 15A across the two DC 12V output sockets
- Built-in cooling


...

Large heavily-sprung clip for use with battery chargers etc. Overall length 74mm maximum diameter of terminal that can be encompassed 15mm maximum gap between teeth of jaws when fully opened 10mm. Current rating 30A with very thick PVC insulating cover available in red or black. ...

Large heavily-sprung clip for use with battery chargers etc. Overall length 74mm maximum diameter of terminal that can be encompassed 15mm maximum gap between teeth of jaws when fully opened 10mm. Current rating 30A with very thick PVC insulating cover available in red or black. ...

- Low power loss high efficiency
- High current capability
- Low forward voltage drop
- High surge capability
- Guardring




...

- Low power loss high efficiency
- High current capability
- Low forward voltage drop
- High surge capability
- Guardring




...

- Low power loss high efficiency
- High current capability
- Low forward voltage drop
- High surge capability
- Guardring




...

30A PWM shunt battery charging SOC battery regulation or programmable to voltage based regulation Boost equalisation & float charging cycles Automatic load disconnection when battery state of charge is low Automatic load reconnection Temperature compensation Field adjustable parameters High & low voltage disconnect LED displays showing battery condition & system status Reverse polarity protection Maximum self-consumption of 5m A Suitable for flooded lead acid or gel batteries Terminal size 16mm Order Code N08GW is for 12V systems Order Code N00HW is for 24V systems This 30 amp shunt charge controller provides a versatile & cost effective solution for small scale battery based systems using the Wren micro turbine as a power input. Samray have taken well proven & trusted PV charge controller technology & adapted it for use with the Wren micro turbine range. Thanks to the unique design of the permanent magnet alternators used on the Wren it is possible to use shunt regulation to prevent the turbine from overcharging the batteries without the need for dump loads. The heart of the controller is based around a microprocessor control providing a selection of different charging cycles using Pulse Width Modulation PWM. The controller also features a self-learning algorithm to provide accurate state-of-charge SOC metering of the battery
- The best insurance for a long battery lifetime. The controller also features a load disconnect facility to prevent the battery from becoming discharged too deeply & therefore further helps protect your battery bank. All of these features are packed into a compact anodised aluminium enclosure requiring a minimal mounting footprint. This allows hassle free connection & operation of the controller & Wren micro turbine. The shunt controller is available for 12V systems Order Code N08GW & for 24V systems Order Code N00HW
...

30A PWM shunt battery charging SOC battery regulation or programmable to voltage based regulation Boost equalisation & float charging cycles Automatic load disconnection when battery state of charge is low Automatic load reconnection Temperature compensation Field adjustable parameters High & low voltage disconnect LED displays showing battery condition & system status Reverse polarity protection Maximum self-consumption of 5m A Suitable for flooded lead acid or gel batteries Terminal size 16mm Order Code N08GW is for 12V systems Order Code N00HW is for 24V systems This 30 amp shunt charge controller provides a versatile & cost effective solution for small scale battery based systems using the Wren micro turbine as a power input. Samray have taken well proven & trusted PV charge controller technology & adapted it for use with the Wren micro turbine range. Thanks to the unique design of the permanent magnet alternators used on the Wren it is possible to use shunt regulation to prevent the turbine from overcharging the batteries without the need for dump loads. The heart of the controller is based around a microprocessor control providing a selection of different charging cycles using Pulse Width Modulation PWM. The controller also features a self-learning algorithm to provide accurate state-of-charge SOC metering of the battery
- The best insurance for a long battery lifetime. The controller also features a load disconnect facility to prevent the battery from becoming discharged too deeply & therefore further helps protect your battery bank. All of these features are packed into a compact anodised aluminium enclosure requiring a minimal mounting footprint. This allows hassle free connection & operation of the controller & Wren micro turbine. The shunt controller is available for 12V systems Order Code N08GW & for 24V systems Order Code N00HW
...

Regulates the charging & discharging cycles of 12V batteries Large LCD screen for easy reading Fixing holes to permanently mount the unit Battery reverse polarity protection Overload & overcharge protection Battery open circuit protection Load short circuit protection Deep discharge protection Suitable for loads up to 30A 500W solar panel A 30A charge regulator designed to control the charging process from the solar panel to the battery as well as the power drawn from the battery to feed the outputs.br All solar panels generally require a voltage regulator to ensure that the battery is not overcharged. The charge regulator is an electronic controller that switches on the connection to the batteries solar cells if the battery is empty & switches off again when the battery is fully charged.br It provides over-charging over-discharging short circuit over-load & reverse polarity protection therefore ensuring your solar system works at best capacity. This solar charge regulator uses the latest Microcomputer-chip for intelligent control & a PWM pulse width modulation charging circuit is used for higher efficiency.br ...