• Receiver uses future proof frequencies•UHF 863.00
- 865.00 M Hz• Channel 70 frequency band• Auto frequency scanning•SMT technology•
...

• Receiver uses future proof frequencies•UHF 863.00
- 865.00 MHz• Channel 70 frequency band• Auto frequency scanning•SMT technology•
...

• Breathtaking 3D colour ILDA laser with 5 different FX in one unit•750 m W high power laser effects• Sound-to-Light operation via built in microphone•3D projection FX / Kaleidoscope FX / Northern Lights FX / Multi-grating FX / Flat beam & in-air tunnel FX• Laser power: red red 150 m W 638 nm/ green 100 m W 532 nm/ blue 500 m W 450 nm• Professional Class 4 laser•ILDA input & through connection• Full DMX512 operation with input & output• Master/ Slave mode • Auto mode• Built-in patterns• Fan cooled operation•LED control display• Tough metal chassis• Adjustable hanging bracket• Safety chain loop• On/ Off switch / Safety Key switch• Mains fused IEC input• Rated voltage: AC100 V-240 V/50 Hz-60 Hz• Dimensions (W x H x D): 290 x 190 x 245 mm• Weight: 4.2 kg ...

• Exceptional 3D ILDA laser with 5 different effects in a single unit!• New diode technology providing an output equivalent to a 1000m W laser• Laser power: 100m W red, 80m W green, 300m W blue• Laser wavelength: 638nm red, 532nm green, 450nm blue• Laser source: red
- diode, green
- DPSS, blue
- diode• Scanning system: 25 Kpps scanner system• Scanning angle: ±15 degrees•ILDA controllable• Full DMX512 operation•19 DMX channels• Auto mode•80 built-in patterns• Sound-to-Light via built-in microphone• Variable mic sensitivity• Master/ Slave mode•LED control display• Fan cooled operation• Tough aluminium chassis• Adjustable aluminium hanging bracket• Safety chain loop• On/ Off switch / Key switch• Mains fused IEC in• Fuse rating: 20mm, 1A slow blow• Rated voltage: AC 100V-240V / 50 Hz-60 Hz• Power consumption: 18w• Leads supplied: UK / Euro IEC• Class 3B laser• Dimensions (Wx Hx D): 290 x 190 x 245mm• Weight: 4.2kg


...

Exceptional 3D ILDA laser with 5 different effects in a single unit New diode technology providing an output equivalent to a 1000m W laser Laser power 100m W red 80m W green 300m W blue Laser wavelength 638nm red 532nm green 450nm blue Laser source red
- diode green
- DPSS blue
- diode Scanning system 25 Kpps scanner system Scanning angle 15 degrees ILDA controllable Full DMX512 operation 19 DMX channels Auto mode 80 built-in patterns Sound-to-Light via built-in microphone Variable mic sensitivity Master Slave mode LED control display Fan cooled operation Tough aluminium chassis Adjustable aluminium hanging bracket Safety chain loop On Off switch Key switch Mains fused IEC in Fuse rating 20mm 1A slow blow Rated voltage AC 100V-240V 50 Hz-60 Hz Power consumption 18w Leads supplied UK Euro IEC Class 3B laser

Dimensions Wx Hx D 290 x 190 x 245mm Weight 4.2kg




...

Amazing 320m W multi-colour 3D kaleidoscope effect laser Laser power 150m W red 50m W green 120m W blue Laser wavelength 650nm red 532nm green 450nm blue Laser source red
- diode green
- DPSS blue
- diode Scanning system 15 Kpps scanner system Scanning angle 20 degrees Full DMX512 operation 17 DMX channels Auto mode 80 built-in patterns with stunning 3D effects Sound-to-Light via built-in microphone Variable mic sensitivity Master Slave mode Fan cooled operation LED display Tough aluminium chassis Adjustable aluminium hanging bracket Safety chain loop On Off switch Key switch Mains fused IEC Fuse rating 20mm 1A slow blow Rated voltage AC100V-240V50 Hz-60 Hz Power consumption 15w Leads supplied UK Euro IEC Class 3B laser

Dimensions Wx Hx D 190 x 160 x 170mm Weight 1.6kg




...

•490m W blue DMX laser with remote control• Fast scanning motor• Full DMX512 operation & 17 DMX channels• Sound-to-light via built-in mic & auto mode• Master/slave modes•LED display• Tough metal chassis• Adjustable metal hanging bracket• Safety chain loop• Safety key on/off lock• Mains fused IEC• Dimensions (W x H x D): 190 x 150 x 190mm • Weight: 1.5kg ...

490m W blue DMX laser with remote control Fast scanning motor Full DMX512 operation & 17 DMX channels Sound-to-light via built-in mic & auto mode Masterslave modes LED display Tough metal chassis Adjustable metal hanging bracket Safety chain loop Safety key onoff lock Mains fused IEC

Dimensions W x H x D 190 x 150 x 190mm Weight 1.5kg

...

• Breathtaking 3D colour ILDA laser with 8 different FX in one unit•1.5W high power laser effects• Sound-to-Light operation via built in microphone•3D projection FX / Wide angle Star Cluster FX / Kaleidoscope FX / Northern Lights FX / Multi-grating FX / Wide beam grating FX / Spirostar FX / Flat beam & in-air tunnel FX• Laser power: red 550m W 638nm / green 150m W 532nm / blue 800m W 450nm• Professional Class 4 laser•ILDA input & through connection• Full DMX512 operation with input & output• Master/ Slave mode • Auto mode• Built-in patterns• Fan cooled operation•LED control display• Tough metal chassis• Adjustable hanging bracket• Safety chain loop• On/ Off switch / Safety Key switch• Mains fused IEC input• Rated voltage: AC100 V-240 V/50 Hz-60 Hz• Dimensions (W x H x D): 290 x 190 x 245 mm• Weight: 4.2 kg ...

• The fast & easy way for custom laser artwork, text & effect creation• Full ILDA file import & export• All Tru-Type fonts available: Convert Windows Tru-Type fonts to laser text• Full colour artwork production for use with multi colour laser projectors•A suite of drawing tools to enable simple & fast image creation• Choose from Point, Freeh&, Polyline, Line, Rectangle, Ellipse & text•A range of Editing tools: including Moving, Re-Scale, Rotate, Flip & Cut & Paste• Drawing area zoom capability:  enables selected part of your artwork to appear on the Drawing Area in a magnified state• Ability to insert & delete points & to recolour artwork• Powerful & easy to use auto-animation features
- Zooms & spins• Auto-Animate enables you to turn a single frame image into a rotating or spinning, moving & size changing effect• Morphing tool: enables you to change or morph one frame into another frame over a sequence of frames in just a couple of clicks• Create True 3D images: use the Editor view (3 views Front, Top & Side) to see your artwork creation• An extra 3D view to see how it would look in reality from different views by rotating the object in real time with your mouse• Import & then open a JPG or BMP file to be your drawing background, which enables you to manually trace the artwork for company logo replication• On-screen preview of laser effects• Comes complete with a detailed PDF manual on the CD-ROM & online tutorials• Compatible with Windows XP, Vista & Windows 7
...